generators Suppliers

Nitrogen Gas Generator Equipment is an inert gas atmosphere generator & incorporates two sets of columns filled with carbon molecular sieves. Under pressure these columns retain all active molecules compounds present in air like oxygen, carbon dioxide and water with the exception of the inert gases like nitrogen & argon. The nitrogen gas can be produced onsite for direct use or can be stored in nitrogen storage tanks bottles or cylinders for intermittent use. It is widely used in chemical industries for applications such as reservoir blanketing,solvent blanketing, fuel storage, polymer production and solvent paint production.

PSA Nitrogen Gas Generators important features are the equipment adopts brand-newly-designed filling technique and service, its special bypass design ensures lower energy consumption and higher yielding results, it has imported pneumatic valve with original packaging guarantees the serviceability in a greater degree and further the computer-aided operation with the simple technical design makes for easy maintenance of the equipment. It is widely used in small-scale nitrogen demand of chemical industry, nitrogen protection and filling of injection solution, transfusion and oral liquid in pharmacy industry etc.

ZA4000-Zero Air Generator is suitable for gas chromatography. Ensuring ultra high purity grade zero air for combustion gas, this type of generator has a stable and lower baseline signal unlike traditional gas sources. Owing to its lower baseline noise, there is larger signal to noise ratio, enhancing the sensitivity or larger peak areas. The zero air generator is easy to operate, with no labor intensive monitoring involved. Its pressure capacity is from 4.0-7.0 Kg/cm2 and capacity of gas is 4000 ml/min at 6 kg/cm2.

Hydrogen Gas Generator CIT-GGH-300 are size compact, weight light, cost effective, energy-saving & environment friendly. High-purity hydrogen gas is produced by the electrolysis of water without adding any alkaline. The production rate is digitally controlled up to 300 ml/min. Each gas generator also feathers over-pressure protection for safer operation. The gas generators are ideal for material processing, heat treatment and gas chromatography analysis, etc. in research laboratory instead of using heavy and expensive hydrogen cylinders.

N2 & H2 Gas Generators eliminate the need for costly, inconvenient high pressure cylinders in the laboratory. Including integral oil-free air compressors as standard, the generators deliver a continuous stream of 99.999% plus pure nitrogen gas with a minimal residual Oxygen content without the need for secondary purification.

Nitrogen Generators require less maintenance and servicing as it has no moving parts. In this generator, an existing compressed-air supply is used whereas in other cases an integrated compressor or external silenced compressor is installed. Its salient features are it is cost effective, it has compact, lightweight construction using minimum floor space, it is provided with optional integrated compressor, it has low power consumption and maintenance-free operation, it is suitable for GC-MS, TOC, FID, DSC purging and many more applications and further has flow rates up to 200cc/minute at 99.9995% purity.

Combined Nitrogen Generator produces Nitrogen and Zero Air of GC grade purity sufficient for use with up to 2 GCs. It employs pressure swing adsorption technology to produce continuous supply of high purity gas. An oil free air compressor delivers filtered compressed air to a bed of Carbon Molecular Sieve and activated alumina. The adsorbent bed alternates between purification and regeneration mode. Oxygen, moisture and other contaminants are removed to deliver pure, dry Nitrogen gas for use.

Thermic Fluid Heated Steam Generators are used in the industries, as indirect heating appliances. The offered steam generators employ the petroleum-based fluids for heat transfer and constant temperature maintenance. The offered steam generators have an inbuilt pneumatically operated control valve, which regulates the flow of thermic fluid, inside the generator. The offered steam generators continuously monitor the system load, to operate on low and high fire settings. It has applications in various types of industries like chemical, pharmaceuticals, food processing, dairy, edible oil, textile etc.

PSA Oxygen Gas Generators is based on Pressure Swing Adsorption technology. The main ingredient of Oxygen Plant is ZMS (ZEOLITE MOLECULAR SIEVE) and ZMS is having indefinite pores on the surface, which adsorb the molecules of nitrogen, moisture and unwanted gases from compressed air. Oxygen gas, which is not adsorbed into the surface of ZMS comes out from adsorbed tower and collects in the surge vessel. It consists of two-adsorber tower, which is filled with molecular sieves. The adsorber towers are interconnected with change over control valves, controlled by sequence timer with a standard time cycle. After every certain time cycle adsorbed tower, automatically swings and oxygen gas is produced continuously. The maximum oxygen purity level is 93-95%. Its application area includes Chemicals and Petrochemicals industries, Glass Industries etc.

PSA Nitrogen Gas Generators are economical, reliable, durable and user friendly. The main ingredient of Nitrogen Plant is CMS (CARBON MOLECULER SIEVE) and CMS is having indefinite pores on the surface, which adsorb the molecules of oxygen, moisture and unwanted gases from compressed air. Nitrogen gas, which is not adsorbed into the surface of CMS comes out from adsorbed tower and collects in the surge vessel. The main advantages of Nitrogen plant are it is fully automatic and hence no special operator is required, it consists of self contained unit and is ready to install and further its capacity is 1Nm3/Hr to 1000 Nm3/Hr. Its application areas includes Chemical Industries, Pharmaceutical Industries etc.