Centrifugal Pumps transfer pumping fluids with high efficiency suitable in dairy, beverage, pharmaceutical

Centrifugal Pumps

109MB Centrifugal Pump

109MB Centrifugal Pump have a single rotating metal impeller. Liquid enters at the center and is thrown outward radially by centrifugal force. The impeller is not in contact with other pump parts resulting in quiet, efficient, pumping action. The flow produced is not positive which permits the discharge line to be shut off completely without danger of overloading motors or bursting lines. Consequently a relief valve is not required. The special pump alloys used provide corrosion resistance to many liquids including water, water solutions, and a wide range of commercial chemicals. The pump uses a mechanical type shaft seal with a Nitrile rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 degree F and 75 P.S.I. Fluoroelastomer (S10) seals and Polytetrafluoroethylene (PTFE) (S11) seals are available for severe solvents and difficult chemicals.


Oberdorfer Pumps

5900 Firestone Drive, Syracuse, NY 13206, USA.

UNITED STATES

1-800-448-1668 / 315-437-0361 /

Send Enquiry
Acid Pump

Acid Pumps are corrosion resistant polypropylene centrifugal pumps. It is excellent for transfer and loading-unloading like HCL, sulphuric acid/alkali, caustic liquid etc. It is also used in scrubbing of corrosive gases like NH2, SO2 etc. The features are its capacity is up to 300 m3/hr, the pump size is DN 25 mm to 150 mm, and further the temperature range is 80 C–140 C.


Jee Pumps (Guj) Pvt. Ltd

Plot No. L - 1 & 2, G. I. D. C., Near Water Tank, Odhav Ahmedabad, Gujarat, India..

INDIA

+91-79-22970345;+91-79-22970347;+91-79-229703 / +91-9376064292;+91-9825064291

Send Enquiry
Back Pullout Type Centrifugal Pump

Back Pullout Type Centrifugal Pump are single stage, end suction, horizontal Centrifugal Pumps. Design confirms to DIN 24255 / ISO 2858 Process Pumps. Flanges as per DIN2533. The specifications are its capacity range up to 80 mtr3/hr, its head range is up to 60 mtrs, it has electrical motor of 0.5 to 25 HP etc. Its application include in Acids, Alkalis industries, Chemical injections, Chemical feed systems etc.


SRS Pumps

Chawl No-B, Pitch No-3, Pimpal Galli, NR Hindustan Naka, Charkop, Kandivali (W), Mumbai - 400 067, Maharashtra, India.

INDIA

+91-9769030295 /+91-8080384053 / +91-22-28688422

Send Enquiry
Back Pullout Type Centrifugal Pump

Back Pullout Type Centrifugal Pumps are widely used to move liquids or slurries in different industries like chemical, pharmaceutical, paper, sugar and many other process industries. Different models are available for various applications.


Corres Flow Engineers

1/20, Kailash Industrial Estate, B/H Hindustan Marbles, JAY Chemical Street, Odhav GIDC, Ahmedabad - 382415, Gujarat, India.

INDIA

+91-9825900974 / +91-9824067288 / +(91)-(79)-22891459 / +(91)-(79)-22874219

Send Enquiry
Back–Pull Out Centrifugal Pumps

Back–Pull Out Centrifugal Pumps are ideal for pumping clear or slightly turbid water, Non-aggressive liquids. The pumps are used for Pumping Brine, Alkaline Solutions, Light Petroleum products, Benzene, Solvents etc. These Centrifugal Pumps are Horizontal Single Stage Volute Casing Pump with top centerline discharge design. Back-pullout design, enables to remove the rotor assembly without disturbing the pipe lines. The direction of rotation of all pumps are clockwise direction from drive end. And also available with gland packing and mechanical seal type design.


Dev Engineers

A-47, Maruti Industrial Estate, Vijay Mill Compound, Opp. Naroda Fire Station, Naroda Road, Ahmedabad - 380 025, Gujarat.

INDIA

+91-79-65495676 /+91-79-26403839 / +91-98240-12742

Send Enquiry
BCP Series Centrifugal Pump

BCP Series Centrifugal Pumps application include in pumping of clear turbid water, chemicals & volatile liquids. The pumps have horizontal back pull out design, single suction and having dimension correspond to Din 24256 / IS 2858 with end suction and top center discharge design. The pumps are also available with semi open /open type impeller for liquid having suspended particle some solid and abrasive in nature. Either soft packed gland or various mechanical seal can be used as per liquid to be handled. Its material of construction is CI, CI/ SS, All SS, Cast Steel etc. and the temperature range is 200 C.


Reliable Engineers

36, Shubh Ind. Estate, Nr. Zaveri Estate, Kathwada - Singarva Road, Kathwada, Ahmedabad, Gujarat, India..

INDIA

+91 9428421299 / +91 9376021299

Send Enquiry
Canned Motor Pump

Canned Motor Pump is a centrifugal pump with hermetically sealed electric motor mounted on single shaft thus eliminating the requirement of mechanical seal or other sealing device. Entire rotating assembly is immersed in the liquid, and motor stator and rotor are isolated from the pumped liquid with corrosion resistant, non-magnetic liner and sleeve. A part of the pumped liquid is by-passed through the motor, for cooling of motor and lubricating the bearing.The high reliability of these pumps makes them suitable for pumping of toxic, hazardous liquids, high temperature, high pressure services in nuclear power plant, Lithium Bromide circulation in refrigeration plant, Ammonia transfer in fertilizer plants, refineries, chemical and pharmaceutical industries and other process industries for handling toxic, hazardous or expensive fluids.


Kirloskar Brothers Limited

Udyog Bhavan, Tilak Road, Pune 411 002, Maharashtra.

INDIA

+91 - 020 - 2444 0770 /

Send Enquiry
Centran G2

Centran G2 is a large, innovative pump that utilizes the patented "bi-directional, self-alignment system", allowing for greatly reduced friction. This allows the pump to run dry for a longer period of time.


Lutz - JESCO America Corp.

55 Bermar Park, Rochester, New York 14624, USA.

UNITED STATES

585-426-0990 / 800-554-2762

Send Enquiry
Centran G3

Centran G3 offers the patented "bi-directional, self-alignment system", therefore allowing dry running operation for extended periods without damaging the pump.


Lutz - JESCO America Corp.

55 Bermar Park, Rochester, New York 14624, USA.

UNITED STATES

585-426-0990 / 800-554-2762

Send Enquiry
Centran TMB

Centran TMB is a single stage, magneticallly driven transfer pump with centrifugal impeller. The pump is made entirely of thermoplastics with outstanding chemical and mechanical resistance. The spindle is made of ceramics, the bearings are reinforced PTFE and the o-ring gasket is made of FKM. Leakage problems are eliminated since a drive magnet on the outside of the casing drives the magnetic impeller inside the hermetic casing.


Lutz - JESCO America Corp.

55 Bermar Park, Rochester, New York 14624, USA.

UNITED STATES

585-426-0990 / 800-554-2762

Send Enquiry
12345...10

Looking to Buy Chemical Equipment? Place Your Request Now!