Chemical process equipment – Buy cooling towers, chillers, heat exchangers, compressors, blenders

Chemical Process Equipment

Venturi Scrubber

Venturi Scrubber scrubs steam containing organic substances and ensures the process is very energy efficient. The scrubbers are only supplied as customised solutions for gas flows of 1000 to 125000 m³/h, in single or multi-stage designs. The advantages are the designs are simple and compact, little maintenance is required, they offer high levels of reliability and availability, there is no fire risk in the scrubber and further the investment costs are low.


Koerting Engineering Pvt Ltd

7,8th Street, Dr. Radhakrishnan Salai 600 004, Mylapore, Chennai, Tamil Nadu, India.

INDIA

+91 44 284 75761 / +91 44 284 75762 /

Send Enquiry
Venturi Scrubber

Venturi Scrubber is a gas handling equipment, which utilizes the energy of a high-pressure motive liquid to effectively entrain gas. It is a self-priming, capable of sucking large volume of gas and delivering with slight boost in pressure to few mm of water column. When a high velocity liquid jet spray passes through the venturi throat, it induces a draft action. This ejector draft action draws gas/air from source in to the blower. The sucked gas is entrained in the high velocity liquid spray flow and attains a good velocity at venturi throat. The gas liquid mixer then passes through the venturi-divergent section where in velocity energy is regained as moderate pressure energy. Also in this section of venturi the sprayed motive liquid droplets gets together for subsequent gas liquid separation.


Prime Tech

# 861 A, 2nd floor, J - Block, 15th Street, 13th Main Road, Annanagar West, Chennai - 600 040. INDIA..

INDIA

+91-44-26160866 / +91-9840088220 / +91-9789635755

Send Enquiry
Venturi Scrubbers

Venturi Scrubbers are high performance system which can reduce the contamination level of flue gas up to 99%. They can remove both particulate matter and gaseous pollutant. The flue gas is scrubbed at high speed and pressure at the Venturi and gas velocity is dropped at the Separator. The separator can be converted to spray tower in case the concentration of pollutant is very high. The material of construction of Ventruri is depended on the composition and temperature of the flue gases entering the system. When the flue gases are rich in SOx and NOx then the scrubbing process generates acid and consequently high-grade stainless steel such as SS-316 has to be used. They can be used for any industry where the concentration of particulate matter or gaseous pollutant is high.


Shimi Research Center Private Limited

No. 104, Barodia Tower, D-12, Central Market, Prashant Vihar New Delhi, Delhi, India..

INDIA

+91-11-27566480 / +91-9818512866

Send Enquiry
Ventury Scrubber

Ventury Scrubber is used for the industrial applications. These are extensively used in air, water, vapour, steam, gas, chemical substances, and sludge and slurry applications. With their excellent constructions they have a wet approach ventury which is then followed by a liquid entrainment separator.


P Square Technologies

D - 4, Suryaprakah Apartment, Market Yard Pune, Maharashtra, India..

INDIA

+91-20-26436399 / +91-9970173967;+91-9552536477

Send Enquiry
Ventury Scrubber

Ventury Scrubber is a technology adopted to control air pollution, which are most widely used scrubbers throughout the world. In venturi scrubber, the gas stream enters from the top and passes down the converging section to the throat. With their excellent constructions they have a wet approach ventury which is then followed by a liquid entrainment separator. At the ventury throat, the gas and liquid streams collide and the liquid breaks down into droplets which trap dust particles. Its application area include in chemical industries, fiberglass & composite industries, machining and grinding exhaust etc.


Om Glass Fiber Equipments

Plot No. 5062, G.I.D.C. Post Box No. 104 Ankleshwar 393 002 Gujarat - India.

INDIA

+91-2646-220124 / +91-9824110687 / +91-9824115184

Send Enquiry
VERI Reactor

VERI Reactor series is a glass-lined steel reactor body with a solid glass cover. The combination glass/glass-lined design was developed from the pharmaceutical industry's demand for maximum purity and optimized heat and mass transfer combined with suitability for GMP use. It is specially designed for the two process stages of reaction and distillation. The reaction stage operates under total reflux, allowing the solvent to be distilled off as effectively as possible in the concentration phase. The materials of construction used are borosilicate glass 3.3, 3009 glass-lined steel and PTFE. The specifications are it has volumes from 16 to 100 liters, it has pressures from full vacuum to 9 psig (0.6 bar) and further it has temperatures from -76°F (-60°C) to 400°F (200°C).


De Dietrich Process Systems Co. Ltd

No.102, Mei Yu Road, Wuxi High-Tech Industrial Development Zone, Wuxi, Jiangsu Province, 214028, China.

CHINA

+86 510 6696 7500 /

Send Enquiry
VERSATILE-SD™

The VERSATILE-SD™ is designed as a modular system where the product determines which modules to choose. This spray dryer comes in different standard sizes; 6.3 - 12.5 - 25 – 50 and 80 ranging from 10 to 500 kg/h water evaporation.


GEA Process Engineering A/S

Gladsaxevej 305, P.O.Box 45, 2860 Soeborg, Denmark.

DENMARK

45-39-545454 / nil

Send Enquiry
Vertical Autoclave

Vertical Autoclave is electrically heated by water immersion heaters. Its working Pressure is 1.26 kgf/cm.Sq. and the working temperature is 121 degree centigrade. The features are it is maintenance free, the contact parts are made up of S.S.304/316 quality, the models are available in semi automatic as well as fully automatic and it is further provided with pressure switch, safety valves, low water level switch, vacuum breaker etc.


Hospharma Industries

Unit No. 22, Phase No 2, Madhu Vrinda Indl Estate, Dhuri Industrial Complex - 1, Waliv Phata, Sativali Road, Vasai (East). Thane - 401208.

INDIA

+91-22-28872633 /

Send Enquiry
Vertical Basket Centrifuge

Vertical Basket Centrifuge operates under a discontinuous filtration process and is well suited to the efficient separation of pharmaceutical products and of fine and bulk chemicals. This type of centrifuge is used with small batch sizes and where products are changed frequently with low process costs, this enables versatile usage for processing numerous products with one centrifuge. There is no crystal breakage, as the peeling is performed at the reduced speed. They can handle freely and none freely filtering slurries with equal facility. The centrifuges are built by making it easy to load from the top so that solids can then be extracted with knife or by hand. The equipment has been developed to operate the centrifuge with the exact same filter cake thickness as if it were a production size machine to enable gives a precise scale for each and every process from beginning to end.


Rotofilt Engineers Ltd

Plot No. 102, Phase I, Opp. Torrent Sub Station, GIDC, Vatva, Ahmedabad-382 445 India..

INDIA

+91-79-25899601 / +91-79-25899605 /

Send Enquiry
Vertical Blender

Vertical Blender can be applied in the mixture, reaction, drying and cooling of powder to powder (S-S), powder to liquid (S-L), and liquid to liquid (L-L) in the chemical, medicine, pesticide, dye, petroleum, metallurgy and construction material fields. This series mixer is asymmetrically cantilevered with single helix. The helix will make self-rotation and the screw arm will revolve to complete convection, cutting and diffusing to achieve the purpose of mixing. The features are it has batch capacity of 100 kg to 10,000 kg, it is single screw device and further small amount of liquid can be atomized and sprayed.


IPEC Engineering Pvt Ltd

Plot No. 5175, Near Paras Industries, GIDC., Ankleshwar, Gujarat - 393 002, India.

INDIA

+91 97252 90024 / +(91) 2646 221175 / +(91) 2646 225175

Send Enquiry

Looking to Buy Chemical Equipment? Place Your Request Now!