Transmitters measure various liquids flow level pressure, current pressure inputs

Transmitters

VEGABAR 81 Pressure Transmitter

VEGABAR 81 Pressure Transmitter is a transmitter with chemical seal for hot and chemically aggressive media. A wide range of diaphragm materials and coatings make this pressure transmitter an essential instrument across many sectors, particularly in the chemical and petrochemical industries. The pressure transmitter with chemical seal delivers reliable measurement data for feedback control systems or protective equipment, e.g. for continuous monitoring of process pressure in reactors, exhaust pressure of flue gas, e.g. in waste incineration, steam pressure control in steam drums, pressure monitoring in LNG tanks, pipeline pressure in dairies etc.


VEGA India Level and Pressure Measurement Pvt Ltd

3-B, 3rd Floor, Mutha Chambers II, Senapati Bapat Road, Shivaji Nagar, Pune-411016, Maharashtra, India.

INDIA

+91 20 4148 4148 /

Send Enquiry
Industrial Temperature Transmitter

Industrial Temperature Transmitter is used in chemical, oil and gas and pulp and paper industries where robust reliable instrumentation suit hazardous conditions are necessary. The industrial temperature transmitter products improve the functionality of temperature measurement by increasing accuracy and reliability when compared to direct wired sensors. Each unit can be configured for a variety of sensor inputs: RTD, thermocouple, millivolt or ohm.


Carotek

700 Sam Newell Road P.O. Box 1395, Matthews, NC 28106, USA.

UNITED STATES

(704) 844-1100 /

Send Enquiry
Capacitance Level Transmitter

Capacitance Level Transmitter is used in sensing level of liquids. It can be used for conductive as well as nonconductive liquids. It is offered with PTFE sleeve for better insulation & to withstand high temperature in conductive tanks the insulated probe acts as one electrode & the tank wall as another electrode, any change in liquid level the dielectric value will change thereby changing the capacitance value proportional to the liquid level. In case of nonconductive tanks, a reference probe is provided as ground electrode. The output is 4-20mA, 4 wire connections for isolated supply & 3 wires for non isolated supply. 2 wire loop powered output is also available. It is widely used for water, diesel, oil and chemical application.


Filpro Sensors Private Limited

130, 10th Cross Petechannappa Indl Estate, Kamakshi Palya, Magadi Road, Bangalore - 560079, Karnataka, India.

INDIA

+91-80-2328 6463 / +91-80-2348 9186 /

Send Enquiry
Digital Level Transmitter

Digital Level Transmitter is the contactor type level transmitter. The important features are it is economical, it is suitable for high temperature/ chemical, it has rugged design, it has SS Stem and has SS / Viton Float. It is available in various lengths from 500 mm to 2000 mm and it suitable for liquids up to 150 degree C. The other specifications are it is accurate, it has resolution +/- 5 mm with 2 wire 4-20 mA output.


Charun Instruments

No. 210- C - D, 2nd Floor, Kalrav Commercial Complex, Opposite Maninagar Railway Station, Maninagar West, Ahmedabad - 380008, Gujarat.

INDIA

+(91)-(79)-25471190 / +(91)-9727750100 / +(91)-9033030100

Send Enquiry
VEGABAR 87 Submersible Pressure Transmitter

VEGABAR 87 Submersible Pressure Transmitter is used for pressure and level measurements of liquids and viscous products with higher temperatures in the chemical, food processing and pharmaceutical industry. With VEGABAR 87 it is possible to detect even smallest measuring ranges from 0.1 bar. The benefits are it has maximum reliability even with rapidly changing process temperatures, it has high plant availability through vacuum-resistant version and further it have very good cleanability and high chemical resistance through adapted materials. Its measuring distance range is 250 m, its measuring pressure range is 0 ... 25 bar and further its process temperature range is -12 ... 100 °C.


VEGA India Level and Pressure Measurement Pvt Ltd

3-B, 3rd Floor, Mutha Chambers II, Senapati Bapat Road, Shivaji Nagar, Pune-411016, Maharashtra, India.

INDIA

+91 20 4148 4148 /

Send Enquiry
Conventional Level Transmitters

Conventional Level Transmitters are fully temperature conpensated. The Series 8000-SAN are solid state pressure and level transmitters based upon a piezo silicium sensor and a strong flush mounted diaphragm. The Series 8000-SAN units are especially designed to be non-clogging and capable of being cleaned in-place (CIP and SIP). They fully meet the needs of the food and beverage, chemical and pharmaceutical industries. In order to be fully compatible with the process they are monitoring, the Series 8000-SAN units offer a wide range of process connections and a choice of materials from which the wetted parts are fabricated.


MCI Transmitters

8001 Irvine Center Drive, Suite 825, Irvine..

UNITED STATES

+949-748-5960 /

Send Enquiry
DR6300 Radar Level Transmitter

DR6300 Radar Level Transmitter is a non-contact radar level transmitter specifically for solids. It is ideal for use in a wide range of industries such as minerals and mining, chemical, food, iron, steel, metals, pulp and paper. It offers a more stable measurement than pulse radar and is ideal for use under dusty process conditions. For very dusty atmospheres the DR6300 uses a unique Drop antenna design. It can operate at very low and very high process temperatures as long as the process connection temperature limits are observed.It features an optional directly accessible graphic touchscreen, an optional second current output and an installation wizard specifically for solids that permits the instrument to measure uneven surfaces accurately.


AMETEK Drexelbrook

205 Keith Valley Rd., Horsham, PA 19044, USA.

UNITED STATES

+1 215 674-1234 /

Send Enquiry
Pressure transmitters

Pressure transmitters are renowned for providing robust performance and reliable pressure measurement in the toughest environments - highly corrosive media, damaging cyclic pressure etc. The pressure transducers are designed for accurate and repeatable measurement for all pressure ranges and most temperature applications in Chemical Industries.


Care Process Instruments

SF-6, 2nd Floor, Parimal Park Complex, Besides Of Srihari Complex, Opposite Samir Hotel, Bombay Conductor Road, Phase - 1, G. I. D. C., Vatva, Ahmedabad, Gujarat..

INDIA

+918586975553 / +(91)-(79)-25891550 / +(91)-(79)-40083469

Send Enquiry
M1200 Melt Pressure Transmitter

M1200 Melt Pressure Transmitter can be widely used in various plastic extrusion line for pressure measuring and control, such as chemical fibre manufacturing equipment, plastic rubber machine, polyester equipment and petrochemical industries. It is provided with the advantage of high precision and reliable pressure measuring and good quality, internal 80% calibration etc.


Omicron Sensing Pvt Ltd

10, Sarang Street, Mumbai - 400 003, Maharashtra.

INDIA

+91 - 22 - 23422906 /

Send Enquiry
12

Looking to Buy Chemical Equipment? Place Your Request Now!

www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X