Chemical process equipment – Buy cooling towers, chillers, heat exchangers, compressors, blenders

Chemical Process Equipment

Cryogenic Valve

Cryogenic Valves are used in the transportation line of liquefied gas at very low temperature like liquefied natural gas, liquefied petroleum gas or liquid nitrogen from -200 °C to +65°C. All materials used are selected for their suitability to function at cryogenic temperatures. All valves are degreased for oxygen duty. It is available in both manual and actuated design.


Famat SA

Rue des Jordils 40, CH - 1025 St-Sulpice, Switzerland..

SWITZERLAND

+41 21 695 26 26 /

Send Enquiry
567 BioStar Control Valve

567 BioStar Control Valve is used for controlling the inflow and outflow of bioreactors in the pharmaceutical industry. It is available in the nominal sizes DN 8 to DN 20. The body is manufactured, as standard, from block material with a grade of surface finish of Ra 0.4 µm. In addition to the PTFE diaphragm, another seal made from FKM is used. It is the new, safe solution for media controls from 0.08 to 4.1 m³/h. The valve is also optimally equipped when it comes to hygienic safety. It meets both the standards of the EHEDG cleaning test and the standards in accordance with the American 3A definition.


GEMU Gebruder Muller Apparatebau GmbH & Co. KG

Fritz-Muller-Strabe 6-8, 74653 Ingelfingen-Criesbach, Germany.

GERMANY

+49-79 40-123 0 /

Send Enquiry
Pressure Seal Valve

Pressure Seal Valves are designed for high pressure, high temperature applications like steam-generation, industrial/chemical processing plants and thermal power generating plants. The features are it has outside screw and yoke construction, it has flanged end or buttwelding end, the valves are provided with back seating arrangement and further renewable, seal welded seat ring or integral seat ring (cast S.S. only) available. Its face to face and end to end dimensions conform to ASME B16.10 / BS 2080 / DIN.


Peco Valves Pvt. Ltd.

B-005, Raj Cresent Society, Ground Floor, Royal Complex, Eksar Road Borivali (W), Mumbai: 400 091.

INDIA

+91-22-28903200 / +91-22-28924111 / +91-22-28908449

Send Enquiry
3/2 Normally Closed Solenoid Valve

3/2 Normally Closed Solenoid Valves body material is SS 316/ aluminium hard anodized. It has pressure range from 0-150 bar. The media is gas, oil, air etc. The ports are threaded, sub base mounted. The Type provided is 30150 Subbase Port, 30152 Threaded Port.


Rotex Automation Limited

987/11, GIDC Estate, Makarpura, Vadodara-390 010, Gujarat, India..

INDIA

+91-265 2638136 ;+91-265 2638795 / +91-265 2638746

Send Enquiry
Pressure Reducing Valve

Pressure Reducing Valves are manufactured using high quality raw material and advanced technology. These products are demanded for their features like low maintenance, durability, corrosion resistance, perfect finish, easy installation and high tensile strength. Due to these features, the products are used in chemical, fertilizer, petrochemical, pharmaceutical and other industries. Its MOC is SG Iron/Gun Metal and further its sizes are 15 to 25 NB, Scr (BSP/NPT).


Unitek Valves

S No. 24, Uttarshiv Goteghar Sill Phata, Mumbra Panvel Road, New Mumbai, Thane-400612, Maharashtra, India.

INDIA

+91-9821390936 / +91-9167531261 /

Send Enquiry
Gas Solenoid Valve

Gas Solenoid Valve are broadly demanded in chemical, food processing and many more industries. This valve is generally used to control & regulate the flow of liquid & gases. The features are it is precisely designed, it has easy installation, it withstand high pressure and further has durability. These valves are available in different models.


Credence Engineers & Co.

F-17, James Plaza Square, Asian Paint Circle, GIDC, Ankleshwar - 393002, Gujarat, India.

INDIA

+91-2646-250055 / +91-7874080555

Send Enquiry
Fiberglass Roof Ventilator

Fiberglass Roof Ventilator are used for acid fumes ventilation to purify fresh air inside. Fiberglass Roof Ventilator are best suited for chemical plant as they provide longer service life even in presence of corrosive fumes. These are designed in compliance with the international standards of quality, these ventilators utilize wind energy as rotating power to induce air flow inside.


Z Fabrics

No. 464, Potode House, Kothi Road, Mahal Nagpur - 440002, Maharashtra, India..

INDIA

+(91)-9970138005 / +(91)-9764915010 / +(91)-8373905663

Send Enquiry
Air Receivers

Air Receivers are manufactured using quality approved raw material, these products find their wide applications in rubber factories, chemical plants, shipyards, fertilizer plants, paper mills and sewage disposal plants.


AAB Heat Transfer Pvt. Ltd.

Plot No. 375, Sector - 24 Faridabad, Haryana,India.

INDIA

+91-129-2233183 /+91-9810084139 / +91-9818555250 / +91-9910084139

Send Enquiry
Air Handler- Hyperion

The Hyperion air handler is built unlike anything the market has ever seen. It is constructed more like a refrigerator than a typical air handler, with insulation between the walls of the innovative Air-Tite™ II cabinet. This insulation prevents condensation that may cause damage to the air handler itself or a consumer’s home. In addition to eliminating “sweating,” the cabinet also eliminates the loose fibers from fiberglass insulation that may enter the airstream with other air handlers. Hyperion’s exclusive double-wall construction provides families with peace of mind and cleaner, safer indoor air.


Trane

800-E Beaty Street Davidson, NC,USA..

UNITED STATES

1-704-655-4000 / nil

Send Enquiry
Rotary Autoclave

Rotary Autoclave for Reclaim Rubber, Reclaim Rubber Plant, Rotary Autoclave for reclaimed rubber industry for high temperature and high pressure cooking of rubber crumbs and to to recycle the same in to Rubber sheets in subsequent process. The Rotary Autoclave is made from boiler quality plate with limpet coil for heating and with hollow agitator with blades, driven by motor and gear box. These Rotary Autoclaves are designed to work at a pressure of 300 psi. and at a temperature of 250°C.Fabricated from seamless pipe & two end stubs of EN-8 are welded at both ends. The shaft is machined in assembly. Suitable keyways and seat is provided to seat the flanged hub accurately. These blades are specially designed in a way that they turn and move the material longitudinally so that the same particle do not remain in contact with surface for long time & uniform heating is provided to the material inside. Steel casted and specially designed, consist of jaw arrangement through which the mouth can be locked & unlocked by a suitable gearing arrangement at top and at bottom with a counter weight and gearing arrangement for easy open and for tight closer. Rotary autoclave Various models are available in capacity 2000, 3000, 3500 & 4000 kgs/batch.


NSI Equipments Private Limited

Opposite Block Development Office, Delhi Road, Meerut, Uttar Pradesh - 250 002,India.

INDIA

+91-121-2519225 / +91-9897700681 / +91-121-2529956

Send Enquiry

Looking to Buy Chemical Equipment? Place Your Request Now!

www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X