pumps Suppliers

Duplex Syringe Pump are designed to deliver liquids at a constant flow rate and a constant output pressure. Fluctuations in the flow rate and output pressure are minimal. It is a type of positive displacement pump. Syringe pumps excel at injecting fluid at a volumetric flow rate (generally slow) without generating any pressure pulsations. Depending on seal design, syringe pumps are capable of pumping to very high pressures (up to 60,000 psig /4,100 barg). Barrel sizes range from 125cc to 1500 cc and can be built in accordance to customer specified materials, which are compatible to the process.The output flow rate can be adjusted to any desired value within a specified range. Flow rates can be entered via the operator inter-face. This flow control system is calibrated specifically to each pump.

Polypropylene Pumps are used in effluent treatment plants, scrubbing corrosive gases, and water jet ejectors. The specifications are it has capacity up to 120 M3 / Hr., it has head up to 50 meters, it has temperature up to 70° centigrade for P.P., it has up to 100° centigrade for U.H.M.W.P.E., it has up to 130° centigrade for PVDF and further has speed up to 3000 rpm. The features are it is suitable for higher working pressures, it has direct or gear drive, it has stable characteristics and further has minimum maintenance required.

Thermic Fluid Pumps are manufactured from best quality stainless steel and cutting-edge technology. Offered pumps are appreciated for their noise and vibration free performance, easy installation and high degree interchangeability. The pumps are suitable for both organic and inorganic fluids and used in oil refineries, paper, food, chemical, textile industries and sea water desalination plants. The features are it has low maintenance, it is easy to operate and further has longer service life. The capacity is up to 1200 m3/hr and the speed is up to 2900 rpm.

Magnetic Pumps are widely used for pumping of corrosive & toxic chemicals. These pumps are very special because they do not use any conventional standard seal type arrangements which are facing leakage problems & constant maintenance requirement round the clock. The pumps are sealless pumps therefore offering 100 % leakproof, low maintenance, easy to repair, low power consumption & simple pump design with wide spectrum of application and benefits include features like 100 % leakproof pumping.

Saturn-Fiberglass Reinforced Polyester Pumps are manufactured in FRP (fibre reinforced polyester) and do not need a protecting carcass or external frames to reinforce the structure. Peculiar design and the intrinsic resistance of the material of construction confer to these pumps mechanical resistance comparable to that of the major metallic alloys. Use of different formulations of epoxy vinyl ester resins, extend the spectrum of chemical resistance of these pumps that are adequate and resistant to a large number of corrosive and moderately abrasive medias. The pumps are in general in productive processes deploying chemicals.

TMB Light Duty Chemical Transfer Pumps features a single stage centrifugal impeller and magnetic drive. The TMB Range consists of 5 models which can deliver flows of 15-70 Litres per minute. This range is constructed entirely of glass fibre reinforced polypropylene and has outstanding chemical and mechanical resistance. What makes this range ideal for various applications are the compact dimensions, low noise and the absence of a seal. It is provided with 240VAC single phase 2 pole splashproof motor and has 0-60 DegC temperature range.

Polypropylene Chemical Process Pump is a horizontal single end suction standardized process pump. PP series process pumps are supplied with mechanical seal/gland packing arrangement covering 85% of chemical industries requirement. All pumps, shafts are fitted with sleeves of different materials compatible with the liquid handled. The specifications are it has maximum capacity 70 m3/hr, it has maximum head 38 mtr., it has maximum temperature 75 degree C and further has maximum speed 3000 rpm. It is used for transferring of concentrated HCL and further scrubbing of corrosive gases like Ci2, Br2, F2, So2, So3, Co2, NH3 etc.

TC Close Coupled Pump is capable of handling clean water, seawater, solvents, chemicals and other liquids with similar properties. The specifications are it has flow rates up to 300 l/sec, it has head up to 160 metres and further has temperature from -20 deg C to +130 deg C. The back-pull-out construction allows the pump to be dismantled without disturbing the suction and discharge pipework. Impellers are fully shrouded closed design, with double curvature vanes for optimum efficiency and good suction performance. Vortex design semi-open impellers are also available on some sizes.

ISF Heavy Duty Process Pumps are ideal for demanding applications handling water, chemicals and hydrocarbons at temperatures up to 140 deg C. Pumps are of modular construction and are available in a wide variety of materials including cast iron, steel, stainless steel, duplex stainless steel and titanium. The features are it has single stage impeller, it has back pull out design, it conforms to ISO 2858 dimensions, it has single mechanical seal, it has high efficiency hydraulic design and further has stable head-flow curves for parallel operation. It has discharge flange sizes 32 to 200 mm and further the maximum flowrate is 250 l/sec.

Magnetic Drive Chemical Process Pump can handle low density (1.25 pgs.) clear liquids, up to 90 degree C. The wetted component are made from high quality poly propylene, viton, teflon and ceramics. These pumps has no seal, no coupling, no leakage and light in weight. It is a simple and compact design and maintenance free. These are used for photo cine plants, filtrations system, photo processor, electroplating equipment, etching liquid circulation and pharmaceuticals industries etc.