Industrial MRO Equipments – Buy automotive, actuators, centrifugal pumps, abrasives, controllers

MRO Equipment

Capacitance Level Transmitter

Capacitance Level Transmitter is used in sensing level of liquids. It can be used for conductive as well as nonconductive liquids. It is offered with PTFE sleeve for better insulation & to withstand high temperature in conductive tanks the insulated probe acts as one electrode & the tank wall as another electrode, any change in liquid level the dielectric value will change thereby changing the capacitance value proportional to the liquid level. In case of nonconductive tanks, a reference probe is provided as ground electrode. The output is 4-20mA, 4 wire connections for isolated supply & 3 wires for non isolated supply. 2 wire loop powered output is also available. It is widely used for water, diesel, oil and chemical application.


Filpro Sensors Private Limited

130, 10th Cross Petechannappa Indl Estate, Kamakshi Palya, Magadi Road, Bangalore - 560079, Karnataka, India.

INDIA

+91-80-2328 6463 / +91-80-2348 9186 /

Send Enquiry
Cartridge Filters

Cartridge Filters completely removes oil, water & dirt from compressed air & other gases. This Filter removes 99.9999% of 0.01 micron size particles of oil, water & dirt continuously. The filters can be used for various Industrial and commercial water purification purpose. Its important specifications are its Filter Grades is 1, 3, 5, 10, 20, 30, 50, 75 µm, Maximum Differential Pressure is 50 psid (3.45 bar) @ ambient, 25 psid (1.72 bar) @ 125°F (52°C) and further filter cartridges are free of surfactants, anti-static agents, binders and adhesives.


Ascent Machineries & Engg. Services

Shop No. 2, 1st Floor, Nalanda Shopping Center, Station Road, Goregaon West, Mumbai,Maharashtra,India.

INDIA

+919953353441 / +(91)-(22)-22915887 / +(91)-(22)-66910293

Send Enquiry
Cast Steel Check Valve

Cast Steel Check Valves find wider usage in water, stream, air, gas and liquids having corrosive properties. These valves are made by using materials after carrying out all quality checks and processed by adhering stringent quality parameters. The rigid sturdy design promises a longer life span. It has swing check type, double flanged /butt weld end, bolted cover design. It is suitable for wide range of working conditions of pressures and temperature ratings.


Kirloskar Brothers Limited

Udyog Bhavan, Tilak Road, Pune 411 002, Maharashtra.

INDIA

+91 - 020 - 2444 0770 /

Send Enquiry
Cast Steel Swing Check Valve

Cast Steel Swing Check Valve is widely used in industrial chemical piping, oil, gas, petrochemical plant etc. The design offers a low-pressure drop operation, which makes the valve more energy efficient. The features are it is provided with bolted cover, it has swing type disc, it has ground & lapped seating surface, it is suitable for the horizontal & vertical pipe runs and the valves are available in both flange end & butt weld ends. Its size range is from NPS 1" ~ 12" (DN 25mm to 300mm) and the manufacturing standard is according to BS 1868.


Hyper Valves

R-2 & R-3, Arbuda Estate, Near Muthia Railway Crossing G.I.D.C., Phase-2 Naroda, Ahmedabd-382330.

INDIA

+91-79-22812065 / +91-9825047442

Send Enquiry
Centran G2

Centran G2 is a large, innovative pump that utilizes the patented "bi-directional, self-alignment system", allowing for greatly reduced friction. This allows the pump to run dry for a longer period of time.


Lutz - JESCO America Corp.

55 Bermar Park, Rochester, New York 14624, USA.

UNITED STATES

585-426-0990 / 800-554-2762

Send Enquiry
Centran G3

Centran G3 offers the patented "bi-directional, self-alignment system", therefore allowing dry running operation for extended periods without damaging the pump.


Lutz - JESCO America Corp.

55 Bermar Park, Rochester, New York 14624, USA.

UNITED STATES

585-426-0990 / 800-554-2762

Send Enquiry
Centran TMB

Centran TMB is a single stage, magneticallly driven transfer pump with centrifugal impeller. The pump is made entirely of thermoplastics with outstanding chemical and mechanical resistance. The spindle is made of ceramics, the bearings are reinforced PTFE and the o-ring gasket is made of FKM. Leakage problems are eliminated since a drive magnet on the outside of the casing drives the magnetic impeller inside the hermetic casing.


Lutz - JESCO America Corp.

55 Bermar Park, Rochester, New York 14624, USA.

UNITED STATES

585-426-0990 / 800-554-2762

Send Enquiry
Centran TMP

Centran TMP pumps are centrifugal, horizontal axis, and close-coupled with the bodies built entirely of reinforced thermoplastic polymers. The internal components are ceramic oxides, HD carbon, and fluorinated elastomers: which mean any contact of metallic parts with the pumped fluid is avoided. This combination of materials was correctly chosen to obtain the best performance.


Lutz - JESCO America Corp.

55 Bermar Park, Rochester, New York 14624, USA.

UNITED STATES

585-426-0990 / 800-554-2762

Send Enquiry
Centrifugal And Gear Pump

Centrifugal And Gear Pumps are designed and manufactured to transfer a variety of liquid in pharmaceutical, food processing, beverages, dary and other allied industries. The sanitary fitting and construction from high grade pressed stainless steel ensures smooth and even transfer of liquids. It has sturdy construction, it is easy to install, dismantle and assemble. The highly lapped and finished mechanical sealing system ensure leak-proof working. The complete unit is mounted on S.S base and castor wheels which also available love type transfer pump for high viscous liquid.


Veena Pharma Machinery

Mayur Society, Plot No. 80, Room No. D-2, Near Savarkar Nagar, Water Tank, Thane - 400606, Maharashtra, India..

INDIA

+91-9323958996 / +91-9004563628 / +91-9967707369

Send Enquiry
Centrifugal Chemical Process Pump

Centrifugal Chemical Process Pumps have low flow regulation, their flow varies widely with variations in system resistance, a characteristics that lends itself to easy flow control. The centrifugal pumps give steady flow at uniform pressure without pressure surges. This provides the greatest possible flexibility, developing & specific maximum discharge pressure under any operating condition with delivery controlled by either speed variation or throttling. The features are it has sizes range from NB 40mm to NB 150mm, it has flow rates from 1.0 M³/Hr. upto 500M³/Hr, it has head upto 150 Mtrs and further it has working pressure upto 25 Kg /cm².


Dynamic Pumps & Projects Pvt. Ltd.

1 & 2 Sangeeta Industrial Estate, Valiv Naka, Vasai East. Thane - 401208, India..

INDIA

+91-250-2451111 / +91-250-2458888 / +91-9323960804

Send Enquiry
1...45678...44

Looking to Buy Chemical Equipment? Place Your Request Now!