Chemical process equipment – Buy cooling towers, chillers, heat exchangers, compressors, blenders

Chemical Process Equipment

Gate Valve

Gate Valves are used extensively throughout the hydrocarbon, energy and process industries. It have size from 2” up to 88“ (DN 50 up to DN 2200) and the pressure rating: ASME 150# to 2500#. Its design standard is according to API 602, API 600, MESC SPE 77 / 101, MESC SPE 77 / 102, ASME B16.34. It can be designed in a special version suitable for cryogenic service. In this case, all the materials and technical features are designed to withstand minimum design temperature required by the customer, down to cryogenic -196°C.


Hawa Valves (India) Pvt. Ltd.

R16, TTC Industrial Area, Rabale, Thane Belapur Road, Navi Mumbai (New Bombay) – 400 701 INDIA..

INDIA

+91-22-67760000 / +91-22-27697766 /

Send Enquiry
Gate Valve

Gate Valves are available in variety of types, sizes, pressure ratings and materials, with wafer type, screwed, welded or flanged connections. The valve acts like a Gate to stop or allow the flow through the valve. The valve can be opened by lifting the wedge out of the path of the flow Gate valves are actually designed for closing & opening full, so they are not suitable for the throttling purpose. When the Gate valve is fully open, there is no obstruction in the flow path, resulting in very low pressure drop, & they are often suitable for the Hot Tapping & Pigging. The valves are actually designed for use with the flow of liquids and gases but there are variation to cope with the specific requirements.


Flowjet Valves Pvt. Ltd.

Plot No. 519, Phase II, GIDC, Kathwada, Ahmedabad-382430. India.

INDIA

+91-79-29706807 / +91-79-29706808 / +91-79-29706809

Send Enquiry
Gate Valves

Gate Valves are used for isolation services in Oil & Gas, Petrochemical, Fossil Fuel and Nuclear Power, Steel, Chemical, Fertilizer, Mining and Solar sectors offering excellent shut-off features and minimal pressure loss through the valve. The valves are primarily designed to start or stop flow, and when a straight-line flow of fluid and minimum flow restriction are needed. In service, these valves generally are either fully open or fully closed. The disk of a gate valve is completely removed when the valve is fully open; the disk is fully drawn up into the valve bonnet. This leaves an opening for flow through the valve at the same inside diameter as the pipe system in which the valve is installed. A gate valve can be used for a wide range of liquids and provides a tight seal when closed.


Forbes Marshall Pvt Ltd

P B # 29, Mumbai-Pune Rd., Kasarwadi, Pune 411 034, Maharashtra, India.

INDIA

+91-20-39858555 /

Send Enquiry
Gate Valves

Gate Valves is a valve that opens by lifting a round or rectangular gate/wedge out of the path of the fluid. It is designed for high pressure and high temperature applications, for a wide range of fluids except slurries and viscous fluids. These valves are generally used in the wide open or closed position, are not recommended for throttling service because throttling causes disc chattering and vibration which is likely to erode the seating surface and cause leakage. Its application include in Petroleum, Power Generation, Chemicals, Fertilizer, Steel industry etc. Its temperature range is from -100 °C to 800 °C and pressure rating is vacuum upto 621 BAR.


Fluidline Valves Co. Pvt. Ltd.

401 - A, Poonam Chambers, 115, Dr. Annie Besant Road, Worli, Mumbai 400 018 India.

INDIA

+91-22-24944057 / +91-22-24942494 /

Send Enquiry
Gauge Valve

Gauge Valves include multiport or block and bleed style for pressure gauge isolation, calibration and venting. Metal and soft seat options are available for use in gas or liquid service and rated up to 10,000 psi (690 barg). The material of construction is CS, SS, Monel, Hastalloy, Duplex and High Nickel alloys. Its connections is ¼” to 1” threaded, welded, flanged or compression ended. The pressure (max) is 10,000 psig (690 barg) and the temperature (max) is 1000 °F (538 °C).


Colson X-Cel Ltd

Park Works, Park Road, Elland, West Yorkshire, HX5 9HN, England, United Kingdom.

UNITED KINGDOM

+44 (0) 1422 377999 /

Send Enquiry
Gear Operated Butterfly Valve

Gear Operated Butterfly Valve meet various customer demands including Power plants, Distillery, Paper and Pulp Industry, Sugar Industry, HVAC, Water treatment plants, Construction Industry, Chemical and Pharmaceutical Industries. Its operating temperature range is from -30ºC to 130ºC and further its body type is single piece, short wafer or wafer lugged.


CRI Pumps Private Limited

480-481, Sathy Main Road, Kurumbapalayam, SS Kulam Post, Coimbatore-641107, Tamil Nadu, India.

INDIA

+91-422-3027000 / 1800 200 1234 /

Send Enquiry
Gear Operated Offset Disc Design Butterfly Valve

Gear Operated Offset Disc Design Butterfly Valves are reliable, maintenance free, tight shutoff, and control valves. It can be utilized universally. Its application range includes, process in the chemical, pharmaceutical, power, plant, paper, sugar, drilling rigs, cooling, water treatment plants, & even in the construction industries for compress air, water, fuel, oils, gases, slurries with suitable seat (lining) & disc material for a wide range of pressure & temperature. The size available is 40mm to 1200mm.


Flow-Tek Valves & Controls

Plot No. 172-173, Road No. 4, G.I.D.C. Estate, Kathwada, Ahmedabad - 382 430, Gujarat, India.

INDIA

+91-9824080899 /

Send Enquiry
Gear pump- L

Gear pump- L are used in all types of manufacturing industries for the transportation of both thin and thick liquids, from diesel fuels to chocolate.It has low viscosity and high efficiency.


SPX Flow Technology

13515 Ballantyne Corporate Place Charlotte, North Carolina 28277 United States.

UNITED STATES

(704) 752-4400 /

Send Enquiry
Gear Pump-G

Gear Pump-G are used in all types of manufacturing industries for the transportation of both thin and thick liquids, from diesel fuels to chocolate.This is used for general purpose.


SPX Flow Technology

13515 Ballantyne Corporate Place Charlotte, North Carolina 28277 United States.

UNITED STATES

(704) 752-4400 /

Send Enquiry
Gear Pump-H

Gear Pump-H is used in high demanding applications.They are used in all types of manufacturing industries for the transportation of both thin and thick liquids, from diesel fuels to chocolate.


SPX Flow Technology

13515 Ballantyne Corporate Place Charlotte, North Carolina 28277 United States.

UNITED STATES

(704) 752-4400 /

Send Enquiry

Looking to Buy Chemical Equipment? Place Your Request Now!