Chemical process equipment – Buy cooling towers, chillers, heat exchangers, compressors, blenders

Chemical Process Equipment

SG Flue Gas Heat Exchanger

SG Flue Gas Heat Exchanger is used in all processes with the presence of large amounts of dust in the discharge air such as in food, chemical, wood and paper. The specially designed Flue Gas Heat Exchanger with integrated CIP system, which is well suited for dust loaded air, is to be installed in the actual discharge channel. The circulation system transports the recovered energy, which otherwise is lost, from Flue Gas Heat Exchanger to the pre-heater in the fresh-air conduit. It is a compact heat exchanger with an average ratio of 150 – 200 m² heating surface per m³ volume which makes it possible to install it in practically all existing plants.


Sehenstar Energy Technology (Suzhou) Co., Ltd.

C605, Xi'an Jiao Tong University Science Park, Xiangcheng District, Suzhou, China.

CHINA

+86-0512-69572850 /

Send Enquiry
Shear Plough Mixer

Shear Plough Mixer provides highly efficient mixer for super fast mixing of powders, granules with or without addition of liquids and pastes of low viscosities. It is widely used in Chemical, Pharmaceutical, Food and Coating Industries. The mixer consist of a cylindrical shell fitted with ploughs. The mixer creates a hurling and whirling three dimensional effect. Lump breakers are installed at the bottom of the cylinder for breaking of lumps and agglomerates.


S. F. Engineering Works

Shanta Industrial Estate, Shed No.1, B/h Dodhia Petrol Pump, Near Safari Hotel, W.E. Highway, Kashimira, Mumbai, India..

INDIA

+91-22-28459899 / +91-22-28457239 / +91-22-28457240

Send Enquiry
Shell & Tube Heat Exchanger

Shell & Tube Heat Exchanger are suitable for heat transfer fluids, lubricating oil, power pack oil and other process coolants. It is commonly used in oil refineries and other large chemical processes. In this model, two separated fluids at different temperatures flow through the heat exchanger, one through the tubes (tube side) and the other through the shell around the tubes (shell side). Several design parameters and operating conditions influence the optimal performance of a shell& tube heat exchanger. The advantages are it has low investment, operation and maintenance costs, it provides highly efficient heat transfer (K- values on average 3-5 times higher than in case of bare-tube heat exchangers) and further has asymmetrical flow gap available for the most cost effective solution.


HiTech Equipments

/1A, Palaniyappa Layout, Madukarai Road, Sundarapuram, Coimbatore - 641 021. TN, India.

INDIA

+91-8012588500 / +91-9150415880 /

Send Enquiry
Shell & Tube Heat Exchanger

Shell & Tube Heat Exchangers are commonly utilized for effective heat transfer between two mediums. These find a wide application in various heavy engineering industries such as chemical plants, petrochemical plants, petroleum refineries, natural gas processing etc. These products are fabricated using superior material such as stainless steel, copper, mild steel and aluminum. The M.S. shells are fabricated as per ASME Codes table VIII.


Mangesh Industries

J - 43, M. I. D. C., Ambad, Nashik, Maharashtra, India.

INDIA

+91-92251 27214 / +91-92251 27213 / +91-95525 74370 / +91-9890537535

Send Enquiry
Shell & Tube Heat Exchanger

Shell & Tube Heat Exchangers are most commonly used in almost all industries like Refineries, Chemical plants, Fertilizer plants, Genset units, Oil & Gas and Shipping. Typical use of Heat Exchanger is to cool or heat the fluids or gases. It is also provided in types such as Duplex Coolers, Shell in series and shells in parallel type heat exchangers.


Radiant Heat Exchanger Pvt. Ltd.

S-116/2, MIDC, Bhosari, Pune – 411026 Maharashtra, India..

INDIA

+91-20407-18000 / +91-20407-18026 /

Send Enquiry
Shell & Tube Heat Exchanger

Shell & Tube Heat Exchanger is used to transfer heat from one medium to another and is demanded in numerous industries like chemical, food, electrical and such others. Shell & Tube Heat Exchanger is designed using advanced technology, this product array is highly suitable for recovery of heat. Beside this, and is obtainable at industry leading prices. Shell & Tube Heat Exchanger is known for its features such as Rugged design, Maintenance free and Hassle free performance.


Fabri-Tek Equipments Pvt Ltd

J-423, MIDC, Bhosari,.

INDIA

+91-20-27130299 / +91-8087752628

Send Enquiry
Shell & Tube Heat Exchangers

Shell & Tube Heat Exchangers are widely used in petrochemical and pharmaceutical industries. The advantages are it has good understanding of the underlying principles of exchanger, it has capability to diagnose for feasibility & viability design, it is provided with corrosion prevention measures and further it has optimum design to evaluate the impact of utility and footprint constraints on the heat exchanger design.


United Heat Transfer Pvt. Ltd.

Plot No. F- 130-131, M.I.D.C, Ambad, Nashik- 422010, Maharashtra.

INDIA

+91-253-2382484 /

Send Enquiry
Shell & Tube Heat Exchangers

Shell & Tube Heat Exchangers are widely used in Fertilizer plants, Chemical and Petrochemical plants, Dairies and defense factories etc. The important features are it is deprived from intermixing fluids and further its construction is done to make the shell & tube sheet materials wield able. It is also provided with Seal / seam welding m/c for high-pressure heat transfer products.


Precision Cooling System

No. 2 - B, Maduvankarai, 1st Street, Off M. K. N. Road, Alandur, Chennai - 600016, Tamil Nadu.

INDIA

+91-8447573586/+(91)-(44)-22343185 / +(91)-(44)-22311587/+(91)-9444254152

Send Enquiry
Shell & Tube Heat Exchangers

Shell & Tube Heat Exchangers are used in the petrochemical, oil & gas, fine and agro chemical, pharmaceutical, nuclear, food industries and water treatment plants. Exchangers can be incorporated into complete packaged systems to reduce on-site installation requirements with significant benefits for both offshore and site shutdown requirements. The shell and tube heat exchangers can be manufactured to a maximum of 3m in diameter, with lengths of up to 38m. Individual components weigh up to 120,000kg, with wall thickness of up to 160mm. It can be designed according to customers particular requirements and manufactured from a choice of suitable materials. These include stainless steels, nickel alloys, duplex, super duplex, 410s clad, INCO 82 clad and alloy 625 clad exchangers.


Charles Thompson Ltd.

Glasshouse Road, Kilnhurst, Mexborough, South Yorkshire, S64 5TD United Kingdom..

UNITED KINGDOM

+44 (0)1709 584 011 /

Send Enquiry
Shell & Tube Type Graphite Heat Exchanger

Shell & Tube Type Graphite Heat Exchanger are available both in vertical as well as horizontal design. They have all advantages and versatility of shell and tube design. A number of baffles can be provided on the service side to achieve high turbulence of the service media. Effectively sealed passes can be provided on the process side to get optimum fluid velocities to achieve better heat transfer coefficients. They are available with 22 mm, 25 mm, 38 mm, and 50 mm. Tube Ids. They are available with heat transfer areas ranging from 2 M2 to 50 M2 and Heat exchangers with higher heat transfer areas can be made on request.


Omega Graphite Equipments

106, Guru Nanak Industrial Estate, L. B. S Road, Bhandup (West), Mumbai 400 078, Maharashtra.

INDIA

+91 22 2566 7505 / +91 222566 7507 / +91 98200 45787 / +91 22 2566 8070

Send Enquiry

Looking to Buy Chemical Equipment? Place Your Request Now!