Chemical process equipment – Buy cooling towers, chillers, heat exchangers, compressors, blenders

Chemical Process Equipment

KF Series Centrifugal Pumps

KF Series Centrifugal Pumps offer chemical resistance, wider hydraulic range for higher head and flow applications.The non-rotating shaft design eliminates the need for internal fasteners and keyed parts.These pumps have fewer parts and require no buffer fluid or gas purge systems.


Ansimag Incorporated

Elk Grove Village, Illinois, United States.

UNITED STATES

nil /

Send Enquiry
C Series Horizontal Pumps

C Series Horizontal Pumps are designed specifically for continuous chemical duty service.They are rugged, precision molded, and feature dynamically balanced, enclosed impellers.They are used in Pumping for aeration, agitation, filtration, recirculation, spraying and transfer of Plating,Electronics,Chemical Processing,Water Treatment and Pollution Control.


Webster Pumps

4126 Orleans St. McHenry, IL 60050.

UNITED STATES

815-578-0100 /

Send Enquiry
Polypropylene Pump

Polypropylene Pumps are used in effluent treatment plants, scrubbing corrosive gases, and water jet ejectors. The specifications are it has capacity up to 120 M3 / Hr., it has head up to 50 meters, it has temperature up to 70° centigrade for P.P., it has up to 100° centigrade for U.H.M.W.P.E., it has up to 130° centigrade for PVDF and further has speed up to 3000 rpm. The features are it is suitable for higher working pressures, it has direct or gear drive, it has stable characteristics and further has minimum maintenance required.


Parekh Engineering Company

No. 308, Bhaveshwar Arcade, Opposite Shreyas Cinema, , L. B. S. Marg, Ghatkopar West Mumbai, Maharashtra, India..

INDIA

+91-22-67974901;+91-22-40110905;+91-22-679749 / +91-9892218186;+91-9821333882

Send Enquiry
XM Series Chemical Dosing Pump

XM Series Chemical Dosing Pumps are motor driven and the diaphragm is actuated by a gear drive. All the shafts are loaded on "Twin Bearing Support" (TBS) which results in precise & consistent operation. Moreover, wear & tear is minimal due to proper meshing of well lubricated worm shaft and worm wheel. Flow rate can be adjusted between 10% to 100% on the rated capacity against the rated back pressure by a stroke adjustment knob. The pump can also be automated to accept 4-20mA through a variable frequency drive.


Asha Technocrats

GF-10, Savan Mall, S.G Highway, Sola Road, Ahmedabad -380060, Gujarat, India.

INDIA

+91 96620 57782 / +91 85111 37186 / +91 96012 55620

Send Enquiry
Dry Motor Submersible Pump

Dry Motor Submersible Pump has passage capacity of upto 100 mm and motor capacity upto 500 HP. The benefits are it has noiseless pumping, it has lower footprint than horizontal pumps, it is aesthetically pleasing, it has easy commissioning procedures and further no requirement of motor shaft alignment. The specifications are it has flow capacity upto 8,000 m3/hr, it has head upto 150 m.l.c., it has delivery size upto 700 mm, it has temperature upto 45 deg.C and has specific gravity upto 105. It is widely used in acid plants, petrochemicals, refineries, pharmaceuticals & bulk drugs etc.


Kishor Pumps

A-13/H, MIDC, Pimpri, Pune - 411018, India..

INDIA

+91-20-27473570 /

Send Enquiry
PPS Vertical Chemical Pump

PPS Vertical Chemical Pump is totally rigid and vibration free, capable of providing many years of trouble free service. The PPS range has been built specifically to deal with chemical processing, effluent treatment, metal finishing, pollution control, corrosive liquid transfer and re-circulation. The wetted parts are fully corrosion resistant being machined from solid plastics. The PPS range features suspension systems with integral stiffening bars to prevent longitudinal movement. A feature of the PPS range is the ability to adjust the impeller gap from above the mounting plate, without having to remove the pump from the sump or tank. Its max capacity rate is 250m³/hr (4166 l/m) and the max discharge head is 48 meters.


Crest Pumps Ltd

7 Queensway, Stem Lane Ind Est, New Milton, Hampshire, UK.

UNITED KINGDOM

01425 627700 /

Send Enquiry
FMI Valveless Metering Pump

FMI Valveless Metering Pumps have a unique design in which the piston rotates as well as reciprocates thus eliminating the NRV’s in both suction and discharge. The piston and cylinder are made of high quality 99.99% pure alumina ceramic which gives them a life of almost 5 years. These pumps are very accurate and consistent with flow rates ranging from 0.12 ml/min to 2200 ml/min. These pumps can also handle viscous fluids and mercury.


Varicon Pumps & Systems Pvt Ltd

10, P.K.M.Road, Athipet, Chennai, Tamilnadu, India.

INDIA

+91 - 44 - 26350628 /

Send Enquiry
Electromagnetic Dosing Pump E-Series

Electromagnetic Dosing Pump E-Series are solenoid driven and are controlled electronically by a PCB. The only moving part in the pump is the solenoid armature, with a maximum movement of 1.25 mm. There are no rotating parts in the pump and hence, no lubrication is needed. The wear and tear is negligible and the pump is virtually maintenance free. The diaphragm is made up of high quality nylon fabric reinforced EPDM with moulded steel core and has layer of PTFE on the liquid contact area. It has 0.156 LPH to 11.40 LPH capacity and further has maximum pressure of 20 Kgf/cm2. The features are it has compact size, it has discharge rage accuracy ± 1% and further it handles any chemical.


Sandur Fluid Controls Pvt. Ltd.

# 85/N, Belavadi Compound, 2nd Stage, Industrial Suburb, Yeshwanthpur, Bangalore - 560 022, India..

INDIA

+91-80-23470471 / +91-80-23470473 / +91-80-41228272 / +91-80-40979496

Send Enquiry
Technical Bulletin on Texel Lined Magnetic Drive P

The bulletin includes photos and technical illustrations as well as detailed information on product specifications, materials of construction, benefits, capacities, and dimensions.


GRACO INC.

88-11TH AVENUE NE, Minneapolis, Minnesota, 55413 USA..

UNITED STATES

nil / nil

Send Enquiry
Horizontal Chemical Process Pump

Horizontal Chemical Process Pump is widely used for handling chemicals, acids, slurries, solvents, hot water etc. Its application include in petrochemicals, refineries, paper plants, steel plants, effluent & sewage plants, textile plants, molten sulphur service etc.


Superflow Pumps Pvt Ltd

A-498, Mahape Midc Rd, MIDC Industrial Area, Mahape, Navi Mumbai, Maharashtra 400701, India.

INDIA

+91-22-2778 2842 / +91-22-2778 2843 /

Send Enquiry

Looking to Buy Chemical Equipment? Place Your Request Now!

www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X