Check Valves designed with upstream, midstream, downstream processes used in power industries.

Check Valves

72700 Check Valve

72700 Check Valve or non return valve, is a valve that prevents the fluid from flowing backwards and ensures that it flows in only one direction. It can be used to prevent the loss of prime of the pump and water hammer. It is used in the food-processing, cosmetics, pharmaceutical and chemical industries as well as in the beverage, wine and oil production.


Inoxpa India Private Limited

Pune- 411023, Maharashtra, India..

INDIA

+91 20-64705492 / +91-20-64705212

Send Enquiry
Cast Steel Swing Check Valve

Cast Steel Swing Check Valve is widely used in industrial chemical piping, oil, gas, petrochemical plant etc. The design offers a low-pressure drop operation, which makes the valve more energy efficient. The features are it is provided with bolted cover, it has swing type disc, it has ground & lapped seating surface, it is suitable for the horizontal & vertical pipe runs and the valves are available in both flange end & butt weld ends. Its size range is from NPS 1" ~ 12" (DN 25mm to 300mm) and the manufacturing standard is according to BS 1868.


Hyper Valves

R-2 & R-3, Arbuda Estate, Near Muthia Railway Crossing G.I.D.C., Phase-2 Naroda, Ahmedabd-382330.

INDIA

+91-79-22812065 / +91-9825047442

Send Enquiry
Check Valve

Check Valves prevents reversal of direction of flow through a line. They offer quick automatic reactions to flow changes, the pressure of the flowing fluid keeps the valve open & any reversal of flow closes it. The valves are used in systems in which frequent flow reversals may be encountered and the valves may have a tendency to chatter. This can be corrected by equipping the valve with an outside lever & weight. It may be used to add weight to disc quicker closing against back flow preventing water hammer & excessive shock pressure.


Shree Chamunda Valves Pvt. Ltd.

23/A, Gopal Estate, B/h. Harshad Chambers, Vallabhnagar, Odhav, Ahmedabad-382415.

INDIA

+91-79-22970963 / +91-9925046278

Send Enquiry
Check Valve

Check Valves are widely used in the hydrocarbon, energy and process industries. Its size range from ½” up to 56“ (DN 15 up to DN 1400) and pressure rating is ASME 150# to 2500#. Its design standard is according to API 602, API 6D, MESC SPE 77 / 132, BS 1868, DIN 3356, ISO15761. The valves can be designed in a special version suitable for cryogenic service. In this case, all the materials and technical features are designed to withstand minimum design temperature required by the customer, down to cryogenic -196°C.


Hawa Valves (India) Pvt. Ltd.

R16, TTC Industrial Area, Rabale, Thane Belapur Road, Navi Mumbai (New Bombay) – 400 701 INDIA..

INDIA

+91-22-67760000 / +91-22-27697766 /

Send Enquiry
Check Valves

Check Valves are forged from fine grain steel and are available with threaded, socket weld, or flanged ends. Its important features are it has hard faced seats, it consists of spiral wound gasket and further it can be provided with bolted bonnet, seal weld bonnet, no bonnet, or union bonnet. Its application areas include industries like Chemical, Pharmaceuticals, Plating etc. It is widely used in Acid Transfer, Water Treatment, Bleach Chemicals etc.


Flowserve

5215 N. O'Connor Blvd., Suite 2300 Irving, TX.

UNITED STATES

+(972)-443-6500 /

Send Enquiry
Check Valves

Check Valves, also referred to as Extraction Check Valves, prevent back flow in steam and water lines to protect valuable equipment from damage. Used in extraction lines from steam turbines to feed water heaters, heating systems or process equipment, these extraction check valves are engineered for exceptional reliability. Where reverse flow is desired, the valves can be configured to remain open until closed by a cylinder actuator on signal. It is widely used in chemical and petrochemical plants in reactor emergency shut off, compressor kick-back, and suction check.


Schutte & Koerting

2510 Metropolitan Drive, Trevose, PA..

UNITED STATES

+215-639-0900 /

Send Enquiry
chemical check valve

Chemical check valve having good quality,it is size is 1/2"-4" and these Nomiat Pressure is 1.6Mpa.


Yuhuan Jida Brass Co., Ltd.

Pengzai Industrial Area,Chumen,Yuhuan,Zhejiang,China..

CHINA

86-576-87417598 /

Send Enquiry
Cylindrical Check Valve

Cylindrical Check Valves are dimensionally precise, highly resistant to chemicals & corrosive chemicals. These have high tensile & impact strength and fine-finishing. These valves have valuable application in the industries for the avoidance of flow in the divergent direction in the pipeline sustaining the flow in one track. These are perfectly & compactly designed to deliver finest performance in a fail proof manner.


Beena Engineering Works

1, Ajmeri Udyog Estate, Dhobighat, O/s. Shahpur Gate, Behind Municipal Quaters, Ahmedabad - 380004, Gujarat, India..

INDIA

+91-79-25625382 / +91-79-25627177 / +91-9824395182 / +91-94273161371

Send Enquiry
Disc Check Valve

Disc Check Valves are widely demanded by the chemical industries, sewage treatment and irrigation systems besides power plants for idyllic flow regulation of the industrial fluids. These offer rapid opening & shutting. These are dimensionally precise and very compact hence easy to install and do not consume large space. These are also easy to operate and need least maintenance. Further the valves have good endurance and are very affordable.


Beena Engineering Works

1, Ajmeri Udyog Estate, Dhobighat, O/s. Shahpur Gate, Behind Municipal Quaters, Ahmedabad - 380004, Gujarat, India..

INDIA

+91-79-25625382 / +91-79-25627177 / +91-9824395182 / +91-94273161371

Send Enquiry
Disc Check Valve

Disc Check Valves are demanded for their features like low maintenance, durability, corrosion resistance, perfect finish, easy installation and high tensile strength. Due to these features, the products are used in chemical, fertilizer, petrochemical, pharmaceutical and other industries. Its MOC is ASTM A 351 CF8M and further the size range is from 15 to 100 NB.


Unitek Valves

S No. 24, Uttarshiv Goteghar Sill Phata, Mumbra Panvel Road, New Mumbai, Thane-400612, Maharashtra, India.

INDIA

+91-9821390936 / +91-9167531261 /

Send Enquiry
123

Looking to Buy Chemical Equipment? Place Your Request Now!