pumps Suppliers

Steam Jet Liquid Pump is a novel device used in elevating & conveying with simultaneous heating of wide range of liquids ranging from feed water to caustic solutions. The pump uses steam as primary fluid to pump liquids which is the secondary fluid. The kinetic energy of the steam is utilized to lift the liquid from the customer specified elevation. The steam enters the ejector through the nozzle and issues a jet into the mixing chamber. Initially, the steam jet and the liquid to be coveyed move as an annular flow. Mixing takes place gradually as the steam condenses but usually occurs suddenly at a condensation shock. The mixed fluid is discharged through a diffuser which is used for some further static pressure recovery.

Eccentric Single Screw Pumps find their place of applications in almost all the industries. Be it coal slurry or volatile chemicals, harsh abrasives or fibrous pulps, these pumps are preferred better as right choice. Whenever the pumping is found difficult, these pumps do their duty as per the user’s requirement. The specifications are it has capacity up to 275 m³/hr., the pressure stages are 6, 12, 18 & 24 Bar, the temperature is up to 150° C / 302° F, its viscosity is up to 30,000 cST and further solid handling capability is up to 7%.

Progressive Cavity Pump find their place of applications in almost all the industries. Be it coal slurry or volatile chemicals, harsh abrasives or fibrous pulps, these pumps are preferred better as right choice. Whenever the pumping is found difficult, these pumps do their duty as per the user’s requirement. The specifications are it has capacity up to 120 m³/hr., the pressure stages are 6, 12, 18 & 24 Bar, the temperature is up to 150° C / 302° F, its viscosity is up to 30,000 cST and further solid handling capability is up to 7%. The features are it has long life, closed or open cardan joints / pin joints and further has reversible flow direction.

Methanol Dosing Pump provides accurate & sophisticated dosing metering. The other features are it has fixed & variable output choice, it is leak proof in nature, it has compact, sturdy design & is long lasting, it has low power consumption, it has high efficiency, it has noiseless running, it is virtually maintenance free, it has in built versatility to suit any kind of liquids, it has abrasion resistant and corrosion resistant and further the pump performance confirms API 675 international standard.

Rotary Mini Pump have wide application in lubrication of Machine Tool, Press Tool, Chemical, Pharmaceutical, Textiles, Printing, Canning & Bottling, Plastic Processing, Moulding Machines. Other application relate to transfer of fluid, burning oil, hydraulic power packs, rotary filters as well as vehicle engine lubrication. The pumps are available in different sizes depending upon the discharge value in LPM at 1500 shaft RPM. These pumps are generally non-reversible i.e. by change of direction of rotation of pump shaft, suction and delivery ports get inter changed. Rotary Mini Pumps normally don't have built in relief valve. However if demanded, it can be built in relief valve. Its capacity is 0.5 to 40 LPM and size range is from 1/8" to 1/2".

XM Series Chemical Dosing Pumps are motor driven and the diaphragm is actuated by a gear drive. All the shafts are loaded on "Twin Bearing Support" (TBS) which results in precise & consistent operation. Moreover, wear & tear is minimal due to proper meshing of well lubricated worm shaft and worm wheel. Flow rate can be adjusted between 10% to 100% on the rated capacity against the rated back pressure by a stroke adjustment knob. The pump can also be automated to accept 4-20mA through a variable frequency drive.

XH Series Chemical Dosing Pump are motor driven hydraulically actuated diaphragm complying to API 675 Standard covering wide range of Capacity - 200 LPH upto 3000 LPH. The diaphragm is actuated by pressurizing the hydraulic oil in the hydraulic chamber. The drive is submerged in oil bath. Hence, wear & tear is minimal. Flow rate can be adjusted between 10% and 100% on the rated capacity against the rated back pressure by a stroke adjustment knob. The pump can also be automated to accept 4-20mA through a variable frequency drive.

PBO Series End Suction Back Pullout Pump is widely used in industries like chemical, petrochemical, pharmaceutical and bulk drugs, oil extraction etc. The specifications are it has capacity up to 400M³/Hr, it has head up to 100 Mt and further has temperature up to 350°C. It is available with suitable gland packing. Mechanical seal arrangement available upon request. Three shaft units cover complete range of pumps. Made of high tensil steel and accurately grinded all over.

Inline Pumps are used in food processing and chemical industries for watering purpose and these Inline Pumps are known for their Excellent performance, Sturdy design, Rust proof & Long lasting life features.

Sealless Magnetic-Drive Pumps are excellently suited for the requirements of the chemical industries, pharma industries, and numerous other industries wherein the loss of liquid is of atmost concern. With these types of pumps, liquid media of varied types can be pumped reliably and safely. Total containment of the liquid pump is achieved using a hermetically sealed can, which isolates the liquid from the surrounding environment, eliminating the need for mechanical seals. The magnetic drive pumps are therefore not only environment friendly they also contribute to improved safety in chemical and process plant environment.