Centrifugal Pumps transfer pumping fluids with high efficiency suitable in dairy, beverage, pharmaceutical

Centrifugal Pumps

Horizontal Multistage Centrifugal Pump

Horizontal Multistage Centrifugal Pumps application include in very light and non aggressive chemicals transfer. It has working pressure kg/cm2 is 1 to 7, the temperature range ºC is -15 to 75 and its maximum ambient temperature is 50 ºC. All wetted parts of pumps are made from lost wax process (investment casting), so excellent surface finish. Pumps are available in monobloc and in bare type also with flameproof motor. The direction of rotation is clockwise as viewed from the driving end.

Deep Engineering Company

3, Arvind Estate, Part-2, Opp. Ambica Hotel, CTM, Amraiwadi, Ahmedabad - 380 026, Gujarat, India.


+91-9825321099 / +91-79-2585 1714 /

Send Enquiry
Horizontal Polypropylene Centrifugal Pump

Horizontal Polypropylene Centrifugal Pumps are provided with injection wetted and design and further all parts come into contact with liquid are of non-metallic construction. The material of construction is specially selected depending on the specific application. Polypropylene for clear fluids are upto 80 Temp. Glass Filled Polypropylene (GFP) having good resistence to corrosion is used for fluids having suspended parities and can handle Acids, Alkalies, Effluents, Fluids containing suspended particles slurry etc.

Roto Dynamic

362-C, Dr.Nanjappa Road, Coimbatore-641 108, India.


+91-422-2232189 / +91-9843018058

Send Enquiry

HTM PP/PVDF Pumps are magnetic drive centrifugal pumps made of thermoplastic materials (Polypropylene and PVDF) suitable to transfer acids and corrosive liquids. These pumps have been designed with a sealless design where the pump is closed coupled to the motor and the motion occurs through magnetic joints. The external magnet, in fact, is mounted on the drive shaft and it transmits the motion from the motor to the internal magnet connected to the pump impeller which rotates and moves the fluid through the pump. It is the magnetic attraction between the external magnet and the internal magnet which allows the full torque of the motor to be passed to the impeller. The two magnets are separated by a rear casing that creates a hermetic containment of the liquid which has no access to the outside, thereby preventing any leakage of fluid or other fugitive dangerous emissions.

Armek Srl

Via Volta 85/a 20816, Ceriano Laghetto (MB) ITALY.


+39 02 96460406 /

Send Enquiry
Investment Casting Process Pump

Investment Casting Process Pump is a centrifugal pump. The volute casing, impeller and back plate are manufactured from investment (wax) casting process to get good finishing and good flow of liquid at lesser power. It is used in pharmaceutical industry, chemical industry, food processing plant etc. It has long service life, low operating cost and minimum downtime. Its back pull out design offers maintenance friendly and further it is provided with versatile shaft sealing and gland packing arrangement.

Aum Industrial Seals Limited.

E-18, Trimurti Society, New Sama Road Vadodara, Gujarat, India..


+91-265-6451295;+91-265-6532064 / +91-9825047896;+91-9375747896

Send Enquiry
Investment Casting SS316 Centrifugal Pump

Investment Casting SS316 Centrifugal Pumps application include in pharmaceutical industry, chemical industry, food processing plant etc. The advantages are its back pull out design offers maintenance friendly, it has long service life, low operating cost, minimum downtime. It has good quality casting with consistent surface finish hence it gives better efficiency. It is provided with versatile shaft sealing and gland packing arrangement. The proper cooling arrangement for mechanical seal reduces chances of seal failure.

Moniba Anand Electricals Pvt Ltd

4/5,Saphire Building, Ground Floor, Tirupati Park, Sativali Road, Waliv-Vasai(E), Thane-401208, Maharashtra, India.


+91-250-6450425/+91-250-6450426 / +91-250-6450427

Send Enquiry
KNS Series

Standard process pump, covers major duty points for a chemical process industry applications. Pfa/fep lining offers highest corrosion registance. Minimum lining thickness of 6 mm, lining locked by multiple locking grooves. Casing and back plate ingraded cast iron as per astm standard, other meterials like cast steel / stainless steel available on request . Impeller pfa / fep solid injection moulded.

Anticorrosive Equipment Pvt. Ltd.

14/15, Hind Service Industries, Off V. S. Road, Shivaji Park, Mumbai - 400 028,India..


+91-22-24466496 / +91-22-24468340 / nil

Send Enquiry
Mag drive centrifugal pumps

Mag drive centrifugal pumps are sealless, hermetically closed centrifugal pumps. The excellent corrosion resistance make the pumps excellent and reliable for applications in almost all areas of industry. Material choices such as PVDF, PFA and Silica carbide give great opportunities to use the Mag Drive pumps in the chemical and process industry. The important features are it has zero leakage, it has no mechanical seals or packed glands and further it has no external flushing systems.

Verder International B.V.

Utrechtseweg 4a, GG Vleuten.


+31 (0)30 677 92 11 /

Send Enquiry
Magnetic Drive Pump

Magnetic Drive Pump is single stage, single suction, magnetic-driving centrifugal pump, in accordance with international standard API 685. Its prime application is to solve the problem of conveying of inflammable, explosive severely poisonous, precious liquids and corrosive medium. Due to non leakage, no pollution, little vibration and low noise, the pump is rewarded as a real environmental product in petroleum, chemical, fertilizer, power station, metallurgy, food processing and pharmaceutical etc. Its capacity is upto 2000 m3/h, its total head is 300 M and further the pressure is 2.5 Mpa. Its temperature range is -70 °C to 350 °C.

Versa Pump

92 Railway Street South, Altona - Victoria 3018, Australia.


+61-3-90947905 /

Send Enquiry
MDN Series Normal Priming Centrifugal Pumps

MDN Series Normal Priming Centrifugal Pumps are a normal priming, magnetically coupled centrifugal pump. In the MDN Pump Series, the motor power is transmitted contact free and abrasion-free with a magnetic coupling through the closed housing wall (“Slot-pot”) to the pump impeller. An encapsulated counter-magnet is built-inside the impeller. Therefore, a rigid shaft passage is not necessary. The MDN Pump Series is particularly suitable for toxic or environmentally hazardous media. A small amount of gas in the liquid can also be transferred without disrupting the liquid flow. The specifications are it has max. output rate 140 l/min, it has max. discharge head of 14m, it has motor power 0.55 KW and its material of construction is PVDF.

Schmitt-Kreiselpumpen GmbH & Co KG

Einsteinstr. 33, D-76275 Ettlingen, Germany.


+49 (0) 72 43 / 54 53 - 0 /

Send Enquiry
Mechanical Seal Centrifugal Pumps

Mechanical Seal Centrifugal Pumps is composed by a static ring and a rotating ring placed on the pump shaft which is directly coupled to the motor shaft. The two surfaces sliding together need to be lubricated and the seal lubricant is the liquid itself that is being pumped. The features are the thermoplastic pumps are made in PP or PVDF, it has capacity up to 58 m3/h and further has head up to 38 mlc. It is widely used in chemical, petrochemical, pharmaceutical industries and its typical applications include in high corrosive liquids, liquids with solids etc.

GemmeCotti Srl

Via A. Volta 85/A, 20816 Ceriano Laghetto MB, Italy.


+39 02.96460406 /

Send Enquiry