Industrial MRO Equipments – Buy automotive, actuators, centrifugal pumps, abrasives, controllers

MRO Equipment

Horizontal Polypropylene Centrifugal Pump

Horizontal Polypropylene Centrifugal Pumps are provided with injection wetted and design and further all parts come into contact with liquid are of non-metallic construction. The material of construction is specially selected depending on the specific application. Polypropylene for clear fluids are upto 80 Temp. Glass Filled Polypropylene (GFP) having good resistence to corrosion is used for fluids having suspended parities and can handle Acids, Alkalies, Effluents, Fluids containing suspended particles slurry etc.

Roto Dynamic

362-C, Dr.Nanjappa Road, Coimbatore-641 108, India.


+91-422-2232189 / +91-9843018058

Send Enquiry
Hose Pumps

The Hose pump AMP Series are used mainly in Chemical applications such as transfer, metering and batching. Its important features are it is sealless, close coupled, abrasion resistant and economical in nature. Further it is provide with self-priming to 27 ft., it has reversible rotation and its metering accuracy ±1%. Electronic equipment is used for metering and batching operations.

Pulsafeeder, Inc.

2883 Brighton-Henrietta Townline Road, Rochester, NY..


+(800)860-2983 /

Send Enquiry
Hot Melt Gear Pump

Hot melt pump is mainly used for transportation, pressurization and metering of high temperature or high viscosity polymer melt. Hot melt pump is configured with frequency motor, reducer and control system so as to vary the speed, make higher consistency in die pressure, thus improve the quality and quantity of extruded products.

Zhengzhou Batte Melt Pump Co., Ltd.

No.22 Dongqing Str., High & NewTechnology Development Zone, Zhengzhou, China..


86-371-67991755 /

Send Enquiry
HP 100 Double Acting Piston Manual Pump

HP 100 Double Acting Piston Manual Pump is a dual action horizontal piston hand pump. It is designed to manually pump solvents, chemicals, petroleum products and other liquids with ease. It is ideal for high volume liquid transfer in areas where electric or pneumatic power is not available. The flow rate is up to 90 litres/min.

Mandar Pumps & Engineering Co.

Unit No.127, Devendra Co-op. Indl. Premises, Lokmanya Nagar - 2, Thane (W) 400-606, India.


91-22-25881651 / 91-22-22963171 / +91-98210 23351

Send Enquiry
HSS Drill Bits

HSS Drill Bits are available in standard series and also stub series and long series in parallel shank and taper shank as per the specific requirement of the customers. HSS Drill Bits can used in chemical,pharmaceutical,paint industries.

Shreeji Trading Company

No. 57, Chakla Street, 3rd Floor, Masjid Bunder, Mumbai -400003, Maharashtra, India..


+(91)-9323507372 /+(91)-9819768890 /

Send Enquiry

HTM PP/PVDF Pumps are magnetic drive centrifugal pumps made of thermoplastic materials (Polypropylene and PVDF) suitable to transfer acids and corrosive liquids. These pumps have been designed with a sealless design where the pump is closed coupled to the motor and the motion occurs through magnetic joints. The external magnet, in fact, is mounted on the drive shaft and it transmits the motion from the motor to the internal magnet connected to the pump impeller which rotates and moves the fluid through the pump. It is the magnetic attraction between the external magnet and the internal magnet which allows the full torque of the motor to be passed to the impeller. The two magnets are separated by a rear casing that creates a hermetic containment of the liquid which has no access to the outside, thereby preventing any leakage of fluid or other fugitive dangerous emissions.

Armek Srl

Via Volta 85/a 20816, Ceriano Laghetto (MB) ITALY.


+39 02 96460406 /

Send Enquiry
Hydraulic Actuator

Hydraulic Actuators are designed for "on-off" or modulating control of any quarter-turn ball, butterfly, rotary plug or damper style valve applications. Its important specifications are it has supply pressure up to 2,250 psig, its standard temperature rating is -20°F to 210°F and its angular rotation is 90 degrees ±8 degrees. Its important features are its high pressure construction eliminates undesirable regulators and relief valves for supply pressures and further its hydraulic dampening provides smooth “open-close” operation to prevent detrimental valve slamming. Its application area includes Chemical, Pharmaceutical industries.


5500 Wayzata Boulevard, Suite 800, Minneapolis..


+1-763-545-1730 /

Send Enquiry
Hydraulic Cylinders & Power packs

Hydraulic Cylinders & Power packs are used in various industries like chemical, cement, steel, automobile, glass, power, heavy engineering and construction. Hydraulic cylinders & power packs ensure flawless functioning and require very low maintenance, hence greatly reducing the maintenance cost. These industrial hydraulic power packs are available in different sizes and specifications as per the requirements. Its important specifications are its stroke is 300 mm, diameter of cylinder is 70 mm and that of piston rod is 32 mm.

Oriental Engineering Works Pvt. Ltd.

Industrial Area, Yamunanagar, Haryana..


+918447530543/+(91)-(1732)-251751 / +(91)-(1732)-251750

Send Enquiry
Hydraulic Drum Lifter

Hydraulic Drum Lifter is available in different specifications and dimensions according to the clients needs. For this high quality raw material and advanced techniques are used for the manufacture of these products. These drum lifters are used in various industries like auto mobile industry, engineering industry, chemicals industry and other industries. Its important features are its capacity is up to 300 Kgs and it Lift Height is 1400 mm and Tilt Height is 1550 mm.

Power Tek

59 A, Arasamara, Street No. 1, Avarampalayam, Coimbatore, Tamil Nadu..


+918376806289/+(91)-9842224522 /

Send Enquiry
Hydraulic Power Units

Hydraulic power units is made by utilizing high grade raw material, sourced from reliable vendors of the market. Along with this, the offered range is known for its usage in different tasks such as drilling, turning and slotting machines. For the purpose of chuck clamping and turret movement, the offered range is applicable in turning machines. Its application areas include Coal, Petroleum and Metallurgy industries. Its important specifications are its working pressure is 20 MPA, Oil tank is 60 L and Power is 3.0 KW.

Apex Hydraulics Private Limited

No. 2 C- 15, S.P. 3rd Main Road, Ambattur Industrial Estate, Chennai, Tamil Nadu..


+918373904712/+(91)-(44)-26250593 / +(91)-(44)-26244670

Send Enquiry

Looking to Buy Chemical Equipment? Place Your Request Now!