Industrial MRO Equipments – Buy automotive, actuators, centrifugal pumps, abrasives, controllers

MRO Equipment

Chemical Process Centrifugal Pumps

Chemical Process Centrifugal Pumps are used for pumping of Corrosive & Abrasive Chemicals, Hydrocarbons, Volatile liquids in Chemicals, Petrochemicals, Pharmaceuticals and Process Industries. Centrifugal Pumps are Horizontal, Single Stage, Volute Casing Pumps, with end suction, Top centerline discharge design. Back-pullout design enables to remove the rotor assembly without disturbing the pipe lines. If a spacer coupling is used it is also unnecessary to disconnect the motor. The feet at bottom transfer residual pipe stress by the shortest possible route the base plate & foundation.

Dev Engineers

A-47, Maruti Industrial Estate, Vijay Mill Compound, Opp. Naroda Fire Station, Naroda Road, Ahmedabad - 380 025, Gujarat.


+91-79-65495676 /+91-79-26403839 / +91-98240-12742

Send Enquiry
Chemical Process Pumps

Chemical process pumps which are widely used in chemical industries carries the following features. It consists of more than 3mm corrosion allowance (cast iron) for extended use on corrosive applications. Its back-pull-out construction allows rotating assembly to be with drawn without disturbing the suction and delivery connections. It has heavy-duty, stiff solid shaft design with low L3/D4 ratio which ensures less than 0.05mm shaft deflection at the seal face in all operating condition. This extends the seal life of the pumps.

Creative Engineers

1st Floor, Above Bhairavnath Post Office, Opposite Pragati Society, Maninagar Ahmedabad..


08447574128 / +(91)-8140179903

Send Enquiry
Chemical Process Pumps-NZ Series

Chemical Process Pumps-NZ Series provides the most economical, combinatorial design which simplifies maintenance, reduces inventory, is able to give a near constant head for a wide flow range. NZ pumps are injection moulded, horizontal, side discharge, back pull-out, volute casing type, single stage, end suction centrifugal pumps. NZ Series pumps are specifically designed to provide optimum pumping solutions with reduced life cycle cost for all chemical applications. The specifications are it has head upto 50 meters, it has flow upto 50 m3/hr and further the material of construction is GFR-PP, PP, PVDF.

Soltech Pumps & Equipment Pvt. Ltd.

105-107, 1st Floor, Pooja Complex, 22, Veer Savarkar Block Shakarpur, Vikas Marg, Metro Pillar No. 59, New Delhi - 110092, Delhi, India.


+91-11-42444289 / +91-11-22466826 / +91-9310156040

Send Enquiry
Chemical Processing Pumps

Chemical Processing Pumps are fabricated using the finest materials comprising Teflon, PP, UHMWPE, SS, etc. with FRP coating as well, if required. The Chemical Processing Pumps are designed to handle aggressive media consisting slurries. Further these pumps are made with the option to resist high temperature media.

RKS Engineering Co.

5-2-32 to 34, Hyderbasthi, R. P. Road, Secunderabad, Andhra Pradesh, India..


+91-40-66334463 / +91-9246523317;+91-8885523317

Send Enquiry

Chemical Pumps are centrifugal semi open impeller type pumps using less floor space. The important specifications are it has non clogging tendency, it handles light slurries, it has grease/oil lubricated bearings, it is provided with dynamically balanced impeller, it has less noise and no vibrations. Its capacity is up to 80 M3/Hr and its speed is 1440/2880 rpm at 50 Hz & 1750/3500 rpm at 60 Hz. Its application area includes Organic/Inorganic Chemicals, Pharmaceuticals, Fertilizers, Ceramics, Food Industries etc.


18,Shukram Chamber, OPP.Narayan Nagar, Khodiyar Nagar,Bapunagar, Ahmedabad..


+91-79-22705444 /

Send Enquiry
Chemical Transfer Cart

Chemical Transfer Carts are widely used to transfer chemicals from one place to another. The transfer carts are provided with 24 Bottle Load capacity and the number of shelves is 2 and its caster size is 2 In. Further the swivel capacity per shelf is 50 lb. Its packaged dimensions are as follows. Its length is 105.00 cm, height is 110.00 cm and width is 54.00 cm.


1 Rudolf Place, London..


+44 207 793 3838 /

Send Enquiry
Chemical Transport Cart

Chemical Transport Cart are designed to transport harsh chemicals throughout entire facility. This unit has a side door loading design for easy removal of harsh chemicals. The important features of these transfer cart are it is provided with stainless steel construction, it has clean room approved casters, it is provided with ergonomic designs and further it has locking brake.

G2 Automated Technologies, LLC

10500 Metric Dr, Dallas, TX 75243, United States.


+(972) 479-0699 / +1-866-642-2832

Send Enquiry
Chemically Resistant Diaphragm Pumps

Chemically resistant diaphragm pump are fully suited to applications where aggressive solvents and acid vapors are present. The diaphragms and other wetted parts are made from compounds of PTFE, PP and PVDF. The pumping and connection heads are carbon fiber reinforced with a small electrical conductivity. This prevents electrostatic loading and minimizes the danger of igniting gas mixtures in the pump by electrostatic discharge. These chemically resistant, single-stage diaphragm pumps are oil-free and have a wide range of applications between atmospheric pressure and 75 mbar. Each has a compact design, low noise level and simple construction for low cost operation.

Terra Universal

800 S. Raymond Avenue, Fullerton, CA 92831, USA.


+1-714-578-6000 /

Send Enquiry
Chemistry diaphragm pumps

Chemistry diaphragm pumps include evacuating chemically aggressive gases and vapors from such equipment as rotary evaporators, vacuum drying cabinets and centrifugal concentrators. Chemistry diaphragm pumps feature uncompromising chemistry designs. Their construction with fluoropolymers makes them very resistant to chemical vapors from inlet to exhaust and very tolerant to condensates. Pumping chambers are hermetically separated from the drive system ensuring long lifetimes of mechanical parts. Most importantly, diaphragm pumps are oil-free, for vastly reduced service demands compared with oil-sealed pumps. They eliminate the cost of water and its contamination well-known from water-jet aspirators, and the waste-oil disposal of rotary vane pumps.


11 Bokum Road Essex, CT..


+1 860 767 5341 /

Send Enquiry
Chlorine Measuring Cells

For the disinfection of any type of wasted water, preference is given to chlorine gas or chlorine compounds. In order to monitor the disinfection process, a measuring cell has been developed which is working according to the principle of depolarization of a galvanic element.

Lutz - JESCO America Corp.

55 Bermar Park, Rochester, New York 14624, USA.


585-426-0990 / 800-554-2762

Send Enquiry

Looking to Buy Chemical Equipment? Place Your Request Now!