centrifugal pumps Suppliers

PPC-Series Polypropylene Centrifugal Process Pump is designed to suit extremely corrosive duties in process & chemical industries. It is less expensive and most ideal pumps than other pumps like as SS & Alloy metals. Its application include in handling of HCL-30%, diluted H2SO4, NaoH-48% etc. It is also used for transferring acids, alkalies, corrosive chemicals etc. It is also used fot scrubbing of corrosive gases like C12, Br2, F2, I2, SO2, SO3, CO2, NH3 etc.

PCF-Series Centrifugal Chemical Process Pump are Horizontal, Single-stage, Volute casing pumps. The design permits dismantling of the complete bearing unit towards the drive end, without the pump casing having to be disconnected from the piping. If a spacer coupling is used it is also unnecessary to disconnect the motor. The range comprises 32 pump sizes: with the max. Interchangeability utilized, these are covered with only four shaft sizes. For a given shaft size, shaft seal, impeller nut and bearings are interchangeable. Either soft Packed gland or mechanical Seal can be used as per liquid to be handled.

Stainless Steel Process Centrifugal Pumps are widely used for caustic transfer, acid unloading etc. The features are it provides supreme execution, it has longer utilitarian life and further it has exact built. It has better surface finish & back pull out design and further the accurate alignment of impeller to casing provides maximum hydraulic efficiency. The specifications are it has temperature up to 16 degree c and power up to 80 hp.

Polypropylene Horizontal Centrifugal Pump is provided with mechanical seal / gland packing arrangement covering all of the chemical industries. These pumps give customers unusual protection against corrosive & abrasive. All the wet-end parts are in solid moulded construction to with stand corrosion and erosion. The bearing bracket is made from heavy-duty graded casting coated with anti corrosive paint. It has reliable fixing of impeller on the shaft by direct thread and further is centrifugal quiet, vibration free. Its application include in phosphoric acid plants, caustic soda plants, rayon plants etc.

Back–Pull Out Centrifugal Pumps are ideal for pumping clear or slightly turbid water, Non-aggressive liquids. The pumps are used for Pumping Brine, Alkaline Solutions, Light Petroleum products, Benzene, Solvents etc. These Centrifugal Pumps are Horizontal Single Stage Volute Casing Pump with top centerline discharge design. Back-pullout design, enables to remove the rotor assembly without disturbing the pipe lines. The direction of rotation of all pumps are clockwise direction from drive end. And also available with gland packing and mechanical seal type design.

Chemical Process Centrifugal Pumps are used for pumping of Corrosive & Abrasive Chemicals, Hydrocarbons, Volatile liquids in Chemicals, Petrochemicals, Pharmaceuticals and Process Industries. Centrifugal Pumps are Horizontal, Single Stage, Volute Casing Pumps, with end suction, Top centerline discharge design. Back-pullout design enables to remove the rotor assembly without disturbing the pipe lines. If a spacer coupling is used it is also unnecessary to disconnect the motor. The feet at bottom transfer residual pipe stress by the shortest possible route the base plate & foundation.

Centrifugal Filter Press Pumps are ideal for filter press applications in Dyes, Intermediates, Chemicals, Textiles, Ceramics etc. It is also used in loading, unloading of chemicals, light petroleum products, transferring of zinc & magnesium sulfate etc. It is provided with suction design couple drive pump, semi-open type impeller design to handle slurries with solids, it has side suction & top discharge connection and further it has least leakage due to gland portion on suction side.

Centrifugal Pumps are designed to increase the pressure energy of a liquid. The pump essentially consists of an impeller powered by a motor. The rotary motion of the impeller develops a vacuum pressure, which helps in suction of liquid into the eye of the impeller. Due to the kinetic energy of the rotating impeller, a centrifugal force acts on the liquid, throwing it away from the center of the impeller. The blades are designed carefully to suit the application and to deliver with minimum losses to improve the efficiency of the system. The involute casing used for housing the impeller blades serves the purpose of developing a positive pressure head. These pumps are ideal for pharmaceuticals and allied industries for transfer of liquids with low viscosity. The centrifugal pumps are ranging from 0.5 HP to 5 HP with S.S. 304/S.S. 316 MOC.

Centrifugal Process Pumps are widely used in chemical and petrochemical industries, handling hydrocarbons, volatile fluids, acids, alkalies, solvents, cold and hot water applications. The pumps are horizontal single stage with closed/semi open impeller, back pull out design, generally conforming to API-610. Its design standard confirms to DIN 24256, ISO 2858.

Centran TMP pumps are centrifugal, horizontal axis, and close-coupled with the bodies built entirely of reinforced thermoplastic polymers. The internal components are ceramic oxides, HD carbon, and fluorinated elastomers: which mean any contact of metallic parts with the pumped fluid is avoided. This combination of materials was correctly chosen to obtain the best performance.