chemical industrial automation Suppliers

Automated Task Tracking System is an automated system that supports OSHA process safety management requirements, manages and documents task completion, balances the workload among operating crews and shifts, and schedules timed-based preventive maintenance.

ProPanel Industrial Operator Workstation is sealed and shielded against dust and liquids, shock and vibration and EMI/ RFI. Its low-power design ensures longer MTBF in temperature extremes.

The Triton TR8 is a nephelometric sensor designed for analysis of turbidity and suspended solids in water and wastewater. The Triton TR8 uses an optical method for determining the turbidity, a light beam is directed into the sample where it is scattered by suspended particles in the water. It has self monitoring diagnostics along with a Factory Calibration stored in its memory that assures trouble free service. The TR8 Analyzer digitally communicates with the sensor and provides a 4-20 mA output and alarm relay.

The Model 2122 Cooling Tower Control System (CTCS) is an integrated system designed to control the acid feed, blow down and inhibitor/biocide feed to a Cooling Tower. Acid feed is controlled via pH, blow down is controlled via Conductivity (TDS) and inhibitor is fed on a user selectable timed basis. Both the period and dose time are easily configured by the user.

The Model 61 Automatic Boiler Blowdown Control System provides a reliable solution for the continuous control of the surface blowdown rate for commercial and industrial boilers. All system components, except the sample system, can be supplied in carbon steel, NEMA 4 cabinet.

The Hydra Nitrate Sensor is designed to monitor the nitrification process directly in the aeration basin or clarifier of a Waste Water Treatment Plant. The Hydra uses ISE technology to measure the Nitrate and Chloride. Compensation for the chloride ion interference on the nitrate electrode is preformed automatically in the Hydra C22 analyzer. Also available with an optional pH sensor.

FCA-22 Free Chlorine Analyzer provides on-line continuous measurement of free chlorine in most aqueous environments. The design criterion for the FCA-22 was high accuracy with a minimal maintenance requirement.

The CA-6 Series Analyzers are a family of online sequential sampling analyzers that use Colorimetric or Ion Selective Electrode (ISE) technologies to perform ananalysis. The analyzers can be configured to perform most colorimetric or ISE-based laboratory analysis that use up to four reagents.

Triton DO8 optical dissolved oxygen sensor combines the high technology of Fluorescence Quenching with a rugged, easy to install design. The DO8 provides the best solution for long term measurements in aeration basins, aquaculture and all types of environmental water.

The T23 Series Smart Transmitter is a loop powered two-wire process transmitter that has been designed and manufactured to provide liquid process measurement and control in its simplest form. A choice of measurement parameters include: pH, ORP, Specific Ion, Dissolved Oxygen, Conductivity and Resistivity. The economical T23 Transmitter can be installed, wired, calibrated and ready to use in minutes.