pumps Suppliers

Series 500 "dia-Pump" Metering Pumps offer a variety of process control options, including electric stroke length control, pneumatic stroke length control and electric speed control.These are removable for cleaning without disconnecting piping.With capabilities of 80 gph simplex and 160 gph duplex, these pumps handle pressure up to 3000 psi and are adjustable through 100% of their operating range.

Series PZ Pulse Metering Pump is designed for injection of a wide range of liquid materials, including chemicals, nutrients and disinfectants.The pump operates on any single phase voltage from 94 VAC to 264 VAC.

Electronic Pulsed Metering Pump is designed for accurate, reliable injection of a wide range of liquid materials, including chemicals, nutrients and disinfectants.It is the first metering pump to operate at any voltage from AC90 to 264V and 50/60 Hz.

Flexible Impeller Self Priming Pumps features include self priming upto 3.5 mtrs, it has impeller and seal options, it handles viscous liquid, it handles soft/ hard solids without damage or clogging and further allows flow to be regulated by varying pump speed. The pumps are efficient & dependable for Acids / Alkalies, Oils, Chemical effluent, Inks, Dyes and Paint, Adhesives etc.

Chemical Process Pump are used in a wide variety of process applications and due to their high reliability they provide reduced operating costs. It is available in SS 304, SS 316, Cast Steel, Cast Iron construction. The pumps are available with mechanical seal or gland packing type.

Vacuum Pump is a device that removes gas molecules from a sealed volume in order to leave behind a partial vacuum. Dry type vacuum pump for suction capacity upto 300 lpm and maximum vacuum 650 mm Of Hg are available. Both total dry and lubricated vane type vacuum pump are available.

Chemical Process Pump With Priming Vessel are widely used in chemical process applications. Designed to increase efficiency and output, these pumps are highly demanded in market. The priming vessel is sized relative to the volume in the pump suction pipe and to keep the priming vessel manageable in size is therefore best suited for applications with small to medium flow rates and when suction lines are not too lengthy.

E4 metallic pump features the Elima-Matic air valve for non-stalling, anti-icing and lubrication.It delivers flows from 10-70 GPM.The E4 can handle solids to 0.1875" with ease. Available in aluminum, stainless steel, hastelloy, and cast iron to handle most chemicals.

AYUSH Polypropylene Pumps are well designed for handling of corrosive chemicals like acids, alkalis, solvents etc. The pumps are widely used in all chemical industries. The volute casing, impeller and back plate are of virgin polypropylene. Volute casing in top centre line discharge open type light in weight is provided for optimum performance and wide range of applications. The bearing frame is manufactured from heavy cast iron and having large oil reservoir. The shaft is made of Steel En-8 and protected from corrosive chemicals by providing suitable shaft sleeve. Shaft sleeve, mechanical seal & gland packing provided as per chemical composition of liquid or application.

AYUSH Chemical Pump Series AHPST/MT is widely used in the chemical industries. It is provided with sand cast / investment cast, twisted vane impeller of duplex stainless steel (CD4MCu) for better erosion capability. Seal housing controls vapor build-up and ensures adequate flow conditions to remove heat effectively. It incorporates many different seal designs with sufficient radial clearance. Oil seals are provided at both ends of bearing housing and further has corrosion allowance of 3 mm. Its size is DN 25 to 200 mm and its capacity is up to 700 m3 / hr. Its temperature is up to 200° C and pressure is up to 26 bar.