Valves allows fluid conveyance, isolation, gas venting, recycling, cross tying


Gate Valve

Gate Valves are used where a minimum of pressure drop through. They are designed to permit either a straight, full & free flow of the fluid or no flow at all. The construction keeps stem threads outside the valve & is recommended where high temperature, corrosive, & solids in the line might damage stem threads inside the valve. When the hand wheel is turned, the stem rises as the yoke bushing engages the stem threads enable the easy lubrication. Care must be taken, however, to protect exposed stem threads from damages.

Shree Chamunda Valves Pvt. Ltd.

23/A, Gopal Estate, B/h. Harshad Chambers, Vallabhnagar, Odhav, Ahmedabad-382415.


+91-79-22970963 / +91-9925046278

Send Enquiry
Industrial Valves

Industrial Valves are widely used for water distribution, chemical refining and beverage products preparation. These are designed using superior-grade raw material and the important features are it has perfect finish, it has high tensile strength and further it has low operating torque. These are exclusively designed as per latest market trends.

Das Engineering Works

Unit - 4, Scout Camp Road, Behram Baug, Jogeshwari West Mumbai, Maharashtra, India..


+91-22-26741127 / +91-9322504620

Send Enquiry
Cast Steel Gate Valve

Cast Steel Gate Valves are designed and manufactured to provide maximum service life and dependability. The valves opens by lifting a round or rectangular gate/wedge out of the path of the fluid. The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar. The gate faces can form a wedge shape or they can be parallel. Typical gate valves should never be used for regulating flow, unless they are specifically designed for that purpose. It is provided with BS 1414 specification for Steel Wedge Gate Valves (Flanged and Butt-welding Ends) for the petroleum, petrochemical and allied industries.

Kojo Valve

Dongou Industrial Zone, Oubei Yongjia, Wenzhou 325105, Zhejiang, China..


0086-577-67959556 / 0086-577-67257777

Send Enquiry
Jacketed Plug Valve

Jacketed Plug Valve is provided with full jacketed design and has multiple connection for proper jacket drainage and is specially designed for circulation of hot or cold liquid or gas. The bi directional flow inline PTFE sleeve surrounds the plug unique body & plug design for low torque operation and further the self-sealing design is suitable for vacuum service and further it has low maintenance cost. The size is from 15 mm to 300 mm. Its operation can be manual, pneumatic or electric.

G M Engineering Pvt. Ltd.

Plot No: 2632 G.I.D.C., Lodhika Metoda - 360 021 (Rajkot). Gujarat, India..


+91-2827-287658 / +91-9227655581 / +91-9228005559 / +91-9228005558

Send Enquiry
Cast Iron Ball Valve

Cast Iron Ball Valve size range is from 1 to 4"(25-100mm). The manufacturing standards are as per BS 5351. It is tested as per BS 5146. The valves end connections are available in Screwed BSP/NPT & Flanged as per ASA class 150 / BS 10 Table "D", "E" / ANSI B 16.5. It have found best application in Pharmaceutical Industries, Chemical, Petro-Chemical, Oil Refineries, Power Plants etc.

Floport Valves (P) Ltd

SP – 29/38, Third Main Road, Ambattur Industrial Estate, Chennai – 600 058, Tamil Nadu, India..


+91- 44-2625 9796 / +91-94440 55503 / +91 94440 55504

Send Enquiry
Butterfly Valve

Butterfly Valves are widely used for the hydrocarbon, energy and process industries. Its size range is from 2” up to 88“ (DN 50 up to DN 2200) and the pressure rating is ASME 150# to 900#. Its design standard is according to API 609 MESC SPE 77 / 134, BS 5353 BSEN593, ANSI AWWA C504-94. The valves are available in four different types versions such as Double Offset, Triple Offset, Centre Disc, Extended Stem etc.

Hawa Valves (India) Pvt. Ltd.

R16, TTC Industrial Area, Rabale, Thane Belapur Road, Navi Mumbai (New Bombay) – 400 701 INDIA..


+91-22-67760000 / +91-22-27697766 /

Send Enquiry
Butterfly Valve

Butterfly Valves is provided with API 609/ BS 5155 design. The testing is according to BS 6755. Wafer/Lug/Double Flange end connections are available. The material of construction is according to CI/WCB/CF 8/CF 8M/CF 3/CF 3M/AL.Bronze. It is provided with NBR/EPDM/VITON/SILICON/NEOPRENE/PTFE lining. Further the size range is from 40 mm to 700 mm.

Liberty Valves Private Limited

15 & 16, Jeenam Industrial Estate, Dhumal Nagar, Waliv Road, Vasai (East), Dist. Thane, Pin Code - 401 208, Maharashtra, India..


+91-250-6453322 / +91-9821159716

Send Enquiry
Butterfly Valves

Butterfly valves is suited for most applications having to do with isolation and control of liquids, gases etc. The important features are the valve offer long life through high cycle capabilities, it provides adjustable torque seating and non rubbing seal to seat contact and further it can be also used as a device for the isolation and control of water pipelines in diameters from 150–3000 mm. The product is suitable for water treatment, desalination and chemical process facilities.


5500 Wayzata Boulevard, Suite 800, Minneapolis..


+1-763-545-1730 /

Send Enquiry
Pressure Vacuum Relief Valve

Pressure Vacuum Relief Valves are designed with the focus on tank protection. The valves are widely used in digesters and gas holders, storage tank vents, chemical processing plants, marine loading systems, vapor recovery systems, sewage treatment vapor processing and pharmaceutical industries. The features are it is provided with wide range of pressure and vacuum settings to provide maximum tank protection, it is available in dead weight and spring loaded mechanism, it is designed as per API-2000 6th edition and the size ranges is from 25 NB to 300 NB.

Combustion Research Associates

A-52, Sector-83, Phase-II, Noida - 201305, Uttar Pradesh, India.


+91-120-4156787 / +91-8506009431 / +91-8506009429

Send Enquiry
Manual Bellows Seal Isolating Valves Series 8700

Manual Bellows Seal Isolating Valves Series 8700 are used for applications which require low internal volumes of chemicals within the valve body and will be used on lower pressure applications. The isolating valve gives tight shut off and zero emissions outside of the pressure envelope. Its sizes forged is 1 1/2” (DN40) and the body material used is Carb steel, stainless steel or CW12MW NiCrMoW, Nickel alloy. Its sizes cast is 2” to 8” (DN40 to DN200) and the body material is A216 WCB, A352 LCC Carb Steel, A351 CF8M St Steel, A494 M35-1 NiCu Alloy, CW12MW NiCrMoW Alloy.

Flowstream International Ltd

Unit 5, Station Road industrial Estate, Station Road, Stockport, SK5 6ND, United Kingdom.


+44 (0) 161 425 7421 /

Send Enquiry

Looking to Buy Chemical Equipment? Place Your Request Now! uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X