Chemical Dryers - drying, curing, calcining, tempering, heating quenching, polymerization, solvent reduction

Dryers

Fluid Bed Dryer

Fluid Bed Dryer with latest improvement in design makes this unit a truly versatile one for pharmaceutical, food, dyestuff, chemical and polymer industries. All contact parts are made of S.S.304/316 and are provided with isolated control panel. Due to induced draft created by specially designed heavy duty fan the atmospheric air is drawn through the 5-micron air filter. The filtered air is then heated to the required temperature by electric heaters / steam radiator. The hot air passes through the product container and through the product which as a result gets dried by air fluidization.


Amulya Industries

209, 2nd floor, Bhavani Estate, Jain Mandir Road, Opp IIT Gate-2, Powai, Mumbai-400076, Maharashtra, India.

INDIA

+91-8898811811 / +91-22-257 80800 /

Send Enquiry
Fluid Bed Dryer

Fluid Bed Dryer provides uniform drying at low temperature. In this dryer, wet material is fed in its shaking perforated steel bed through which the drying air flows. As the material passes along the dryer it gradually loses moisture until due to the hot air and the target dryness is achieved. After that it reaches to point where the material has to pass through a cooling zone. Its intrinsically safe earthing system ensures complete elimination of static charge. Its applications include in chemical industry, pharmaceuticals and biochemicals industry etc.


Paan Pharmatech Engineers Private Limited

Plot No. 36, Shramsafalya Mhada Bunglow RSC-11, Veer Savarkar Nagar, Thane - 400606, Maharashtra, India.

INDIA

+91-9820103114 / +91-9167122709 / +91-22-25833895

Send Enquiry
Fluid Bed Dryer

Fluid Bed Dryers are designed to operate in open cycle (involving water evaporation) or closed cycle (involving mostly organic solvent evaporation). For products posing a risk of dust explosion during processing, pressure shock resistant designs, self-energized and closed cycle systems are available. The fluid bed drying technique is ideal for the rapid, even drying of chemical, pharmaceutical and food product. The material may be in granular, powder or crystalline form. Normally initial moisture content up to 20% is ideal but materials with higher initial moisture content can be dried successfully.


Newtech Equipments

B-26, Gurudev Apartments, R.C. Marg, Opposite MTNL, Chembur Naka, Chembur, Mumbai- 400 071, Maharashtra, India..

INDIA

+91 22 2529 3319 / +91 98198 77954 / +91-98203 84255

Send Enquiry
Fluid Bed Dryer

Fluid Bed Dryer is most suitable for pharma equipment and can be used in chemical, food, dyestuff, and polymer industries for fast and efficient drying. All contact parts are made out of stainless steel 304 / S.S. 316 quality and control panel is provided with the machine. It is provided with fully automatic control panel box with process timer, pneumatic finger bag shaking, pneumatic lifting of container, digital temperature controller cum indicator, voltmeter, ammeter, earthing system etc. Selection of capacity of fluid bed dryer depends upon bulk density, drying temperature and moisture contents of wet material to be dried. Pharmaceutical granules with 20-25% moisture can be dried in 30-45 minutes at 80 C approximately.


Technic Pharma

B/ 25. 8, Adke Compound, Surya Nagar, Opp. Western Paper Mill, LBS Marg, Vikhroli (W),.

INDIA

+91-22-5793362 /

Send Enquiry
Fluid Bed Dryer

Fluid Bed Dryers are ideal for air fluidization for drying granules, crystalline, coarse or similar materials in pharmaceuticals, fine chemicals, dyes, food & allied industries. The structure of fluidization bed is of round so as to avoid dead corner. Inside the hopper there is a stirring device in order to avoid agglomeration of raw material and forming canal of flow. The granule is discharged through the method of turning over. It is very convenient and full. The discharged system can be designed as request too. It is operated at conditions of negative pressure and seal. The air is filtered. Therefore it is simple in operation and convenient for cleaning. It is an ideal equipment that is in conformity with the requirements of GMP. The drying speed is fast and the temperature is uniform. The drying time is 20-30 minutes normally.


PRS Technology

Plot No. 4107, Opp. Navbharat Packaging, Near Crystal Chowkdi, GIDC., Ankleshwar - 393 002, Gujarat, India.

INDIA

+91-9408293194 /

Send Enquiry
Fluid Bed Dryer

Fluid Bed Dryer utilizes the principle of passing the hot air a high velocity through the bed of the material to be dried. thus causing it to fluidize. The blower situated on the exhaust side of the drye on negative pressure principle, which creates the incuced draught and sucks in the fresh air into the dryer. A steam of hot filtered air is introduced from the bottom of product container containing the wet material. This container is provide with the air distribution plate and a dutch sieve. The air stream is passed through the bed of the material and fluidizes the product particles by creating the turbulence in the product container. Due to fluidization each particle gets surrounded by hot air, which leads to quick & uniform heating and drying Filter bags provide at the top prevent escaping of particles from the machine.


Mega Machinery

Plot No. A1-5301, GIDC, Near J.P. Industry, Ankleshwar - 393002, Gujarat.

INDIA

+91-98241 01133 /+91-2646-222777 /

Send Enquiry
Fluid Bed Dryer

Fluid Bed Dryers are most suitable for drying granular, crystalline, coarse or similar material. It is also possible to dry very fine crystals or very coarse material. The air is passed from the bottom of the container which has got perforations of S.S. fine wire-mesh. Hot air passes through the product container and therefore the turbulence in the product is obtained and hence the product moves up and down in the product container. Due to this the heat transfer is very quick and the product is dried very faster without appreciable loss of heat. The fluid bed Dryer will be complete with 2800 R.P.M., TEFC Motor, control panel with timer, 2 no. temperature gauge, filter bag, SS container with trolley & heater or steam radiator.


Shanta Flaker & Dryer Company Pvt Ltd

Plot No.114, New Chikhloli, MIDC, Ambarnath (W),.

INDIA

+91-251-2682961/+91-251-2687407 /

Send Enquiry
Fluid Bed Dryer

Fluid Bed Dryer is deal for the rapid, even drying of chemical, pharmaceutical and food products. The material may be in granules, power or crystalline form. Normally an initial moisture content upto 20% is ideal but materials with higher initial moisture content can be dried successfully.


Avon Pharma Machines Pvt. Ltd.

Unit No. 10, Mona Industrial Estate No.-2, Behind Tirupati Udyog Nagar, Sativali Road,Vasai (East), Dist : Thane..

INDIA

+91 - 250 - 2450638 / +91 - 250 - 2450639

Send Enquiry
Fluid Bed Dryer

Fluid Bed Dryer find application for drying powders, granular crystalline, coarse or similar material in pharmaceuticals, fine chemicals, dyes, food and allied products. In Fluid Bed Dryers, the product to be dried is fluidized by passing hot air through it. The process achieves fast heat transfer making it very efficient, yet gentle on the product, giving rapid drying of pharmaceutical/ fine chemical powders and particles. These Fluid Bed Dryers are of high quality and efficiency, in compliance with cGMP norms, built in stainless steel construction of 316 / 316L grade contact parts.


Shiv Shakti Process Equipment Pvt. Ltd.

Shiv Shakti, 407, Shivam Chambers, Next to Sahara, S.V. Road, Goregoan (W), Mumbai 400 062, India.

INDIA

+91-22 2678 8480 / +91-22 2679 8554 / +91-9821 633 589

Send Enquiry
Fluid Bed Dryer

Fluid Bed Dryer ranges from 1 to 1500 liters featuring through the wall design and movable head, allowing operation with platform and dust-free discharging via a linked mill directly into an IBC. It can be stand-alone or linked to a high shear mixer for granulation or a extrusion and spheronization system to form an integrated system. The features are it has distribution plate available in plain uniform perforations, it has perfect cGMP-design, it has flexibility (processes and products) for wet granulation and further has different up plate and down plate configurations for fluid bed coating applications.


Umang Pharma Tech Pvt. Ltd.

Survey No. 146, H. No. 1 (PT),Vasai Phata Highway Junction, Pelhar,NH8, Vasai (E) - 401 208, Maharashtra (India)..

INDIA

0250- 6681600-10 / marketing@umangpharmatech.com

Send Enquiry
1...678910...22

Looking to Buy Chemical Equipment? Place Your Request Now!