Pumps designed move process slurries,corrosive liquids, fluids through mechanical action

Pumps

ABEL HM Piston Diaphragm Pump

ABEL HM Piston Diaphragm Pump has been especially developed for operations with increased flow rates combined with high operating pressures.ABEL HM Piston Diaphragm Pump are available as single or double-acting models as well as assuring an increased performance, reliable functionality and especially low operating and maintenance costs.The ABEL HM Pumps are equipped with pre-formed diaphragm which remain stable throughout the duration of the pumping operations. The ABEL HM construction method has been tested in many various industries, as well as with very difficult media, and has been proved to be operationally secure as well as providing a very high membrane, service life time.ABEL HM Piston Diaphragm Pump can be used in mining industry, ceramic industries, chemical industries and sewage treatment plants.


ABEL Pumps, L.P.

79 N. Industrial Park, 207 Overlook Drive,Sewickley,PA 15143-2339,USA.

UNITED STATES

+1 (412) 741-3222 /

Send Enquiry
ABEL HMQ Pump

ABEL HMQ Pump is equipped with an integral reduction gear and can be fitted out with ball and/or API cone valves. The parts of the pump which will come into contact with the materials to be pumped are made of nodular cast iron (also rubber-coated), cast steel or stainless steel.ABEL HMQ Pump are easily identifiable due to their unique compactness and space-saving designs. They come to the fore when large volumes of abrasive materials need to be transferred under high-pressure conditions. This also applies when slurry with a high, mineral based content has to be transferred, in such environments as the mining and/or cement industry.


ABEL Pumps, L.P.

79 N. Industrial Park, 207 Overlook Drive,Sewickley,PA 15143-2339,USA.

UNITED STATES

+1 (412) 741-3222 /

Send Enquiry
ABEL HP Triplex Plunger Pumps

ABEL HP Triplex Plunger Pumps is used for high pressure cleaning with up to 16.0 MPa (2300 psi). These Plunger Pumps has proven its worth many times over, especially when used to clean filter cloths for chamber and membrane filter presses.HP Triplex Plunger Pumps can be used in the oil and gas industries, and for feeding combinator in the food industry.The plunger seal, which is adapted to meet the requirements of the application and pumping media, is made using V-rings or stuffing boxes. It is designed to meet the requirements of the media being pumped, various materials are used, such as high(-)quality stainless steel.


ABEL Pumps, L.P.

79 N. Industrial Park, 207 Overlook Drive,Sewickley,PA 15143-2339,USA.

UNITED STATES

+1 (412) 741-3222 /

Send Enquiry
ABEL SH Solids Handling Pump

ABEL SH Solids Handling Pump span a wide performance range and are also suited for a large number of pumping media and applications.These high pressure pumps really prove their worth when extremely abrasive, paste-like and compact media (e.g. dehydrated sewage sludge) have to be conveyed safely at high pressure.ABEL SH Solids Handling Pump is used for feeding incinerators for dehydrated and pre-dried sludge, hazardous waste, chemical residues, and solvents.


ABEL Pumps, L.P.

79 N. Industrial Park, 207 Overlook Drive,Sewickley,PA 15143-2339,USA.

UNITED STATES

+1 (412) 741-3222 /

Send Enquiry
Back Pull Out Pump

Back Pull Out Pumps are used across many heavy industries and these pumps are highly demanded in India as well as foreign countries. They are primarily used in commercial, agricultural, chemical and even in domestic domains. With greater strength and speed generation power makes them very versatile. The important features are it has multipurpose design, it has low cost and scientific design and further it is fast to flow even sharp liquid materials.


Aum Industrial Seals Limited.

E-18, Trimurti Society, New Sama Road Vadodara, Gujarat, India..

INDIA

+91-265-6451295;+91-265-6532064 / +91-9825047896;+91-9375747896

Send Enquiry
BR 40 Pneumatic Barrel Pump

BR 40 Pneumatic Barrel Pump is useful for safe and efficient handling of highly corrosive chemicals, solvents, acids, petroleum products, diesel oil, and fuel oils, plating solution, toxic chemicals etc. It eliminates danger of spillage, explosion hazards. The pump can be directly inserted in to the barrel and fits on the bung hole by means of threading provide on the pump adopter. It sucks the liquid from the bottom and hence less chances of leftover material. It does not have any type of motor and hence virtually zero maintenance.


Mandar Pumps & Engineering Co.

Unit No.127, Devendra Co-op. Indl. Premises, Lokmanya Nagar - 2, Thane (W) 400-606, India.

INDIA

91-22-25881651 / 91-22-22963171 / +91-98210 23351

Send Enquiry
Centrifugal Pump

Centrifugal Chemical Process Pumps can be used in the applications of wide range of corrosive chemicals. The Pumps Head is up to 100 Mtrs. It is available in models 1 H.P. to 100 H.P. Its Operating Speed is 1450 RPM & 2900 RPM. The Pump are in horizontal single stage, single volute with back pull out design. Open Impeller, Closed Impeller, Semi-Open Impeller with dynamic balanced is available.


J.K. Chemical Pumps

307/6, G.I.D.C. Industrial Estate, Opp. New Telephone Exchange, Makarpura, Baroda, Gujarat..

INDIA

+ 91 - 265 - 2645 651 /

Send Enquiry
Centrifugal Pumps

Centrifugal pumps are used for handling aggressive organic & inorganic fluids in the chemical & petrochemical industries. These Centrifugal Pumps are also used at refinery off-site, paper & pulp industries, food industries, Sugar industries etc. Its features are it is with modular construction, high interchangeability, fast delivery, versatile shaft sealing arrangement, gland packing asa standard arrangement and option to use mechanical seal.


Plastico Pumps

199/2, GIDC Estate, Behind Bank Of Baroda,  Nandesari, Vadodara, Gujarat..

INDIA

+(91)-(265)-2840787/ 3295818 /

Send Enquiry
Centrifugal Self Priming Mud Pumps

Centrifugal Self Priming Mud Pumps are ideal for the purpose of engine drive pumping. Moreover, known for their sturdy construction and error free functioning, these pumps are in great demand among industries. Its important features are it has long life due to replaceable wearing parts. It does not require any foot valve. Further automatic air is released during priming and it has dynamically balanced rotating parts. The Pump can be used in Industries like chemical, pharmaceuticals, food, cement, paper, sugar, salt and steel etc.


Flochem Pumps & Engineers

No. 44/6, Shree Dhanbai Estate, Narayan Mill Compound, Opposite CTM BRTS Bus Stand, CTM Cross Road, Ahmedabad, Gujarat..

INDIA

+918376806586/+(91)-(79)-25851160 / +(91)-9825066273

Send Enquiry
Centrifugal Thermic Fluid Pumps

Centrifugal Thermic Fluid Pumps which are mainly used in Pharmaceuticals & Chemical industries are equipped with water / self cooling feature that makes them suitable for the applications in heat transfer plants and handling of organic heat transferring of oils. In compliance with the latest industry standards, these pumps are designed with heavy duty bearings. Its important features are it has low maintenance, it is easy to operate and it has longer service life with capacity up to 250 m³/Hr.


Flochem Pumps & Engineers

No. 44/6, Shree Dhanbai Estate, Narayan Mill Compound, Opposite CTM BRTS Bus Stand, CTM Cross Road, Ahmedabad, Gujarat..

INDIA

+918376806586/+(91)-(79)-25851160 / +(91)-9825066273

Send Enquiry

Looking to Buy Chemical Equipment? Place Your Request Now!