Chemical process equipment – Buy cooling towers, chillers, heat exchangers, compressors, blenders

Chemical Process Equipment

Simotics DP LP100 Motor

Simotics DP LP100 Motor was specifically designed to address hight thrust vertical pump applications while fulfilling the US Nema standard MG-1. These state-of-the art vertical solid shaft motors have a full cast iron enclosure that cannot corrode, guaranteeing improved reliability, performance and long service life - and low vibration levels. These features make them predestined for harsh environments that can be found in the oil & gas industry, chemical industry, pulp and paper water and wastewater, for instance. The motors set themselves apart as a result of their innovative design, which has also allowed the thrust capability to be increased, within the same design, by up to 175 percent when compared to conventional motors. The motors can be offered in compliance with or even surpass API610 and IEEE841 standards, two of the most stringent standard in the industrial landscape, so that they can provide even higher reliability. Complying with the new Nema Premium efficiency class, their electrical and mechanical design guarantees that losses are limited to 5% below the maximum stipulated by the US efficiency regulation. The motors are available in frame sizes 180LP up to 449LP corresponding to a power range extending from 3 HP up to 250 HP and rated speeds of 1200, 1800 and 3600 RPM, at 60 Hz.


Siemens Industry, Inc.

Siemens Corporation 601 Pennsylvania Avenue N.W. Washington, DC United States.

UNITED STATES

nil /

Send Enquiry
Simplex Filter

Simplex filter is an excellent basket filter and is widely used for various applications in pharmaceuticals, petrochemicals and in chemical factories. Moreover, this filter is corrosion resistant and requires minimal maintenance.


Rak Din Engineers

B- 5, Acharya Niketan, Mayur Vihar, Phase- 1 New Delhi, Delhi, India..

INDIA

+91-11-22790868; +91-11-45122868 / +91-9811108868;+91-9899598868;+91-9873192868

Send Enquiry
Simplex Plunger Dosing Pump

Simplex Plunger Dosing Pump is a reciprocating pump. This pump has a single liquid cylinder which forces liquid out through the top outlet on both the in and the out stroke. They can be single acting or double acting. It is widely used for handling various chemicals with a common motor to facilitate the whole operation. Each head is independently connected and the capacities of each head are also independently adjustable. It can achieve flow rates up to 10000 lts/hr and delivery pressures up to 400Kg/sq.cm. It has steady state metering accuracy of +/-1% of pump output.


SRS Pumps

Chawl No-B, Pitch No-3, Pimpal Galli, NR Hindustan Naka, Charkop, Kandivali (W), Mumbai - 400 067, Maharashtra, India.

INDIA

+91-9769030295 /+91-8080384053 / +91-22-28688422

Send Enquiry
Simplex T-Type Filters

Simplex T-Type Filters extends the range of S type filters to higher pressures, suitable for both liquid and gas applications and available with bolted or quick release type covers.It's flow is from inside to outside the basket to trap and retain debris.


SPX Flow Technology

13515 Ballantyne Corporate Place Charlotte, North Carolina 28277 United States.

UNITED STATES

(704) 752-4400 /

Send Enquiry
Simplex Type Filter

Simplex Type Filter can be specified for drinking water, cooling water, hot water system sea water. Just a few application in the chemical process industry, are Brine, Paint Heat Exchanger, condensers, fuel oil, Organic and Inorganic chemicals. Simplex Type Filter are used to strain foreign matter from pipe line and provide inexpensive protection of costly pumps, meters, valves and similar mechanical equipment.


BVK Fibrotek Engineers Pvt Ltd.

B- 4, Maharani Flats, 1st Floor, No. 16, Kamala Nagar, Porur Chennai, Tamil Nadu, India..

INDIA

+91-44-24767180 / +91-9962636486;+91-9444057761;+91-9444173651

Send Enquiry
Single and Double Wall Aboveground Tanks

Single and Double Wall Aboveground Tanks used for storage of petroleum and chemical products.A variety of interior and exterior coatings offer superior corrosion protection over a wide range of chemical and environmental conditions.


Vestec, Inc.

99 North State Street, Concord, NH 03301-4334, UNITED STATES.

UNITED STATES

603-228-3029 /

Send Enquiry
Single Belt Cooler

Single Belt Cooler is designed for in-line production of food and chemical products in the shape of flakes, pastilles, strips or sheets, all of which can be formed and cooled without additional process requirements. The advantages are it has good operability/accessibility, it has economical operation with low maintenance costs, it provides versatility–produce pastilles, strips, strip granulate, flakes, plates, sheets, etc., it provides variable product thickness, its zoned cooling allows product-specific temperature profiles and further it is non-polluting.The process is simple and performance proven.There is no contact between the coolant and product, so neither is contaminated by the other; the product is not changed in composition and the cooling medium can be re-used without additional, expensive treatment.


Sandvik Asia Pvt Ltd

Mumbai Pune Road, Dapodi, Pune - 411 012, Maharashtra, India.

INDIA

+91 20 27104800 /

Send Enquiry
Single Blade Planetary Mixer

Single Blade Planetary Mixer includes a bowl with a blade that revolves in a planetary motion such that it visits all parts of the vessel. The single blade mixer is ideal for processing light pastes to heavy viscous products. Varied Beater shapes are available to suit product and process applications. Combination of high to low beater speeds helps in particle size reduction further adding to the quality of the mix processed. Low beater speeds are selected for processing of heavy, pasty and dough like masses. Single beater is commonly used for light, medium viscosity products in the pharmaceutical, cosmetic and food industry.


Mikrons Group

35/36, 2nd Floor, Secretrait Colony, Kilpauk, Chennai - 600 010, Tamil Nadu, India.

INDIA

91-44-26427972 / 91-44-26650423 /

Send Enquiry
Single Conveyor Dryer/Cooler (SCF)

Single Conveyor Dryer/Cooler (SCF) is the result of many years of production experience. Whether it is a two foot wide (0.6m) unit drying an expensive pharmaceutical product or a 14 foot 6 inches (4.4m) wide machine producing product at a rate of 100,000 pounds per shift, the components are carefully selected to meet customers production requirements. It has extremely uniform air flow and temperature profiling results in unequalled final product uniformity. Multi-zone temperature control, adjustable airflow volumes and humidity control provides the highest thermal efficiency and gentle drying conditions preventing product degradation. The temperature control systems range from simple on-off indicating controls to the most sophisticated menu driven PLC instruments controlling the dryer and other units in the line.


CPM Wolverine Proctor LLC

3 Langlands Avenue, Kelvin South Business Park, East kilbride G75 0YG, Glasgow, United Kingdom..

UNITED KINGDOM

+44 (0) 1355 575350 /

Send Enquiry
Single Drum Dryers

With applicator rolls, useful for drying high viscosity liquids or pasty materials. Appropriate for potatoes, starches, gelatin, adhesives, and synthetic resins. Rolls create dry product sheets uniform in thickness and density that require minimal dusting.


Buflovak LLC

750 East Ferry Street Buffalo, NY 14211 USA.

UNITED STATES

(800) 332-2419 / (716) 895-2100

Send Enquiry

Looking to Buy Chemical Equipment? Place Your Request Now!