Valves allows fluid conveyance, isolation, gas venting, recycling, cross tying

Valves

Type 0330 2/2 or 3/2 Way Pivoted Armature Valve

Type 0330 2/2 or 3/2 Way Pivoted Armature Valve is a direct-acting, media-separated pivoted armature valve. It is available in 3/2- and 2/2-way versions. As a 3/2-way version, it can be used as a distributor or mixing valve. Various diaphragm material combinations and methods of operation are available depending on the application. Stainless steel (316L), PVDF, and polypropylene housing versions complete the offering. The solenoid coils are moulded with a chemically resistant epoxy. For reduced energy requirements all coils can be delivered with electronic power reduction or as an impulse version. In combination with a plug in accordance with DIN EN 17301-803 Form A, the valves satisfy protection class IP65/67 – in combination with a stainless steel or plastic housing NEMA 4X. It is suitable for aggressive alkaline and acidic solutions.


Burkert Contromatic Pvt Ltd

No M6, Type - II, Thiruvanmyur, Dr Vikram Sarabhai Instronic Estate, Chennai 600041, India.

INDIA

+91 (44) 6462 5800 /

Send Enquiry
Type 3241 Threaded Seat Globe Valve

Type 3241 Threaded Seat Globe Valve is designed for general service applications up to the limits of the ANSI 300 pressure class rating. These general service applications include process events such as erosion, abrasion, corrosion, cavitation, and flashing found in most process control industries.The Type 3241 has several standard options such as temperature extensions, metal bellows seals, heating jacket, high performance metal sealing trim, soft sealing trim, noise attenuation and cavitation prevention trim sets. In addition to these options the valves can be specialized to meet the exact process needs such as NACE version for sour gas service, cleaned for specific service (e.g. Oxygen, Chlorine, High Purity, etc.), or the pressure swing adsorption (PSA) design. Its size is 1/2" to 12" and the temperature range is -196 to 450 C.


Samson Controls Pvt Ltd

604,Pentagon P3, Magarpatta City, Hadapsar, Pune 411028, Maharashtra, India.

INDIA

+9120 67246600 /

Send Enquiry
Type 3246 Cryogenic Control Valve

Type 3246 Cryogenic Control Valve is designed for cryogenic service applications up to the limits of the ANSI 900 pressure class rating. Also included is a long insulating section as well as a circulation inhibitor to minimize the effects of the medium flow in the insulating section. These control valves are designed according to the modular assembly principle, can be equipped with the company's actuators and valve accessories such as positioners, limit switches, and solenoid valves. It has size from 1/2" to 10" and the temperature range is -196 to 65 C.


Samson Controls Pvt Ltd

604,Pentagon P3, Magarpatta City, Hadapsar, Pune 411028, Maharashtra, India.

INDIA

+9120 67246600 /

Send Enquiry
Type 3349 Aseptic Angle Control Valve

Type 3349 Aseptic Angle Control Valve is designed for the strict sanitary requirements of the food, beverage, and pharmaceutical industries that includes the use of USP-VI diaphragm. The valve body is designed without cavities, having a smooth, polished, satin, or mirror finish on internal and external surfaces, and the stem guide is sealed by a diaphragm. A test connection enables the diaphragm to be monitored for leakages. Its size range is 1/2" to 4" and the temperature range is 0 to 160?.


Samson Controls Pvt Ltd

604,Pentagon P3, Magarpatta City, Hadapsar, Pune 411028, Maharashtra, India.

INDIA

+9120 67246600 /

Send Enquiry
Type 3351 On/Off Globe Valve

Type 3351 On/Off Globe Valve is used for tight closing applications for liquids, gases and vapors. The Type 3351 on/off control valve has standard options such as temperature extensions, and metal bellows seals. The Type 3351 on/off valve is assembled with a pneumatic actuator and an optional hand wheel can be added to the control valve construction. These control valves are designed according to the modular assembly principle, can be equipped with various accessories associated with on/off control such as limit switches and solenoid valves. The size is 1/2" to 4" and its temperature range is from -50 to 250 C.


Samson Controls Pvt Ltd

604,Pentagon P3, Magarpatta City, Hadapsar, Pune 411028, Maharashtra, India.

INDIA

+9120 67246600 /

Send Enquiry
Type 459 IC Valve

Type 459 IC Valve is a threaded or flanged safety valve with compact dimensions for economical protection of small and mid sized capacities for thermal applications. It is available with UV stamp. It is widely used in industries such as thermal relief applications for Oil & Gas, utility steam, air / gas compressors, pump discharge, mobile tank (transport system), chemical equipment and piping, pressure vessels etc.


Leser India

136/137, Sanjay Bldg. No. 3, Mittal Estate Marol, Andheri Kurla Road, Andheri (E), Mumbai - 400 059, Maharashtra, India.

INDIA

+91 22 2853 2200 /

Send Enquiry
Type 526 IC Valve

Type 526 IC Valve meet all the requirements of API 526 such as standardized capacity, nominal diameter, and center to face dimensions which offers 100% compatibility. It is widely used in Oil and Gas Industry, Chemical Industry, Petrochemical Industry, Energy, Technical Gases etc.


Leser India

136/137, Sanjay Bldg. No. 3, Mittal Estate Marol, Andheri Kurla Road, Andheri (E), Mumbai - 400 059, Maharashtra, India.

INDIA

+91 22 2853 2200 /

Send Enquiry
Type 568 Lug Style Butterfly Valve

Type 568 Lug Style Butterfly Valve has fully pressure rated at 150 psi to allow for easy system expansion to the pipeline without the expense of system shutdown.It's applications include industrial water treatment, potable water treatment, swimming pools, water parks and waste water systems in such industries as chemical, chemical distribution, electroplating and power plants.


GF Piping Systems

2882 Dow Avenue, Tustin, CA 92780-7258, USA.

UNITED STATES

(714) 731-8800 /

Send Enquiry
U - Series Lug Type Knife Gate Valves

U - Series Lug Type Knife Gate Valves are mainly used in power, mining, pulp & paper, waste water, cement and chemical industries. These valves are used to handle very dense mixtures of stock and slurries. The shearing action of the knife gate cuts through solids and cleans the seat as it closes. It ha smooth flow and non clogging full port design. Further it has solid single piece cast body, it has uni-directional lug type and it is metal seated and soft seated.


V- Tork Controls

E-71, SIDCO Industrial Estate (Post), Kurichi, Coimbatore, Tamilnadu, India..

INDIA

+91-422-3223111 / 093611 88111

Send Enquiry
Upper Opening Flash Bottom Valve

Upper Opening Flash Bottom Valve are vessel valves used mainly in Reaction vessel to completely flash material from the bottom of the vessel. It avoids unreacted material being left in the bottom outlet nozzles. It is specially made as upper opening or down opening depending on the space between the agitator and the bottom of the vessel.


SS Engineering

C1-B, Hatkesh Udyog Nagar, Kashi Mira Bhayander Road, Mumbai 401104, Maharashtra, India.

INDIA

+91-22-2812 5478 / +91-22-2811 1541 / +91-22-2813 1648

Send Enquiry

Looking to Buy Chemical Equipment? Place Your Request Now!