Chemical Dryers - drying, curing, calcining, tempering, heating quenching, polymerization, solvent reduction

Dryers

Spray Dryer

Spray Dryer is a single stage co-current dryer with rotary or nozzle atomization. Product discharge can be either 1-point with the exhaust air from the cyclone or bag filter collector, or 2-point from chamber base and collector via a conveying / cooling system. It is used where the powder directly meets the quality specification. Co-current as well as counter-current mixed-flow can be obtained.The evaporation rate is the key factor for the required particle size distribution of the product.The particle size requirement affects the choice of atomization and can also affect the size of the dryer. Its capacity ranges from 10 Kgs. to 2000 Kgs. per hour.


Powerpac Engineers

Plot No. 156/15, Kailashnagar Estate, 'F' Road, Opp. New Tele. Exchange, Phase - I, G.I.D.C., Vatva - 382 445, Ahmedabad, Gujarat, India..

INDIA

+91-79-25830758 / +91-9825940215

Send Enquiry
Spray Dryer

Spray Dryer are extensively used for drying as well as particle formation. These dryers are used to convert the suspensions, solutions and slurries in dry powder. The products are manufactured using special designed as well as standardized method and used in various industries including Food, Pharmaceuticals, Chemical, Ceramics and Detergents. Used for products drying duty, these dryers have different flow patterns as well as atomization. In addition, the dryers are available for rotary disc atomizer system, two fluid nozzle system and pressure nozzle system. With fire fighting nozzles and explosion vents, these spray dryers provide inert environment drying.


Excel Plants & Equipment Private Limited

Gat No. 611, Mouje - Kuruli, Chakan MIDC, Tal. Khed Pune, Maharashtra,India.

INDIA

+(91)-9145524545 ; +(91)-9145524901 / +(91)-(2135)-679703 ;+(91)-(2135)- 679707

Send Enquiry
Spray Dryer

Spray drying is the transformation of feed from a fluid state into a dried form by spraying the feed into a hot drying medium. The feed is pumped from the product feed tank to the atomizing device. There are two types of atomizing device Nozzle atomizer and Disc atomizer. The atomizing device located in the air disperser at the top of the drying chamber. The drying air is drawn from the atmosphere via a filter by a supply fan and is passed through the air heater to the air disperser. The atomized droplets meet the hot air and the evaporation takes place, while cooling of the air happen simultaneously. In Spray Drier, after the spray is dried in the drying chamber, the majority of the dried product falls to the bottom of the chamber and enters to a pneumatic conveying and cooling system. The fines, which are the particles with a small diameter, will remain in the air, and it is therefore necessary to pass the air through cyclones to separate the fines. The instrumentation comprises indication of the temperature of the inlet and outlet air, as well as automatic control of the inlet temperature by altering the steam pressure, amount of oil or gas to the air heater, and automatic control of the outlet temperature by altering the amount of feed pumped to the atomizing device. It has Control of particle size. Spray dryers can typically produce between 30 to 500 micron average particle sizes, in a bell shaped distribution


NSI Equipments Private Limited

Opposite Block Development Office, Delhi Road, Meerut, Uttar Pradesh - 250 002,India.

INDIA

+91-121-2519225 / +91-9897700681 / +91-121-2529956

Send Enquiry
Spray Dryer

Spray Dryer used for drying substances in food processing, chemicals and dairy industries. We employ stringent parameters of quality control for making our product range.


New Era Dairy Engineers (I) Pvt Ltd.

B - 68, Sector - 64 Noida, Uttar Pradesh, India..

INDIA

+91-120-4549160;+91-120-4549161 / +91-9810396782

Send Enquiry
Spray Dryer

Spray Dryers are used in foods, chemicals, ceramic and pharmaceutical sectors. Spray drying is a method of producing a dry powder from a liquid or slurry by rapidly drying with a hot air. The pump-able feed is pumped to a nozzle or atomizer. The atomizer or nozzle atomizes the pumped feed. At the same time hot air is passed through air distributor into drying chamber. This hot air comes in contact with the atomized feed particles and removes moisture. The dry powder drops down at chamber cone at bottom and collected. Air leaves the drying chamber and is passed through cyclone and or bag filter / wet scrubber. Alternatively powder can be collected at the outlet of cyclone separator.


Quasar Process Equipment

15 Parijat Snehnagar, 2163 Sadashiv peth,Near Neelayyam Talkies pune 411030..

INDIA

+91-8600016223 / +91-9763568740 /

Send Enquiry
Spray Dryer

Spray Dryers are used for efficient drying of inorganics, catalysts, ceramics, powdered metals, pigments, dyes and similar materials. The maximum air temperature is 530 Degree Celsius when using a direct-fired gas heater. Evaporation capacity varies depending on the inlet /outlet air temperature profile and composition of the feed. The advantages are it provides continuous automatic processing, it has one step processing, it provides uniform free-flowing product, it has operating flexibility and further has lower maintenance cost. It is widely used for applications in Fluid Cracking Catalyst, Micro-Crystalline Powders, Magnesium Chloride etc.


Kilburin Engineering Limited

Plot No. 6, MIDC - Saravali, Kalyan Bhiwandi Road, Taluka Bhiwandi District Thane, Maharashtra, India..

INDIA

+91-2522 663 800 / +91-2522 662 200 /

Send Enquiry
Spray Dryers

Spray Dryers is most widely used process in chemical, minerals, pharmaceuticals, food, Dyestuff industries for converting liquid solutions / suspensions / slurry / emulsions into either powder, granules or agglomerates. Advantages of spray dryers are consistent product quality, with better control on product parameters like product moisture, bulk density, particle size, dispersion, flow ability, etc.


Rishikesh Exports

10, ‘Sital’, Saraswati English School Road, Panchpakhadi, Thane (W), Maharashtra, India..

INDIA

91- 22 25369069;91- 22 25407497 /

Send Enquiry
Spray Dryers

Spray drying plant comprises of a large cylindrical & vertical chamber in which large volumes of hot air is gushed continuously. This hot air supplies the required heat needed for the evaporation of liquids, which then dries the small droplets of raw materials.


Shachi Engineering Pvt. Limited

7, Brilliant Chambers, 84, Mayur Colony, Kothrud, Pune - 411038, MS India.

INDIA

+91-20-25433786 / +91-20 25469849

Send Enquiry
Spray Dryers

Anhydro spray dryers can be used for a wide range of applications. The spray drying process is a continuous operation in which almost any pumpable liquid can be converted into a free flowing powder.


SPX Flow Technology Danmark A/S

Oestmarken 7 DK-2860 Soeborg Denmark.

DENMARK

+45 70 278 222 /

Send Enquiry
Spray Dryers

Spray Dryers is a method of producing a dry powder from a liquid or slurry by rapidly drying with a hot gas. This is the preferred method of drying of many thermally sensitive materials such as foods and pharmaceuticals. A consistent particle size distribution is a reason for spray drying some industrial products such as catalysts.


Saka Engineering Systems Private Limited

396/ 8, Santosh Park, Kundan Nagar, Mumbai Pune Highway, Dapodi,Pune, Maharashtra - 411 012, India.

INDIA

+(91)-9923832858 /

Send Enquiry

Looking to Buy Chemical Equipment? Place Your Request Now!