heaters Suppliers

Oil/Gas Fired Thermic Fluid Heaters are designed for maximum efficiency, using a variety of liquid and gaseous fuels. It is designed with fuel flexibility in mind and can fire a wide range of heavy oils, light oils and gases. It allows high process temperatures at low operating pressures. Its capacities range from 0.2 million kcal/hr to 2.5 million kcal/hr and its temperature is up to 350ºC. The special features are it has high capacity heating system, over-bed & under-bed fuel firing systems can be incorporated and further it has large in-bed and convective heat transfer area.

Thermic Fluid Heaters are a substituent against steam or electricity for the processing of heating applications. Herein, pressurized hot water or steam is used instead of electricity. Moreover, the temperatures up to 300C can be obtained with an accuracy of +-1%. These are applicable in following industries such as chemicals, textile, food industry, metal finishing etc.

Steam / Thermic Fluid Heated Air Heaters are used for air heating in commercial applications and pharma equipments like – Fluid Bed Dryers, Tray Dryers, Spray Flash Dryers etc. The equipments are used for heating air by using steam or thermic fluid as the heating medium. Finned tubes are used as the heat transferring media to the air. Many combinations of finned tubes can be used as per the requirement, depending on temperature and application. Equipments are sized as per the air volume to be heated mainly the material of construction are mild steel and stainless steel.

Thermic Fluid Heater is suitable where greater temperature is required and is extensively demanded by chemical, pharmaceutical and many more industries. This fluid heater is appreciated for its application specific design, easy maintenance, simple installation and long working life.

This component may be installed horizontally vertically. Heater can be insulated by non flamable insulation, otherwise sufficient distance must be kept to other components. Flow rate can be adjusted by restriction at inlet side, outlet side must never be closed with valve. Water connections must be securely fastened.

Air Preheater is a device used in steam boilers to transfer heat from the flue gases to the combustion air before it enters the furnace. Air Preheater recovers the heat from the boiler flue gas and increases the thermal efficiency of the boiler. The Flue gases are sent to the fuel gas stack at a lower temperature. It allows control over the temperature of gases. Its material of construction is Incoloy, Stainless Steel, Inconel. Its application include in Oil & Gas Extraction, Chemical, Food Processing etc.

Silica Cased immersion heaters are best suited where contamination of the liquid due to metal Sheath Material is a major problem. The pure fused silica sheath is highly resistant to corrosion, thereby eliminating the possibility of upsetting the chemical balance of solutions by metallic contamination. The important features are its lengths are available in 12”, 18”, 24”, 30”, 36” etc. and its operating voltage is 230 V AC to 440 V AC and its wattage is up to 4 Kw.

Porcelain Heaters offer a large heated area to the Gases, liquids or semi-solids to be heated when inserted into a thermo well. A Feature of this type of heater is that it may be removed for repair or replacement without draining the contents of the vessel. The sheathing Material may be M.S, S.S or Titanium or with clamp late, depending on the application. Its important features are its operating voltage is 230 V AC to 440 V AC and it is suitable for horizontal / vertical operation. Its application area includes alkaline solutions, anodizing and plating baths, in phosphoric acid, chromic acid etc.

Spray Dryer Heaters made available are well recognized for offering optimum functional support in varied industrial applications. With the design and construction standards of these heaters in accordance with standards followed internationally, the company make these available in quality and performance tested components as well as other well-defined parameters so as to ensure in them optimum performance values. Its applications include in drying of pigments, finding usage in processing needs of Chemicals, Plastics and Powders and further it can be made available in standard as well as customized configurations.

Chemical Tray Dryer Heater offered is backed by latest technology support and provides for optimum functional working interface in given industrial processes. Featuring use of precision designed & developed components and machinery parts using stainless steel metal support. The features are it has durability finish quality, it has reliable performance and further is easy to install interface. Its maximum temperature is 13 to 30.