Valves allows fluid conveyance, isolation, gas venting, recycling, cross tying


Gate valve

Our company offers K-TECH gate valves, which are designed to provide minimum turbulence & resistance to flow when in fully open position. These gate valve ensures accurate control & alignment of wedge while operating.


3 Shukan Estate, Nr. Zaveri Estate, opp. Goga Maharaj Temple, Kathwada-Singarwa Road,.


9913422970 / +919913422970

Send Enquiry
Gate Valves

Gate Valves are used for isolation services in Oil & Gas, Petrochemical, Fossil Fuel and Nuclear Power, Steel, Chemical, Fertilizer, Mining and Solar sectors offering excellent shut-off features and minimal pressure loss through the valve. The valves are primarily designed to start or stop flow, and when a straight-line flow of fluid and minimum flow restriction are needed. In service, these valves generally are either fully open or fully closed. The disk of a gate valve is completely removed when the valve is fully open; the disk is fully drawn up into the valve bonnet. This leaves an opening for flow through the valve at the same inside diameter as the pipe system in which the valve is installed. A gate valve can be used for a wide range of liquids and provides a tight seal when closed.

Forbes Marshall Pvt Ltd

P B # 29, Mumbai-Pune Rd., Kasarwadi, Pune 411 034, Maharashtra, India.


+91-20-39858555 /

Send Enquiry
Gate Valves

Gate Valves is a valve that opens by lifting a round or rectangular gate/wedge out of the path of the fluid. It is designed for high pressure and high temperature applications, for a wide range of fluids except slurries and viscous fluids. These valves are generally used in the wide open or closed position, are not recommended for throttling service because throttling causes disc chattering and vibration which is likely to erode the seating surface and cause leakage. Its application include in Petroleum, Power Generation, Chemicals, Fertilizer, Steel industry etc. Its temperature range is from -100 °C to 800 °C and pressure rating is vacuum upto 621 BAR.

Fluidline Valves Co. Pvt. Ltd.

401 - A, Poonam Chambers, 115, Dr. Annie Besant Road, Worli, Mumbai 400 018 India.


+91-22-24944057 / +91-22-24942494 /

Send Enquiry
Gauge Valve

Gauge Valves include multiport or block and bleed style for pressure gauge isolation, calibration and venting. Metal and soft seat options are available for use in gas or liquid service and rated up to 10,000 psi (690 barg). The material of construction is CS, SS, Monel, Hastalloy, Duplex and High Nickel alloys. Its connections is ¼” to 1” threaded, welded, flanged or compression ended. The pressure (max) is 10,000 psig (690 barg) and the temperature (max) is 1000 °F (538 °C).

Colson X-Cel Ltd

Park Works, Park Road, Elland, West Yorkshire, HX5 9HN, England, United Kingdom.


+44 (0) 1422 377999 /

Send Enquiry
Gear Operated Butterfly Valve

Gear Operated Butterfly Valve meet various customer demands including Power plants, Distillery, Paper and Pulp Industry, Sugar Industry, HVAC, Water treatment plants, Construction Industry, Chemical and Pharmaceutical Industries. Its operating temperature range is from -30ºC to 130ºC and further its body type is single piece, short wafer or wafer lugged.

CRI Pumps Private Limited

480-481, Sathy Main Road, Kurumbapalayam, SS Kulam Post, Coimbatore-641107, Tamil Nadu, India.


+91-422-3027000 / 1800 200 1234 /

Send Enquiry
Gear Operated Offset Disc Design Butterfly Valve

Gear Operated Offset Disc Design Butterfly Valves are reliable, maintenance free, tight shutoff, and control valves. It can be utilized universally. Its application range includes, process in the chemical, pharmaceutical, power, plant, paper, sugar, drilling rigs, cooling, water treatment plants, & even in the construction industries for compress air, water, fuel, oils, gases, slurries with suitable seat (lining) & disc material for a wide range of pressure & temperature. The size available is 40mm to 1200mm.

Flow-Tek Valves & Controls

Plot No. 172-173, Road No. 4, G.I.D.C. Estate, Kathwada, Ahmedabad - 382 430, Gujarat, India.


+91-9824080899 /

Send Enquiry
Glass Lined Discharge Valve

Glass Lined Discharge Valves are used in pharmaceutical, chemical and agrochemical industry. The glass lined flush valve can be pneumatically controlled and remotely operated. It is particularly suitable for use in the occasions where the space under the glass lined reactor is small and on-site operation is inconvenient. It can be designed with the flange interface which complies with chinese standard, american standard or japanese standard as per customer needs. A PTFE seal ring is used for the sealing of valve element and the inner surface in contact with materials is glass lined.

Jiangsu Dereet Glass Lined Chemical Equipment Co.,Ltd

No.1 WeiLiu Road, Yupo Road, Chengbei Industrial Park, Jingjiang, Jiangsu, P.R.C214500.


+86-523--89110022 /

Send Enquiry
Globe 2 Way–110 Valve

Globe 2 Way–110 Valve with its classic globe body shape, which reflects its name, uses the variable area generated between the plug and seat to control fluid flow. It is very versatile offering reduced trim options as well as a variety of special trims for severe high pressure drop applications.This style of valve is easily adapted for use on cryogenic temperature and for high temperature duties. This valve is preferred for tight shut – off, positioning accuracy, high rangeability and simplified maintenance, satisfy the majority of control valve applications throughout the process and power industries in control of Air, Steam, Water, Gas, Chemicals etc.

Spink Controls

R.No. 1 A, Vilas Apartment, Sant Tukaram Path, Kopri, Thane (E) - 400 603, Maharashtra, India..


+ 91-22-2532 8223 ; +91-22-2532 8224 /

Send Enquiry
Globe Valve

Globe Valve is to regulate or throttle fluid flow none to full capacity. They may be operated efficiently with the stem in any position from wide open to fully closed. The changed in direction of fluid flow through the valve produces increased resistance & considerable pressure drop in globe valves. Its size range from 15 mm through 500 mm and the material of construction is cast carbon steel to ASTM A 216 Gr. WCB Cast st. Steel to ASTM A 351 Gr. CF 8, CF8M, CF 3, CF 3M, Alloy-20 to A351 Gr. CN 7 m. hastelloy B & C, Monel and other alloy steel.

Accura Valve

A/46 Uday Industrial Estate, Nr. Odhav Police Station, Odhav, Ahmedabad, Gujarat, India..


+91-79-22892042 / +91-9898698680

Send Enquiry
Globe Valve

Globe Valves are generally available with plug type disc, which is designed to give leak tight seating over a long period of in built wear life. The globe valves body seat ring is shoulder type, threaded body seat ring which has large taper area that is for ample seating. Two nos. slots are provided on body seat ring, which is for easy removal for servicing at site. Welded type seat ring & integral seat ring are also available in globe valve. All globe valve stem is made from solid one piece construction. The standard range of globe valve is in sizes of up to 24" (600mm).

Reliable Valves

Plot No. G-505, Road - B, Kishan Gate, Lodhika G.I.D.C., Metoda - 360 021, Dist. Rajkot, Gujarat - INDIA.


+91-2827-287257 /

Send Enquiry

Looking to Buy Chemical Equipment? Place Your Request Now!