pumps Suppliers

ACH ANSI Chemical Pump handles all chemical process requirements. Its application include in acids, alkalies, corrosive slurries etc. The specifications are it has capacity upto 600 M3/Hr, it has head upto 180 Mtrs, it has temperature upto 200°C, its casing pressure is upto 24 Bar and the pump size is 25mm to 200mm. The features are it has open impeller construction, it is conforming to ANSI B73.1, it has end section / top centre line discharge and further is provided with mechanical seal.

Lower Process Pump ZP 602 B are used for pumping liquid from lower pressure to high pressure. Manufactured from stainless steel 316 or 304 these hygienically cleaned process pumps have the capacity up to 8, 00,000 liters and lifting head of 100 meters. Excellent suction performance makes it possible to use these pumps even under unfavorable inlet conditions (Low NPSH). These are widely used in various industries such as dairy, beverage, winery, pharma, distilleries & service industry. The features are it has stainless steel investment casting CF8M/CF8 and has computer aided designed controller of impeller vanes for optimum efficiency.

FMI Valveless Metering Pumps have a unique design in which the piston rotates as well as reciprocates thus eliminating the NRV’s in both suction and discharge. The piston and cylinder are made of high quality 99.99% pure alumina ceramic which gives them a life of almost 5 years. These pumps are very accurate and consistent with flow rates ranging from 0.12 ml/min to 2200 ml/min. These pumps can also handle viscous fluids and mercury.

MTA Series PFA-Lined Pumps provides superior chemical corrosion resistance making it compatible with mineral and organic acids, bases, alcohols, hydrocarbons and halogens.

Texel MET-80 Series Magnetic Drive Pump offer the safe handling of toxic or corrosive fluids. This sealless, plastic-lined pump provides leak-proof, corrosion-resistant performance and can accommodate chemical transfer applications requiring high purity.It has High-efficiency (no-slip) mag-drive design using rare earth magnets.

Series CFM-Seal less Magnetic Drive Pumps are ideally suitable for handling corrosive chemicals, toxic and fuming liquids, acids, electroplating chemicals, dyes, solvents, pharmaceutical etc. Its material of construction is SS, and its operating temperature is upto 100 deg C. The features are it is 100% leak-proof, it has no shaft seal, it has low maintenance and further has low downtime. The pumps are available in monoblock type only with Std TEFC motors and Flame Proof motors.

Series PCX–Process Pumps are horizontal centrifugal volute casing type process pumps with mechanical seal. It is highly reliable and sturdy design pumps for handling corrosive liquids. These pumps are ideally suitable for handling corrosive chemicals, acidic water with mild impurities, pickling plant chemicals, effluents and boiler descaling chemicals. Its material of construction is Filled Poly Propylene, PVDF (polyvinylidene fluoride) and its Operating Temp. is upto 70 deg C. It has capacity upto 100 m3/hr.

AB Series Barrel Screw Pump is driven by vertical flange mounted geared or flanged motors. It is available in mild steel or stainless steel material of construction with rotating parts to suit duty conditions. Shaft sealing is done by soft gland packing / mechanical seal. The features are it works on the unique progressive cavity principle, it has simple in design and easy to use, it has positive displacement and further its low internal velocity of fluid within the pump ensures gentle handling of liquid minimising shear and erosion. Its capacity is 180 Cu.M/Hr and temperature is up to 200 Deg C and is widely used in chemical & process industries, pharmaceuticals etc.

AL Pumps are of cast iron construction with various metallurgy of rotating parts like Alloy Steel, Tool Steel, SS 304 and SS 316 while BL pumps are of complete SS 304 and SS 316 material of construction. Other various options of FRP / Ebonite lined housing with rotating parts in super alloys like Alloy 20, Hastelloy C, Hastelloy B and Titanium are available for highly corrosive applications. Shaft sealing ensured by soft gland packing / mechanical seal. Torsion free metal bonded stator and double sealed universal joints as pin & bush joints or special designs like gear joints or cardon Joints as per customer requirements for longer service life and improved efficiency results in trouble free performance of the pumps. It is widely used in chemical and process industries, petrochemical and refinery industries etc.

Tonkaflo Multi-Stage Centrifugal Pump is a rotodynamic pump that uses a rotating impeller to increase the pressure of a fluid.They are are commonly used to move liquids through a piping system.