Valves allows fluid conveyance, isolation, gas venting, recycling, cross tying

Valves

23E PTFE-Lined Rotary Plug Control Valve

23E PTFE-Lined Rotary Plug Control Valve is designed for general service application up to the limits of the ANSI 150 pressure class rating. These general service applications focus on extremely corrosive media found in chemical processes. The Pfeiffer 23e design increases flow capacities but also reduces the pressure recovery factor making the design more susceptible to cavitation, flashing, and flow noise generation. The design of this rotary plug allows for bi-directional flow with flow pushing plug out of seat, the preferred direction for control valve applications and flow pushing plug into seat, the preferred direction for shut-off applications. The size range is from 1" to 4" and its temperature range is from -10 to 200 C.


Samson Controls Pvt Ltd

604,Pentagon P3, Magarpatta City, Hadapsar, Pune 411028, Maharashtra, India.

INDIA

+9120 67246600 /

Send Enquiry
282 Series Ball Valves

The 282 series manual ball valves are full port, brass, manual ball valves. They are available with NPT Female, NPT Male x Female, and Solder end connections. Four different manual handle styles are offered.


Assured Automation

19 Walnut Avenue Clark, NJ 07066, USA.

UNITED STATES

732-381-2255 / 1-800-899-0553

Send Enquiry
3 Way Ball Valve

3 Way Ball Valve is used in Chemical Dosing, Gas and Pneumatic applications. The important features are it has 3/2 piece construction with side entry ball concept, it has floating / trunnion mounted ball valve , it is provided with live loaded seat concept, it has pressure rating such as #150,#300 and #600 and further its mode of operation is Worm Gear, Pneumatic and Electrical.


V- Tork Controls

E-71, SIDCO Industrial Estate (Post), Kurichi, Coimbatore, Tamilnadu, India..

INDIA

+91-422-3223111 / 093611 88111

Send Enquiry
3/2 Normally Closed Solenoid Valve

3/2 Normally Closed Solenoid Valves body material is SS 316/ aluminium hard anodized. It has pressure range from 0-150 bar. The media is gas, oil, air etc. The ports are threaded, sub base mounted. The Type provided is 30150 Subbase Port, 30152 Threaded Port.


Rotex Automation Limited

987/11, GIDC Estate, Makarpura, Vadodara-390 010, Gujarat, India..

INDIA

+91-265 2638136 ;+91-265 2638795 / +91-265 2638746

Send Enquiry
3/2-Way Direct Acting Solenoid Valves

3/2-Way Direct Acting Solenoid Valves is available in normally closed, normally open, universal type. The sizes are 6 mm (1/4") to 15 mm (1/2"). The differential pressure is from 0 to 7 bar. The temperature of fluid is from -5°C to 120°C. Further it can handle air, water, gas, light oil, corrosive fluids etc.


Avcon Controls Pvt Ltd

Plot no. 65, Road No. 13, MIDC, Marol Area, Andheri (East), Mumbai 400 093, Maharashtra, India.

INDIA

91-22-2834 9971/ 91-22-2834 9973 / 91-22-2834 9134

Send Enquiry
3/3-Port Directional Control Valve

3/3-Port Directional Control Valves are used for operating pressures of up to 1,000 bar and this directional control valve in combination with the electronic control system allow for easy, swift and continuous regulation of the variables flow and pressure in gases and fluids with a high level of repeating accuracy. The valve is manufactured in sizes NG 4 (HPV 4) and NG 10 (HPV 10) and can be supplied with or without integrated pilot control hydraulic supply. The valve is a metallic seal 3/3 way-seat valve. The opening and closing takes place by means of a hydraulic actuated set piston.


Maximator India Pvt. Ltd.

614, Veena Killedar Ind. Estate, 10/14, Pais Street, Byculla(W), Mumbai 400011, India..

INDIA

+91-22-23094775 / +91-22-23009210 /

Send Enquiry
3335 Lined Butterfly Control Valve

3335 Lined Butterfly Control Valve is designed for general service applications up to the limits of the ANSI 300 pressure class rating. The lined seat ring of the 3335 is made of either EPDM or PTFE which is ideal for tight sealing applications with extremely corrosive media found in chemical processes. The Type 3335 design increases flow capacities but also reduces the pressure recovery factor making the design more susceptible to cavitation, flashing, and flow noise generation. The centric design and lined seat ring of this butterfly valve will increase breakaway torques required from the actuator. The size range is from 2" to 12" and the temperature range is -10 to 150 C.


Samson Controls Pvt Ltd

604,Pentagon P3, Magarpatta City, Hadapsar, Pune 411028, Maharashtra, India.

INDIA

+9120 67246600 /

Send Enquiry
502 Series Pneumatic Valve

502 Series Pneumatic Valves have higher flow rates; less power consumption; and exceptionally easy on-site installation, configuration, and modification. The modular 502 Series (18 mm) is a general purpose industrial valve for automation and piloting applications in the automotive and tire, food and beverage, pharmaceutical, and packaging machinery industries. The valve has the flexibility of meeting the ISO 15407-2 standard while maintaining its high-flow characteristics. In addition, the performance of the 502 Series dual-pressure sandwich regulator, plus the accuracy of the company's Numasizing engineering tool, allow the end user to dramatically reduce compressed air and power consumption. The valve is designed for use with ASCO's next-generation Numatics G3 fieldbus electronic platform that is easy to assemble, commission, and maintain.


Asco

160 Park Avenue, Florham Park, NJ, 07932, USA.

UNITED STATES

800-972-2726 /

Send Enquiry
567 BioStar Control Valve

567 BioStar Control Valve is used for controlling the inflow and outflow of bioreactors in the pharmaceutical industry. It is available in the nominal sizes DN 8 to DN 20. The body is manufactured, as standard, from block material with a grade of surface finish of Ra 0.4 µm. In addition to the PTFE diaphragm, another seal made from FKM is used. It is the new, safe solution for media controls from 0.08 to 4.1 m³/h. The valve is also optimally equipped when it comes to hygienic safety. It meets both the standards of the EHEDG cleaning test and the standards in accordance with the American 3A definition.


GEMU Gebruder Muller Apparatebau GmbH & Co. KG

Fritz-Muller-Strabe 6-8, 74653 Ingelfingen-Criesbach, Germany.

GERMANY

+49-79 40-123 0 /

Send Enquiry
AVK Series 57/14 Resilient Seated Gate Valve

AVK Series 57/14 Resilient Seated Gate Valve is widely used for coal seam gas applications. It have face to face dimension confirm to AS 2638.2, DN50-300, PN20. It is flanged to ANSI 150 flat face. Optional extras include handwheel, ISO flanging for actuation and gearbox. It is available with EPDM. It has reduced weight and further is environmentally friendly.


AVK Group

Søndergade 33, DK-8464 Galten, Denmark.

DENMARK

+4586943888 /

Send Enquiry
12345...26

Looking to Buy Chemical Equipment? Place Your Request Now!