compressors Suppliers

Industrial Thermo Compressor is appreciated for its 15%-20% of steam consumption. Available with a wide assembly of motive gases and pressures, these products are known for rendering an unusual degree of flexibility. Its important features are it is resistant to fire, it is rust proof, it has high strength and it is cost effective in nature. It is widely applied in industries such as Chemical, Petrochemical, Pharmaceutical, Paper etc. Its material of construction involves Titanium, Teflon Lined, Impervious Graphite and various other exotic materials according to different industrial applications.

High Performance Thermo Compressor are used in wide range of processes to save energy. They compress low pressure steam to usable pressure levels and thereby reclaim the heat energy in the low pressure steam, which otherwise would have been wasted. The important advantages are it has no moving parts, it can be installed in any position, it is possible to mix dissimilar gases and it has low initial cost and maintenance. Its application area includes industries such as Chemical, Paper, Petrochemical, Pharmaceutical etc.

Two Stage Medium Pressure Compressor consists 2 or 3 cylinders. First stage consists of single stage cylinder called low pressure cylinder is always larger in diameter than the second stage or two stage high pressure cylinder. The atmospheric air sucks into LP Cylinders through inlet filter & valves and passes to HP cylinder through inter cooler systems and HP inlet valves. The air is for higher pressure by HP cylinder and then delivered it to final destination. The highly efficient inter cooler systems provide maximum heat dissipation between stages, resulting in more air per horsepower and less trouble from carbonization. These compressors are suitable for applications where air pressure is required up to 17.5 kg/cm2g (250 psig). It is widely used in Chemical plants,Pharmaceuticals etc.

Ingersoll Rand Centac C310MX3-4C1. Flow capacity 10,000 cfm. Complete with 6.6KV-1 800 KW ABB Electric Motor.

Diaphragm Compressors provide non-contaminating, leak-tight compression of any gas. They are especially suited to applications requiring complete gas isolation from the external environment. High compression ratio and high pressure capabilities have resulted in them being used for specialist applications in the chemical, petrochemical, nuclear and industrial gases industries. Its key features are it has compact design, its gas cleanliness is maintained and it has easy maintenance operations.

HD Reciprocating Compressors are the natural choice where uninterrupted performance is vital. The high-power C-series reciprocating compressors covering range is from one to 24.8 MW. It is used to meet the demands of process-critical applications in the oil, gas, chemical and refining industries. The important features of the compressors are it has low operating costs and it is highly reliable.

Industrial Oxygen Compressor is coated with rust-proof paint and these products are highly appreciated for their features like smooth & noiseless operations, low maintenance cost and longer functional life. These oxygen compressors are designed in accordance with quality principles and is able to eliminate even a minute flaw during production. The offered range of these products find their wide applications in various industries like Chemical, Petrochemical, Pharmaceutical, Air & gas etc.

Overhung compressors are mainly used as boosters in petrochemical application. The single-stage overhung configuration is simple and easy to maintain. Almost all gases can be handled by this type of compressor with appropriate construction materials and seal systems. The single-stage overhung compressors are mainly used in the petrochemical industry for recycle in polypropylene, polyethylene and ethylene oxide plants, as well as for natural gas boosting. The blower compressor is a low-pressure design typically used when a tough process gas application requires a relatively high flow of gas with a low pressure ratio.

Diaphragm Compressors range in size from 3 hp(2 kW) to 250 hp(186 kW). Its discharge pressures range is from 50 psi to as high as 60,000 psi (4,100 bar). The compressors are used in virtually every industry in which high-purity, rare, or hazardous gases are utilized. Some specific diaphragm compressor uses include feedstock gases for chemical, petrochemical and pharmaceutical industries and pumping gases such as Argon, Butane, Carbon Dioxide, Carbon Monoxide, Tetrafluoroethylene, Ethane etc.

Jet Compressors are a type of ejector that use a jet of high-pressure gas as an operating medium to entrain a low-pressure gas, mix the two, and discharge at an intermediate pressure. Gases can be steam, air, propane, and others. Jet compressor is used when both motive and suction gases are steam. They are used when pressure suction or discharge conditions vary and it is necessary to control discharge pressure or flow. Jet Compressors have no moving parts. They can be installed in any position. Due to velocities involved, good mixing of dissimilar gases is obtained. Its applications include handle of liquefied petroleum gases and air for gas, electric, and chemical industries.