Centrifugal Pumps transfer pumping fluids with high efficiency suitable in dairy, beverage, pharmaceutical
You Are In: Home / Equipment Categories / MRO Equipment / Centrifugal Pumps

centrifugal pumps Suppliers

Endura Pumps

Endura Pumps are Group I & Group II ANSI-Dimensional Magnetically-Coupled (MC) centrifugal pumps. These pumps are designed to meet the demanding needs of the chemical processing industry and will also handle many challenging pumping applications, such as those which require dry-running, pumping slurries or high-temperature demands. The pumps cover flows up to 770 GPM and heads up to 420 ft. They are available in 316 Stainless Steel constructions and with flanged port configurations.

Liquiflo Equipment Co.

443 North Avenue, Garwood, NJ 07027, USA, Union, UNITED STATES

UNITED STATES UNITED STATES

Endura Endura
NS Series Thermoplastic Pumps

NS Series Thermoplastic Pumps are injection moulded, horizontal, side discharge, back pull-out, volute casing type, single stage, end suction horizontal centrifugal pumps. NS Series pumps are specifically designed to pump low specific gravity chemicals; best suited for finishing, electroplating, filtration, scrubbing, transfer and generic chemical applications. Its Max flow rate is up to 30M3 and has head up to 30 metre.

Soltech Pumps & Equipment Pvt. Ltd.

105-107, 1st Floor, Pooja Complex, 22, Veer Savarkar Block Shakarpur, Vikas Marg, Metro Pillar No. 59, New Delhi - 110092, Delhi, India, New Delhi, INDIA

INDIA INDIA

NS NS
Chemical Process Pumps-NZ Series

Chemical Process Pumps-NZ Series provides the most economical, combinatorial design which simplifies maintenance, reduces inventory, is able to give a near constant head for a wide flow range. NZ pumps are injection moulded, horizontal, side discharge, back pull-out, volute casing type, single stage, end suction centrifugal pumps. NZ Series pumps are specifically designed to provide optimum pumping solutions with reduced life cycle cost for all chemical applications. The specifications are it has head upto 50 meters, it has flow upto 50 m3/hr and further the material of construction is GFR-PP, PP, PVDF.

Soltech Pumps & Equipment Pvt. Ltd.

105-107, 1st Floor, Pooja Complex, 22, Veer Savarkar Block Shakarpur, Vikas Marg, Metro Pillar No. 59, New Delhi - 110092, Delhi, India, New Delhi, INDIA

INDIA INDIA

Chemical Chemical
Mechanical Seal Centrifugal Pumps

Mechanical Seal Centrifugal Pumps is composed by a static ring and a rotating ring placed on the pump shaft which is directly coupled to the motor shaft. The two surfaces sliding together need to be lubricated and the seal lubricant is the liquid itself that is being pumped. The features are the thermoplastic pumps are made in PP or PVDF, it has capacity up to 58 m3/h and further has head up to 38 mlc. It is widely used in chemical, petrochemical, pharmaceutical industries and its typical applications include in high corrosive liquids, liquids with solids etc.

GemmeCotti Srl

Via A. Volta 85/A, 20816 Ceriano Laghetto MB, Italy, Ceriano Laghetto, ITALY

ITALY ITALY

Mechanical
MPN Series Normal Priming Centrifugal Pumps

MPN Series Normal Priming Centrifugal Pumps have exceptional chemical resistance against strong acids and bases. In the MPN series, the hermetically sealed magnetic coupling comes together with an exceptionally reliable design and highest quality materials. This ensures a safe operation even with the most corrosive and hazardous chemicals. It is a normal priming, magnetically coupled centrifugal pumps. The specifications are it has max. output rate 400 l/min (106 US-gpm), it has max. discharge head of 32 m (105 ft) and further the motor power is 0.18-3.0 KW (0.25-4.0 HP).

Schmitt-Kreiselpumpen GmbH & Co KG

Einsteinstr. 33, D-76275 Ettlingen, Germany, Ettlingen, GERMANY

GERMANY GERMANY

MPN MPN
MDN Series Normal Priming Centrifugal Pumps

MDN Series Normal Priming Centrifugal Pumps are a normal priming, magnetically coupled centrifugal pump. In the MDN Pump Series, the motor power is transmitted contact free and abrasion-free with a magnetic coupling through the closed housing wall (“Slot-pot”) to the pump impeller. An encapsulated counter-magnet is built-inside the impeller. Therefore, a rigid shaft passage is not necessary. The MDN Pump Series is particularly suitable for toxic or environmentally hazardous media. A small amount of gas in the liquid can also be transferred without disrupting the liquid flow. The specifications are it has max. output rate 140 l/min, it has max. discharge head of 14m, it has motor power 0.55 KW and its material of construction is PVDF.

Schmitt-Kreiselpumpen GmbH & Co KG

Einsteinstr. 33, D-76275 Ettlingen, Germany, Ettlingen, GERMANY

GERMANY GERMANY

MDN MDN
High speed single stage centrifugal pumps

High speed single stage centrifugal pumps are used in oil refining, energy, inorganic chemistry, oil and gas as well as in the metallurgical and food industries. Its important features are it has compact size, its capacity is up to 250 m ³ / h, its head is up to 1,921 m, its operating temperature is -130 ° C to +340 ° C and its power is up to 315 kW. Further the diffuser and pump shaft revolutions are created with optimum performance in accordance with customer specifications.

ENCE GmbH

Hostattweg 2, CH-6052, Hergiswil NW, Schweiz, , SWITZERLAND

SWITZERLAND SWITZERLAND

High High
Centrifugal Pump

Centrifugal Pumps are of highest quality construction, manufactured from AISI 304/316. The important specifications are it is available with 1440 & 2800 RPM, it have the capability to generate upto 80m head and capacity upto 60m3/Hr, it is available with 0.5HP to 75HP 3Ph, TEFC induction motor and further the pumps can work under vacuum. These pumps are widely used in Chemical processing, Pharmaceutical industry, Food processing industry etc.

SSP PVT LIMITED

13 Milestone, Mathura Road, Faridabad, Haryana., , INDIA

INDIA INDIA

Centrifugal Centrifugal
Centrifugal Self Priming Pump

Centrifugal Self Priming Pumps are manufactured in variety of materials such as Cast Iron, Stainless Steel as per ASTM A 351/743 Gr. CF8, CF8M, Carbon Steel / WCB, Bronze etc. The features are it has capacity up to 250 M³/Hr, it has TDH up to 34 MLC and further it has delivery size up to 150 mm. It is widely used in industries such as pharmaceuticals & chemical, pulp & paper industries, dyes & intermediates etc.

SMS Pumps & Engineers

195, PUSHPAK INDUSTRIAL ESTATE, (OLD NIKA TUBE COMPOUND) PHASE-I, GIDC, VATVA AHMEDABAD-382445 (Gujarat-India ), Ahmedabad, INDIA

INDIA INDIA

Centrifugal Centrifugal
Centrifugal Vertical Submerged Pump

Centrifugal Vertical Submerged Pumps are manufactured in variety of materials such as Stainless Steel as per ASTM A 351/743 Gr. CF8, CF8M, Carbon Steel / WCB. The features are it has capacity up to 250 m³/Hr, it has temperature up to 350° C, it has TDH up to 95 MLC, it has working pressure up to 20 Bars and further has delivery size up to 100 mm. It is widely used in Pharmaceuticals & Chemical, Dyes & Intermediates, Starch Industries etc.

SMS Pumps & Engineers

195, PUSHPAK INDUSTRIAL ESTATE, (OLD NIKA TUBE COMPOUND) PHASE-I, GIDC, VATVA AHMEDABAD-382445 (Gujarat-India ), Ahmedabad, INDIA

INDIA INDIA

Centrifugal Centrifugal
12345...8

www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X