Crushers - used in smelting building materials in mining industries, pigment industries

Crushers

Laboratory Roll Crusher

Laboratory Roll Crusher has widely application in the industries of mining, chemical industry, metallurgy etc. The roll crusher can crush materials with middle hardness or less than middle hardness into secondary or fine granularity, such as crushing geological ores, mineral, fire-proof material etc. The fixed part of roller and movable roller are driven by the motor via reducer and v-belt, the raw materials fall into the part between the two rollers from inlet of the machine. The two rollers rotates inward simultaneously. the materials are extruded, crushed and ground, then the end products come out from the bottom of this crusher.


Star Trace Pvt. Ltd.

No. 7, Jeevanandham Street, Red Hills Chennai, Tamil Nadu, India..

INDIA

+91-44-26418456;+91-44-26419439;+91-44-329754 / +91-9380521576;+91-9841015456;+91-9380521567

Send Enquiry
Lancaster Model 24x32 Crusher

Lancaster Model 24x32 Crusher is used to reduce materials of a given product size to a minimum size of 95 percent minus 3/4 inch, 100 percent minus 1 inch, at rates up to 30 tons per hour.It can reduce, in a single pass, material previously requiring primary and secondary crushing.


Kercher Industries

920 Mechanic Street Lebanon, PA 17046.

UNITED STATES

717-273-2111 /

Send Enquiry
Lump Crushers

Lump Crushers is used in the fertilizers, coal processing and chemical industry. This Lump crusher is used to crush soft & semi-hard material that contains small percentage of lumps into uniform material.


Laxmi En-fab Pvt. Limited

No. 25, Nilsin Plot, Near Patel Alloy Steel, Phase I, G. I. D. C., Vatva, Ahmedabad - 380001, Gujarat, India..

INDIA

+91-79-25890134 / +91-9725012749

Send Enquiry
PFW Impact Crusher

PFW Impact Crusher is the newest style impact crusher and has been widely used in many industries, like chemical, metallurgy, road and bridge construction and sand making and so on. The crushers are mostly used as secondary crusher and it well fits for crushing numerous medium and soft mineral & rock materials, such as limestone, feldspar, calcite, talc, barite, clay, kaolin, gypsum, and graphite, etc. The main features are its heavy rotor design and tight test method improve the rotor performance and further its overall type cast steel structure bearing base improves anti load resistance capacity.


GMC Ltd.

No.416 Jianye Road, Shanghai, China.

CHINA

0086-21-58385887 /

Send Enquiry
Pipeline Delumper

Pipeline Delumper is a powerful in-line crusher that chops, destroys, disperses and suspends tough solids in fully enclosed pipe systems.This unit eliminates blockages, works the stream to free flow and prevents damage to pumps and other equipment. It is suitable for wet, dry, pressure or gravity systems.


Roll Crusher

Roll Crusher are widely used in process of brittle and flexible materials in cements, metallurgy, chemical industry, power and coal lines etc. Advantage of Roll Crusher is Reliable, stable and operation, Simple maintenance, long service life, Low running costs, save resources.


Henan Kefan Mining Machinery Co.,Ltd

Xushui Industry Zone, Zhengzhou, China..

INDIA

+86-371-67996718 / +8613838093345

Send Enquiry
Roller Crusher

Roller Crusher consists of a pair of cast manganese steel smooth roller which is mounted on a heavy cast iron base frame. Offered range is widely applicable in different industries for crushing various material to powder. Some well-known features of these crushers are it has easy installation, it has superior finish, it is corrosion resistant, it has dimensional accuracy, it has operational excellence and further it has less maintenance. The device is widely used in Chemical engineering, Ore dressing etc.


Surya Engineering Co.

2, Dr. R. N. Tagore Road, Dunlop & Dakhineshwar Kolkata, West Bengal, India..

INDIA

+91-33-25632032;+91-33-25443898 / +91-9830217654;+91-9830091468

Send Enquiry
Roller Crusher

Roller Crusher is for crushing medium hard product. It is a positive coarse crushing machine for material like ferroalloys, aluminum oxide, calsine, boxide, and fire bricks. It crushes material by passing through two rollers and collected at bottom tray. Nipped material pieces pass between two rollers without slippage. Desire material size and output rate can be achieved by adjusting gap between two rollers. Size reduction ratio is 1-4 per pass. Production rate and energy consumption is affected by changing reduction ratio and differential roller speed. Roll design like smooth, grooved or water cool (for hot material) are offer to suit various requirement.


Tridev Industries

Plot No 40/6, Phase-I, GIDC, Vatva Ahmedabad, Gujarat, India..

INDIA

+91-79-25895865 / +91-79-25897299 / +91-9978917299 / +91-9925597503

Send Enquiry
Rotorshredder (RS)

The crushing tools consist of several rugged impellers that are flexibly attached to a high-speed vertical shaft. They do not require any adjustment or sharpening. As a result, wear-related costs are low. The machine operates in continuous mode and is designed to withstand intensive loads. After reaching the desired size, the material leaves the machine immediately. This eliminates unnecessary consumption of energy. The Rotorshredder can optionally be equipped with a flywheel for energy storage. Rotorshredders are primarily used in the recycling industry for processing all kinds of materials that contain metals, but they can also selectively crush waste paper, wood, commercial waste and other types of waste.


BHS-Sonthofen GmbH

BHS-Sonthofen GmbH An der Eisenschmelze 47 87527 Sonthofen, Germany.

GERMANY

+49 8321 6099-0 /

Send Enquiry
Rotorshredder (RS)

The crushing tools consist of several rugged impellers that are flexibly attached to a high-speed vertical shaft. They do not require any adjustment or sharpening. As a result, wear-related costs are low. The machine operates in continuous mode and is designed to withstand intensive loads. After reaching the desired size, the material leaves the machine immediately. This eliminates unnecessary consumption of energy. The Rotorshredder can optionally be equipped with a flywheel for energy storage. Rotorshredders are primarily used in the recycling industry for processing all kinds of materials that contain metals, but they can also selectively crush waste paper, wood, commercial waste and other types of waste.


BHS-Sonthofen GmbH

BHS-Sonthofen GmbH An der Eisenschmelze 47 87527 Sonthofen, Germany.

GERMANY

+49 8321 6099-0 /

Send Enquiry

Looking to Buy Chemical Equipment? Place Your Request Now!