Industrial MRO Equipments – Buy automotive, actuators, centrifugal pumps, abrasives, controllers

MRO Equipment

SS Centrifugal Pump

SS Centrifugal Pumps are extensively used in various engineering, fluid based and other industries for transporting of water, chemicals etc. Fabricated using high grade stainless steel, these pumps are acknowledged for high durability and flexibility. Innovatively designed, these pumps ensure trouble free performance and energy efficiency. These pumps are stainless steel centrifugal mono bloc and bare pumps(coupled). These pumps are made from SS-304 or SS-316 sheet. These pumps wetted parts are of stainless steel and widely used in chemical and process industries.


Ved Engineering

B-38, Sector-60, Noida - 201301, Uttar Pradesh, India.

INDIA

+91-120-2580507 / +91-120-2584659 / +91-9971934240 / +91-9350545986

Send Enquiry
chemical check valve

Chemical check valve having good quality,it is size is 1/2"-4" and these Nomiat Pressure is 1.6Mpa.


Yuhuan Jida Brass Co., Ltd.

Pengzai Industrial Area,Chumen,Yuhuan,Zhejiang,China..

CHINA

86-576-87417598 /

Send Enquiry
Forged Steel Check Valve

Forged Steel Check Valve is manufactured with international quality standards and the offered range is made using best quality material and high end technologies. A number of construction, engineering, chemical and other industries make use of the dual plate waffers offered. The features are it has tough design, it is abrasion resistant and further it has fine edges.


Sanco Valves Private Limited

Manoshi Complex, Office No. 30, Sector 3 Opposite Ghansoli Railway Station, Ghansoli Navi Mumbai- 400701, Maharashtra, India.

INDIA

+91-9324175567 / +91-7666067772 /

Send Enquiry
Forged Steel Lift Check Valve

Forged Steel Lift Check Valves are widely used in industrial chemical piping, oil, gas, petrochemical plant etc. The features are it has horizontal piston type integral hard face seat design, it has compact sturdy design for high-pressure temperature service, its stellite 6 hard face disc / plug ensure low friction and long service life and further its leakproof stronger body and bonnet joint fully encased with spiral wound gasket. Its manufacturing standard is according to BS 5352 and it have size range from 1/2" ~ 2" (DN 15mm to 50mm).


Hyper Valves

R-2 & R-3, Arbuda Estate, Near Muthia Railway Crossing G.I.D.C., Phase-2 Naroda, Ahmedabd-382330.

INDIA

+91-79-22812065 / +91-9825047442

Send Enquiry
Cast Steel Swing Check Valve

Cast Steel Swing Check Valve is widely used in industrial chemical piping, oil, gas, petrochemical plant etc. The design offers a low-pressure drop operation, which makes the valve more energy efficient. The features are it is provided with bolted cover, it has swing type disc, it has ground & lapped seating surface, it is suitable for the horizontal & vertical pipe runs and the valves are available in both flange end & butt weld ends. Its size range is from NPS 1" ~ 12" (DN 25mm to 300mm) and the manufacturing standard is according to BS 1868.


Hyper Valves

R-2 & R-3, Arbuda Estate, Near Muthia Railway Crossing G.I.D.C., Phase-2 Naroda, Ahmedabd-382330.

INDIA

+91-79-22812065 / +91-9825047442

Send Enquiry
Disc Check Valve

Disc Check Valves are widely demanded by the chemical industries, sewage treatment and irrigation systems besides power plants for idyllic flow regulation of the industrial fluids. These offer rapid opening & shutting. These are dimensionally precise and very compact hence easy to install and do not consume large space. These are also easy to operate and need least maintenance. Further the valves have good endurance and are very affordable.


Beena Engineering Works

1, Ajmeri Udyog Estate, Dhobighat, O/s. Shahpur Gate, Behind Municipal Quaters, Ahmedabad - 380004, Gujarat, India..

INDIA

+91-79-25625382 / +91-79-25627177 / +91-9824395182 / +91-94273161371

Send Enquiry
Forged Check Valve

Forged Check Valves are suitable for variety of industrial segments like paper, sugar industries, chemical processes, textile industries etc. The valves are highly acknowledged and well appreciated for its consistency and excellent performance. The features are it is highly durable and compact in size, it is available at most suitable prices and further it is tested across various quality parameters. Its size is from 15 mm to 50 mm.


G M Engineering Pvt. Ltd.

Plot No: 2632 G.I.D.C., Lodhika Metoda - 360 021 (Rajkot). Gujarat, India..

INDIA

+91-2827-287658 / +91-9227655581 / +91-9228005559 / +91-9228005558

Send Enquiry
Lined Ball Check Valve

Lined Ball Check Valve is extensively used for regulating the flow of gases or liquids in any industrial system. The product is available in different sizes and dimensions. The features are it is easy to open and shut- off, it has high durability and further has compact design. They are broadly applicable in Pharmaceuticals, Waste Processing, Food Processing, Water Treatment, Chemicals, Leaching Acid, and other industries.


Super Industrial Lining Pvt Ltd

Block No.: 1401/A & 1401/B, Luna Patiya, B/H Elysium Pharma Mahali Talav, Village Dabhasa, Tal. Padra,.

INDIA

+91-2662-222036 / +91-2662-222037

Send Enquiry
Dual Plate Check Valve

Dual Plate Check Valves are automatic in operation and designed to prevent reversal of flow in fluid piping systems. These valves are maintained open by the flow of fluid in the straight direction and are closed by the back pressure of the fluid. The valve can be fitted with external weights to allow the faster closure to reduce water hammer or shock pressure on flow reversal. This valve is suitable for low-velocity applications with infrequent velocity reversals. Its size range is from NPS 2" ~ 24" (DN 50mm to 600mm) and the manufacturing standard is according to API 594. It is widely used in industrial chemical piping, oil, gas, petrochemical plant etc.


Hyper Valves

R-2 & R-3, Arbuda Estate, Near Muthia Railway Crossing G.I.D.C., Phase-2 Naroda, Ahmedabd-382330.

INDIA

+91-79-22812065 / +91-9825047442

Send Enquiry
Dual Plate Check Valve

Dual Plate Check Valves are light in weight thus has easier handling and self supporting. It has compact & structurally sound design. It can be installed horizontally or vertically. The Dual Plate Check Valves is the most versatile design available in specific materials of construction to suit particular pressure, temperature and fluid flow characteristics. Some of the typical applications include in Hydrocarbons, Oil & Gas, Metallurgical & Chemical processes etc. It can handle all gases like chlorine, hydrogen, nitrogen, carbon dioxide (CO2) etc.


Regent Hitech Private Limited

A-6, Sector - 59, Noida-201 301, Uttar Pradesh (India).

INDIA

+91-120-2954178 / +91-9811033567 / +91-9811006911

Send Enquiry

Looking to Buy Chemical Equipment? Place Your Request Now!

www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X