analyzers Suppliers

Moisture Analyzer are perfect for environmental, quality control, food and beverage, chemical, pharmaceutical industries, and more, this fast, rugged analyzer gives customers the flexibility they need and the accuracy they require for moisture determinations. The instrument combines state-of-the-art heating with highly accurate weighing technology to deliver a faster, more precise method of moisture analysis. Infrared halogen technology begins drying customer sample in seconds. The unique gold reflective housing serves to create a more uniform distribution of heat, improving analyzer accuracy.

H2S Analyser with Vapour Phase Processor are compact bench-top instruments, used to measure the total hydrogen sulphide (H2S) content of fuel oils, such as marine residual fuels, distillates and petroleum blend stocks. The H2S Analyser can measure H2S concentrations from 0 to 250 mg/kg (ppm) in the liquid phase. H2S is efficiently purged from the test sample by a combination of heat and agitation, and is measured by a proprietary advanced gas specific detector. The instrument offers a cost effective solution for H2S measurement - no costly or hazardous chemicals are required and there is no need for analytical preparation by an experienced chemist.

Brabender Aquatrac-3E is a moisture meter for use with solid products in granular form and is designed to meet requirements of the plastic processing industry. It detects water content down to 0,0005 %. It is robust and portable thus being suitable for shop floor use. As the principle of operation is an absolute chemical method, no calibration is required for each different substance tested. The sample weight is fairly high and is therefore representative of the batch being tested.The water content of High-Tech plastic material has a great influence on the quality of the finished product.

Multi-component Analyzer is capable of measuring a wider selection of gas components utilizing many different types of sensor technology. Non-dispersive infrared (NDIR) modules are available to measure gases such as CO, CO2, NO, N2O, CH4, SO2 and others. Designed to be compact and lightweight, the analyser may have up to three sensor modules installed in a single analyzer case. This unique feature means the analyser can be used today for a broad range of applications including research and development or environmental pollution monitoring, where efficiency and space-saving are crucial.

Particle size distribution analyzers determine both the size of particles and their state of distribution and are used for the production control of powders in such fields as ceramics, chemistry, and foodstuffs. Furthermore, in addition to analyzing the sub-0.1 micron particle sizes commonly being handled by particle size distribution analyzers, it also handles particles of up to two millimeters in diameter-over twice the conventional maximum size.

Particle Size Analyzer uses a laser beam to analyze particle size. It can analyze particle sizes from 10 nm to 3 mm, or in a particle size range of 300,000 times the smallest measurable size, at a high accuracy of ±0.6%, within one minute. Since the high performance, this analyzer will yield high-accuracy measurement data in the fields of quality control and R&D. It is widely used in the chemical industry for performance improvement, R&D of synthesis method, quality control for plastics, pigments, adhesives, polymers and other materials.

Simultaneous Thermal Analyzer was designed to perform simple yet complex thermo gravimetry/differential thermal analysis (TG/DTA) of organic materials such as polymers and inorganic materials such as metals and ceramics simultaneously. The important features are the device is provided with improved temperature tracking, it has optional mass flow controller unit, it has built-in option control function for smaller space etc.

The Open Path Gas Analyzer EM27 is a broadband infrared detection system for remote sensing of hazardous atmospheric compounds. The system performance allows real-time field screening analysis (analysis less than 1 s). The lightweight system includes an infrared radiation analyzer based on the proven Bruker RockSolid™ interferometer. An internal calibration source provides self-test and self-calibration for radiometric measurements. Due to the novel design of the sensor module, the system is resistant to mechanical shocks, vibrations and temperature extremes. It is hardened for field operations in harsh environments. The Bruker EM27 features: - Easy handling - Robust and compact design - Low weight - Minimal power consumption - Fast measurement and analysis time In order to cover a large range of field application purposes, EM27 has two different system configurations with different sensitivities: Passive mode uses the natural infrared radiation signatures of chemical agents. Active mode detection uses the transmitted light from an active infrared source.

LUMOS is a fully automated stand-alone FT-IR microscope. It combines best performance for visual inspection and infrared spectral analysis of micro samples with highest comfort in use. Due to the motorization of all moveable components including the ATR-crystal, the LUMOS provides an unmatched high degree of automation. All required changes of hardware settings as well as the complete IR-measurement procedures are performed fully automated – even in ATR-mode. The intuitive software guides the operator step-by-step through the process of microscopic sample analysis. At each step the user interface only provides the appropriate functions to proceed. The measurement results in a single file including visible images, spectral data and sample information. For evaluation and visualization of the microscopic data the software provides powerful and intuitive Chemical Imaging functionality. Although the LUMOS is designed to be operated by non-experts for routine applications its exceptional sensitivity makes it also very suitable for high demanding applications. - Stand-alone FT-IR microscope with full automation - Highly comfortable and easy in use - Motorized ATR crystal (ATR = Attenuated total reflection) - Fully automated measurement in transmission, reflection and ATR mode - Large working distance; allowing ample space for sampling - Outperforming quality in both IR and VIS range - Space saving footprint

If you need a FT-IR spectrometer that can rapidly identify, quantify and verify your routine samples, TENSORTM is the right tool for your laboratory. It combines the highest performance and outstanding flexibility with an intuitive and easy to operate interface. High Performance TENSOR is designed for today’s laboratory requirements. It combines easy operation with highest instrument performance and affordability. TENSOR provides high sensitivity performance with the permanently aligned, high throughput patented RockSolidTM cube corner interferometer. Unlike a conventional flat mirror interferometer, cube corner's optically eliminates alignment errors. Easy to Use Customizable workspaces, easy measurement mode and wizards to guide you through setup of analytical methods are standard in OPUSTM software. All manipulation and evaluation routines are designed for multiple file operation. These factors make learning the software and the operation of the instrument so easy that even untrained personnel can operate a TENSOR series spectrometer. Bruker Artificial Intelligence Network The TENSOR series automatically recognizes optical components and sampling accessories. Component exchanges (like source, beamsplitter, detector, or laser). All relevant parameters transfers to the software for the user to immediately start a measurement. The TENSOR utilizes the Online PerformanceGuardTM to ensure all optical components, automation units accessories...