detector Suppliers

SFD- Solids Flow Detector is an industrial grade instrument capable of providing a signal indicating flow/no-flow conditions of solids and powders in pneumatic pipelines, gravity chutes and feeders.This non-contact detector contains no moving parts or probes that can wear out or break off in the material flow.The detector uses low power microwaves to sense motion within the vessel or channel being monitored.

Quadset Refrigerant Gas Monitor is a 4-Point Centralized refrigerant Detection System. is designed to detect refrigerant leaks in enclosed areas. The Monitor utilizes a sophisticated NDIR sensor specific to any one of the commercially available refrigerants. It can monitor over a range of 0-1000ppm with a resolution threshold as low as 1ppm. The Quadset can monitor up to four locations in one of two modes of operation, diffusion or sample-draw. The Quadset is easy to install and maintain. It has a 4-line backlit LCD for refrigerant gas readings and LED indicators for relay output status. The LCD is also used for programming the system parameters via a removable keypad. Designed to act as a fixed in-situ safety monitor, the Quadset automatically operates the mechanical ventilation system of a facility upon detection of low levels of refrigerants, thereby protecting occupants, personnel and gas-sensitive goods and products. The standard Monitor has a 3-stage relay output configuration and a malfunction relay.

CEL Series Multigas Detection System centralized detection and control system can monitor up to 32 remote detectors via a 4-wire RS-485 daisy-chain communication link, reducing installation costs. While typically used for enclosed vehicular facilities where CO and NO2 (for Diesel fumes) are the gases detected, the panel can also be configured to monitor CO2, Propane, Methane, Gasoline Vapors and other toxics and combustibles, please consult the factory. Remote sensors can cover up to 10,000 sq. ft. each depending on the layout of the space. The CEL Series offers indicating lights that show the alarm status at all locations and an LCD display that shows the exact concentration for the selected gas at each detection point using PPM readout. The CEL Series comes with a removable keypad so that no unauthorized personnel can tamper with the programming of the system, an important improvement over competing systems that have a keyboard installed on the front of the control panel.

CEW Wireless Gas Detection System is centralized detection and control system can monitor up to 32 remote detectors via a wireless RS-485 communication link at 900MHz or 2.4GHz, reducing installation costs. While typically used for enclosed vehicular facilities where CO and NO2 (for Diesel fumes) are the gases detected, the panel can also be configured to monitor CO2, Propane, Methane, Gasoline Vapors and other toxics and combustibles, please consult the factory. Remote sensors can cover up to 10,000 sq. ft. each depending on the layout of the space. The CEW Series offers indicating lights that show the alarm status at all locations and an LED display that shows the exact concentration for the selected gas at each detection point using PPM readout. The CEW Series comes with a removable keypad so that no unauthorized personnel can tamper with the programming of the system, an important improvement over competing systems that have a keyboard installed on the front of the control panel. The CEW wireless gas detectors have a sensor and battery life span of two years, and are easy to service in the field when required.

The high intensity LED clusters and panel warning lights pinpoint the hazard by flashing rapidly. Linked Detectives also go into alarm mode, but until they detect the hazard locally, they flash more slowly. This allows workers to exit the area by the safest route. The alarm tones of Detective can be customised to suit every situation and an audiovisual confidence blip indicates safe working.

Uniset is a single-point stand-alone gas monitor for a number of toxic and flammable gases as well as oxygen deficiency. It utilizes state-of-the art sensor technology: electrochemical for toxic gases and oxygen; catalytic bead for combustibles.

The CEL Series centralized detection and control system can monitor up to 32 remote detectors via a 4-wire RS-485 daisy-chain communication link, reducing installation costs. While typically used for enclosed vehicular facilities where CO and NO2 (for Diesel fumes) are the gases detected, the panel can also be configured to monitor CO2, Propane, Methane, Gasoline Vapors and other toxics and combustibles

Pharma Metal Detector Metaltrap HS 30 is an Eddy current based digital metal detection system designed for Pharmaceutical industry for detecting metal contamination in tablets / capsules, preferably installed after Deduster. The system is designed and manufactured to meet the stringent requirement and hygienic standards of pharmaceutical industry. The features are it has extremely high detection system for all metals, it has 100 product memory, it is built in self diagnostic system on LCD display and further has digital control and signal processing. The area of application include in tablets, capsules, gel capsules etc.

Conveyorised Metal Detector Metaltrap SS30-CONV is an eddy current based Digital Metal detection system specially designed for Food and Pharmaceutical Industry for detecting metal contamination. The features are it provides extremely super sensitive detection for all types of metals, it has HMI display, it has auto product tracking, it has validation using prompt and further has statistical data with event time stamping. It can be also used in chemical industries.

Gravity Feed Metal Detector Metaltrap SS30-GF is an eddy current based digital metal detection system designed for Pharmaceutical, Chemical and Food Industry for detecting metal contamination in powder and granules. The rejection mechanism used is pneumatically operated Diverter type as it is full proof and allow product containing large lumps to be checked without problem of blockage. The features are it has extremely super sensitive detection for all types of metals, it has HMI display, it is provided with auto product tracking, it has validation using prompt and further has statistical data with event time stamping.