Transmitters measure various liquids flow level pressure, current pressure inputs

Transmitters

3051S Pressure Transmitter

3051S Pressure Transmitter has been enhanced to allow new measurement possibilities in high-process temperatures or changing ambient conditions. It provides reliable flow measurement in high pressure applications with capabilities up to 15,000 psi (1034 bar). As processing applications increasingly operate in conditions with extreme pressures and temperatures, operators must vigilantly monitor equipment integrity and stability in order to prevent failures, safety hazards and decreased production. In industries such as offshore and onshore oil and gas and power generation where pressures can exceed 10,000 psi, it is critical that instrumentation be robust enough to provide accurate measurements on a consistent basis. The transmitter’s SuperModule platform and coplanar design reduce potential leak points by 50 percent compared to traditional designs.


Emerson Process Management

6021 Innovation Blvd, Shakopee, Minnesota 55379, United States.

UNITED STATES

+1 800 999 9307 / +1 952 906 8888 /

Send Enquiry
APR2000 Differential Pressure Transmitter

APR2000 Differential Pressure Transmitter provides a kind of reliable measuring way. It is used for measuring differential pressure (or pressure), level, density of liquid, gas or steam and convert the value of above into current signal output or digital protocol output. The pressures are directly applied to the isolating diaphragm that provide isolation and resistance against process fluid corrosion. Being microprocessor based, the electronic circuit is extremely versatile and accurate. Combined with the sensor precision, it provides the high accuracy and range ability.


Omicron Sensing Pvt Ltd

10, Sarang Street, Mumbai - 400 003, Maharashtra.

INDIA

+91 - 22 - 23422906 /

Send Enquiry
Capacitance Level Transmitter

Capacitance Level Transmitter is used in sensing level of liquids. It can be used for conductive as well as nonconductive liquids. It is offered with PTFE sleeve for better insulation & to withstand high temperature in conductive tanks the insulated probe acts as one electrode & the tank wall as another electrode, any change in liquid level the dielectric value will change thereby changing the capacitance value proportional to the liquid level. In case of nonconductive tanks, a reference probe is provided as ground electrode. The output is 4-20mA, 4 wire connections for isolated supply & 3 wires for non isolated supply. 2 wire loop powered output is also available. It is widely used for water, diesel, oil and chemical application.


Filpro Sensors Private Limited

130, 10th Cross Petechannappa Indl Estate, Kamakshi Palya, Magadi Road, Bangalore - 560079, Karnataka, India.

INDIA

+91-80-2328 6463 / +91-80-2348 9186 /

Send Enquiry
Conventional Level Transmitters

Conventional Level Transmitters are fully temperature conpensated. The Series 8000-SAN are solid state pressure and level transmitters based upon a piezo silicium sensor and a strong flush mounted diaphragm. The Series 8000-SAN units are especially designed to be non-clogging and capable of being cleaned in-place (CIP and SIP). They fully meet the needs of the food and beverage, chemical and pharmaceutical industries. In order to be fully compatible with the process they are monitoring, the Series 8000-SAN units offer a wide range of process connections and a choice of materials from which the wetted parts are fabricated.


MCI Transmitters

8001 Irvine Center Drive, Suite 825, Irvine..

UNITED STATES

+949-748-5960 /

Send Enquiry
Differential Pressure Transmitter

Differential Pressure Transmitter is used for measure flow and level, High accuracy, high reliability; Single port or double ports; measure the pressure difference of liquid in two places. It is mainly used in Food, Petrochemical, Power, Energy, Thermal, Refineries, Fertilizers, Beverages, Chemical / Pharmaceutical Industries. Its wetted parts are made with stainless steel and the sensor used is ceramic type.


Yash International

A-291/1, Okhla Industrial Area Phase-I, New Delhi.

INDIA

+91-11-26812754 /

Send Enquiry
Digital Level Transmitter

Digital Level Transmitter is the contactor type level transmitter. The important features are it is economical, it is suitable for high temperature/ chemical, it has rugged design, it has SS Stem and has SS / Viton Float. It is available in various lengths from 500 mm to 2000 mm and it suitable for liquids up to 150 degree C. The other specifications are it is accurate, it has resolution +/- 5 mm with 2 wire 4-20 mA output.


Charun Instruments

No. 210- C - D, 2nd Floor, Kalrav Commercial Complex, Opposite Maninagar Railway Station, Maninagar West, Ahmedabad - 380008, Gujarat.

INDIA

+(91)-(79)-25471190 / +(91)-9727750100 / +(91)-9033030100

Send Enquiry
DR6300 Radar Level Transmitter

DR6300 Radar Level Transmitter is a non-contact radar level transmitter specifically for solids. It is ideal for use in a wide range of industries such as minerals and mining, chemical, food, iron, steel, metals, pulp and paper. It offers a more stable measurement than pulse radar and is ideal for use under dusty process conditions. For very dusty atmospheres the DR6300 uses a unique Drop antenna design. It can operate at very low and very high process temperatures as long as the process connection temperature limits are observed.It features an optional directly accessible graphic touchscreen, an optional second current output and an installation wizard specifically for solids that permits the instrument to measure uneven surfaces accurately.


AMETEK Drexelbrook

205 Keith Valley Rd., Horsham, PA 19044, USA.

UNITED STATES

+1 215 674-1234 /

Send Enquiry
Industrial Temperature Transmitter

Industrial Temperature Transmitter is used in chemical, oil and gas and pulp and paper industries where robust reliable instrumentation suit hazardous conditions are necessary. The industrial temperature transmitter products improve the functionality of temperature measurement by increasing accuracy and reliability when compared to direct wired sensors. Each unit can be configured for a variety of sensor inputs: RTD, thermocouple, millivolt or ohm.


Carotek

700 Sam Newell Road P.O. Box 1395, Matthews, NC 28106, USA.

UNITED STATES

(704) 844-1100 /

Send Enquiry
M1200 Melt Pressure Transmitter

M1200 Melt Pressure Transmitter can be widely used in various plastic extrusion line for pressure measuring and control, such as chemical fibre manufacturing equipment, plastic rubber machine, polyester equipment and petrochemical industries. It is provided with the advantage of high precision and reliable pressure measuring and good quality, internal 80% calibration etc.


Omicron Sensing Pvt Ltd

10, Sarang Street, Mumbai - 400 003, Maharashtra.

INDIA

+91 - 22 - 23422906 /

Send Enquiry
P8700 OEM Pressure Transmitter

P8700 OEM Pressure Transmitter are used for various applications in Aviation Industry, Pharmceuticals, Refrigeration and HVAC Controls, Process Control, Motor Fuel Control, Water Pressure Monitoring and High end industrial machinery. The features are it has low cost OEM, it has wide temperature range, it is provided with crevice free stainless steel construction, it has no seals or o-rings, it has compact version and has over voltage protection to 16V DC.


Omicron Sensing Pvt Ltd

10, Sarang Street, Mumbai - 400 003, Maharashtra.

INDIA

+91 - 22 - 23422906 /

Send Enquiry
123

Looking to Buy Chemical Equipment? Place Your Request Now!