Chemical process equipment – Buy cooling towers, chillers, heat exchangers, compressors, blenders

Chemical Process Equipment

Flow-Sentry™ In-Line Crushing Device

Flow-Sentry™ In-Line Crushing Device is a fully enclosed crushing device that exercises a single set of rotating blades to impact and shatter at close range any large lumps or chunks of material as they travel through the impact area of the machine.It is ideal for protecting pumps or preventing clogs in pressurized piping systems. The patented design of the Flow-Sentry allows us to offer the machine with most common flange styles, i.e. ANSI or DIN Pipe Flanges, sanitary ferrules.


Atlantic Coast Crushers, Inc.

128 Market Street Kenilworth, NJ 07033.

UNITED STATES

908-259-9292 /

Send Enquiry
Fluid Bed Dryer

Fluid Bed Dryer is manufactured using 304 Stainless Steel. It has 48" Wide x approximate 135" long 2 zone bed. It has approximate 72" long wedge wire section with (2) screen sections, 3 total separations. It is provided with top clamp down cover with lifting mechanism, top end feed, bottom end discharge. It is driven by a M5H vibrating motor, 1.5hp, 3/60/230/460 volt, 1725 rpm. It includes a water coil and further the equipment is mounted on a carbon steel frame.


Phoenix Equipment Corporation

333 Broad Street, Red Bank, NJ 07701 USA.

UNITED STATES

877-736-9320 /

Send Enquiry
Fluid Bed Dryer

Fluid Bed Dryer is most suitable for drying crystalline, granular, coarse & fine material. The wet material is kept in product container, the perforated plate at the bottom works as air distributor & have fine wire mesh which retains the product in the container. The blower mounted on the top of the FBD will create induced draft and air is sucked into the unit which will pass through 5 micron Air Filter 7 will get heated through steam or electrical heating element. This hot air passes through the product is obtained and hence the product moves up & down in the product container which is called fluidsation. Due to this the heat transfer is very quick and product is dried very fast. The mositure from product is carried away by the air through filter bag. Filter bag prevents the particles escaping from the dryer. Its application include in Bulk Drugs, Pharmaceuticals, Chemicals etc.


RG Industries

859/4-A, G.I.D.C. Estate Makarpura, Vadodara - 390010, Gujarat, India.

INDIA

+91-98251 65350 /

Send Enquiry
Fluid Bed Dryer

Fluid Bed Dryer are most suitable for drying granular, crystalline, coarse or similar material in pharmaceuticals, fine chemicals, dyes, food and allied products. In Fluid Bed Dryer, temperature distribution throughout the product is uniform and the heat transfer rate is very high. Due to reduce drying time, high production rates are achieved. It has manually operated air dampers which is provided to control the inlet and outlet air flow and the system can be operated by single operator.


Hallmark Engineers

Dahisar, Mumbai, Maharashtra, India..

INDIA

+91-22-28960147 / +91-9867060255;+91-7498091362

Send Enquiry
Fluid Bed Dryer

Fluid Bed Dryer is widely used for drying powder. The available model is from 5 kg to 500 Kg batch capacity and is available in GMP / STD & LAB model also. It has short drying time & low drying temperature. It is provided with automatic / manual operation & control. It is also provided with electric control panel. It also has pneumatic lifting for product container and has explosion proof design.


Pharma Fab Machineries

Unit No.22, Veena Industrial Estate, L.B.S. Marg, Opp. Punjab & Sind Bank, Vikhroli West, Mumbai - 400083, Maharashtra, India.

INDIA

+91- 9819461354/ +91- 9819461735 / +91-22-25794477 /+91- 9769460522

Send Enquiry
Fluid Bed Dryer

Fluid Bed Dryer find primary usage in industry sectors like food, dyestuff, chemical, pharmaceutical and other process industries. These systems provide for drying materials through fluidization using hot/dehumidified air that creates turbulence in wet product while flowing through it. The important features are the system is supported by complete automation and PLC control and the machine and trolley support provided is in durable SS-316 construction.


Ace Industries

113, Alpine Industrial Estate, Marol Military Road, Andheri East, Mumbai - 400059, Maharashtra,India.

INDIA

+91-22-42258000 / +91-22-29201763 / +91-9322217611

Send Enquiry
Fluid Bed Dryer

Fluid Bed Dryer involves fast drying, cooling and agglomeration of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Chemicals and Biochemical, Food and Dairy Industries. The Fluid Bed Dryer have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet. The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles. The air is heated and the process hot air evaporates the fluid and dries the solids.


Prism Pharma Machinery

Plot No. 3713, Phase-IV, GIDC, Vatva Ahmedabad, Gujarat, India..

INDIA

+91-79-29095204 / +91-9825044789 / +91-9375044789

Send Enquiry
Fluid Bed Dryer

Fluid Bed Dryer is designed to introduce the hot air stream at the base of the product container which is filled with the material. Induced draught is created by means of blower and fresh air is sucked in to the unit. The fresh air is heat by means of electrical heaters or steam or thermic fluid heaters. This hot air stream expands the bed of material at certain velocity & creating turbulance in the product. The product is dried fast without appreciable loss of heat. The Fluid Bed Dryer are most suitable for drying granular, crystalline, coarse or similar material in pharmaceuticals, fine chemicals, dyes, food and allied products.


Chitra Machineries Pvt Ltd

Plot # 202 & 226, Road No.-03, G.I.D.C. , Kathwada At Kathwada, Daskroi, Ahmedabad, Gujarat, India.

INDIA

+91-79-29701726 / +91-79-29292650 /

Send Enquiry
Fluid Bed Dryer

Fluid bed dryers are used in drying powders and granules. The range of fluid bed dryer is widely used in the industries like pharmaceutical dyes, plastic, chemical and food. The important features are it is a versatile process equipment, it has enhanced safety protection and further flame proof models are available.


Everest Engineering & Allied Products Pvt. Ltd.

W-113, Phase-II, M.I.D.C. Industrial Area, Manpada Road, Dombivili (E), Dombivli, Maharashtra, India..

INDIA

91-251-2874831;91-251-2874395;91-251-2871661 / +919867304282

Send Enquiry
Fluid Bed Dryer

Fluid Bed Dryer are normally used for products with a moderate viscosity. The products that can be processed on dryers includes food products, chemicals, yeast, different types of glues, pigments etc. The features includes single piece construction without flange joints, the complete dryer have stainless steel construction with mirror polished product contact surfaces and further it has interlocking between filter bag sealing tube and blower motor and exhaust butterfly valve.


Pragati Engineering Works

Plot No. N-8, Shed No. W-88(A), New Chikhloli, MIDC,.

INDIA

+91-251-2682961 / +91-251-2682961/+91-251-2687407

Send Enquiry

Looking to Buy Chemical Equipment? Place Your Request Now!