cooling towers Suppliers

Cooling System based on natural cooling principle is a revolutionary system essentially used to cool large quantities of hot water with an approach of 1 deg. C to wet bulb temperature, making conventional cooling towers / spray system obsolete. It finds application in all types of process plants & power industries where cooling water plays an important role in the process. It induces water to intensive atomization where water particles are sub-divided to around 5 microns. The atomized particles shoot out of CREATORS at an immense speed and rise to a height of 5-6 meters. This ensures extensively large surface area for a longer interval and at high velocity providing mist formation. Surface evaporation is very fast, faster than the time needed for reaching equilibrium.

Non-Filler Cooling Tower is widely used in tanning, foaming, power generation, steam turbine, aluminum processing, air compressor, industrial water cooling and other fields, the most used for air conditioning cooling, freezing, plastic chemical industry. It utilizes the contact of water and air to disperse the waste heat generated in industrial or refrigerated air conditioning by evaporation. The advantages are it provides high performance, efficient running, it is energy saving, it has long maintenance of service life etc.

Wooden Cooling Tower are available in induced draft cross flow & induced draft counter flow design. Water handling capacity ranges from 45 M3/hr. to 5000 M3/hr. per cell capacity. Fan diameter varies from 1500 mm to 10000 mm. Different models have different Air travels, Fill height, Fill pattern, Fan diameter, etc. in cross flow design and varied Fill height, Fill design, etc. in counter flow design.

FRP Cross Flow Cooling Tower are widely known for its dependability and high performance and readily adaptable for any type of water-cooling application. These cross flow cooling towers are manufactured with qualitative grades of FRP, PVC and MSHDG and SS supporting structure that makes them resistant from the chemicals and corrosion.

Aftercoolers designed to meet varying requirements of cooling and drying compressed air or gasses.Models A 100, A200 and A3 00 are in-line aftercoolers with corrosion-resistant removable tube bundles. They are all available with optional moisture separators in diameters from 2" through 13" and capacities from 150 to 8700 SCFM.

Moving Bed Cooler has High cooling capacity and low space requirement.It is applicable for well pourable bulk products with an angle of repose <45º and a particle size <3mm.

Natural Draft Cooling Towers are inevitable for the economic generation of electricity under environmental aspects. The tower operates on the stack effect which causes the hot air in the tower to naturally draft. The necessary stack can be designed in various ways. The required air stream volume for cooling is exclusively produced by the stack effect. The unique economic advantage of natural draft cooling towers lies in their very low electric energy requirement this makes the operating costs minimal. The almost complete lack of moving parts allows for high operating reliability and minimal maintenance requirements and owing to the height of the warm air outlet point the surrounding area remains untroubled by effects of the cooling system. Its application include in Oil Refineries Plants, Chemical Plants, Petrochemical Plants, Thermal Power Stations etc.

Timber Cooling Towers are useful for chemical plants, air conditioning plants, induction furnace, injection moulding machine, chilling plants, oxygen plants etc. These towers are available as bespoke designs to suit an existing concrete basin or special site layout. The heat transfer surfaces is either film flow or splash flow plastic as dictated by water analysis of the circulating water. All towers are designed in accordance with OHSAS demands and supplied to quality assurance programmes. The features are 95% of the timber material that is used is Pinewood and further all the steel material is galvanized for anti corrosion purpose.

Square Cooling Tower are manufactured using computer based design techniques. In the range of square cooling tower, hot water to be atomized is ejected through the nozzle and thoroughly mixed with air which provides resultant better performance. The main advantages are it has no hassles, it has no moving parts and the nozzles are made of virgin materials. Further the drift eliminators are made out of PVC honey comp structure in construction packed tightly above the nozzle area. It is widely used in chemical industries, dairy and food processing industries etc.

FRP Round Bottle Type Cooling Tower are light in weight and can be easily installed on roof without any special reinforcement. These towers are provided with a direct driven axial fan, which ensures that the system is free from problems faced with belt & gear drives. The main features of this tower include less air resistance to water, saving in operational costs, resistant to water borne bacteria and organisms and light in weight and low power consumption. It is widely used in chemical industries, industries heat process, oil refineries, food processing industries etc.