Make your products visible globally with Elite Membership.
I agree to the terms and conditions
Existing User?
Sign In with Email
Remember Me Forgot Password?
New User?
Enter your registered Email ID to get reset password.
Elite Member
Individual Register
AquaTreat 9450 is based on catalyzed sulphite, anti-precipitants, sludge conditioners, alkalinity builder and an organic multifunctional tannin based product. AquaTreat 9450 combines the functions of rapid oxygen scavenging, deposition control and alkalinity control in a single, stable product. AquaTreat 9450 should be dosed continuously into the feed.
AquaTreat-8331 is a broad-spectrum non-oxidizing biocide for use in industrial cooling water systems. AquaTreat-8331 is based on quaternary ammonium compounds and is biodegradable at use levels. AquaTreat-8331 exhibits excellent control over a wide range of pH.AquaTreat-8331 can be directly fed from the container into the basin of the cooling water system or at any other point where good mixing can be ensured.In cooling water systems, AquaTreat-3331 is slowly hydrolyzed to non-toxic products.AquaTreat-8331 is packed in 50 litres HDPE carbouys/200 litres HDPE drums.
AquaTreat-8540 is a unique blend of non-metallic and all organic inhibitors for the control of corrosion, scaling and fouling in open re-circulatory cooling water systems. The product contains organic scale and corrosion inhibitors blended with polyanionic dispersants. AquaTreat-8540 should be fed continuously to ensure that the recommended level of residual is maintained at all times.
AquaTreat-9002 is an alkalinity builder. It also contains organic dispersants and antifoam. AquaTreat-9002 is used for imparting alkalinity to boiler water or for correcting the pH of low alkalinity waters. AquaTreat-9002 is applied to maintain the boiler water alkalinity within limits to be established by WEX, to suit the operating conditions. AquaTreat-9002 may be injected using a dosage pump, dosage pot or directly into the feed tank (whichever is appropriate to the particular plant). AquaTreat-9002 Reduces acid corrosion, Stabilizes protective films, Provides alkalinity control, Reduces foaming.
AquaTreat-9065 is a specially designed dispersant for the prevention of scaling in boilers and in boiler feed lines. It causes calcium and magnesium hardness salts to form a light, mobile floc, easily removed by blow down. AquaTreat-9065 is normally used with asn oxygen scavenger and a phosphate. AquaTreat-9065 is normally maintained at concentrations between 100 and 500 mg/l, in the boiler water. AquaTreat-9065 is not corrosive to steel mixing tanks or dosage pumps, in concentrated or dilute form.
Aquacid 1054EX is an organophosphonate with multifunctional properties like sequestration, deflocculation, threshold inhibition and hydrolytic stability, as a single active ingredient. Aquacid 1054EX is an excellent inhibitor of CaCO3 and CaSO4 precipitation and chelation of transition metals like Fe, Mn, Ni, Co, Cr etc. Aquacid 1054EX is recommended to use in detergent formulations, cooling water and boiler water formulations, sugar mill anti-scalants, textile auxiliary formulations and many other applications where scale / incrustation control and heavy metal chelation are desired.
Aquacid 1054PG is an organophosphonate with multifunctional properties like sequestration, deflocculation, threshold inhibition and hydrolytic stability, as a single active ingredient. It is a granulated, free flowing, low dust product highly suitable for manufacture of detergent tablets, powders and various industrial & institutional cleaners. It is used widely in detergents, I&I cleaners as a co-builder to control adverse effects of hardness salts and iron on cleaning performance. Its high threshold effect properties are useful in various water treatment applications. Aquacid 1054PG is used widely in Household laundry detergents, automatic dish wash products, I&I cleaners, boiler water treatment formulations, pool stain prevention, textile & leather auxiliaries, metal pre-treatment formulations.
Aquapure DF-68 is a concentrated defoamer based on new synthetic technology that affords very efficient foam control during wastewater treatment in paint lines and waste streams high in starch content such as potato processing.This product can be metered in neat or diluted as needed.
Aquapure DF-SI is a concentrated silicone emulsion defoamer formulated for wastewater treatment in industrial applications as well as Kosher food processing.It can be used in wastewater treatment as well as process chemistry-wherever a silicone defoamer can be used.It can be used as a diluted solution injected into the system to be defoamed as well as added tank side for upsets that occur. It can also be metered in for continuous knockdown or sprayed over the foam.It can also be used in concentrated form for heavy foam control.
Aquatreat BW30 is a sludge conditioner and dispersant which can also be used as an on-line cleaner.
Stay updated with the latest chemical industry trends and innovations.
Verification Code has been sent to
Please enter the Verification Code below to verify your Email Address.If you cannot see the email from "noreply@worldofchemicals.com" in your inbox,make sure to check your SPAM Folder