reactors Suppliers

The microreactor consists of a pre-heating line for two reagents, a mixer and a holding line for the mixed product. The mixing elements are very simply structured by means of "chicanes" (Design element "Type S"), which makes them especially suitable for use with precipitation reactions and suspensions. In this reactor the temperature is adjusted by means of an external thermostat by a simple "immersion" of the reactor. This avoids losses in the supply lines and more extreme temperatures can be achieved.

The reactors with integrated heat exchangers are connected via glass internal screws or hollow screws with clamping ring connection for the thermostat.They are stable under pressure up to 10 bar, greater stability as required is possible upon request.

The XXL reactor ST-01 is characterised by its compact construction design and robustness. It consists of three function levels: Adjust temperature - Mix - Adjust temperature. Three reagents (A1, A2, A3) are mixed without preliminary temperature regulation in a 3m long, temperature-adjusted mixing line of the type ST transferred to output P1 without time delay.

The XXL reactor KOE-01 is intended as a temperature-adjusted holding line, but it can also be used as a temperature-adjusted link between 2 different XXL reactors. It consists of the function levels Temperature regulation - holding - temperature regulation.

This fully temperature-adjusted microreactor permits the warming or cooling of the reagents to the reaction temperature before they are mixed into a single component. The mixing line consists of a micromixer of the type ST. The length of the mixing line totals 2000 mm (3ml inner volume). This makes this reactor especially suitable for heterogenous reactions. Furthermore, exsolution is prevented in the holding line which is extended to function as a micromixer.

With the XXL reactor ST-04 two reagents (A1, A2) can be temperature-adjusted and then mixed in a type ST mixer with a controlled reaction temperature. The product can be removed at three different outlets (P3, P2, P1) and so various delay times can be realised with the same flow rate. The outlets can also be used as inputs for additional reagents. It consists of three function levels: Adjust temperature - Pre-heat/mix - Adjust temperature.

The material used by the Little Things Factory is borosilicate glass. Microreactors of the HTM series are stable under pressure up to 10 bar; greater stability as required is possible upon request.

Chemical Reactors are highly demanded in the market for their affordable prices, optimum durability, fine finish & long service life and known for their Defect free, Anti corrosion, Best quality features.

Chemical Reactor is designed to maximize net present value for the given chemical reaction and is widely used in the chemical industry.

Industrial Reactor is used for chemical reaction of two or more chemicals. Industrial Reactor use high grade raw material procured form reliable vendors to fabricate the reactors. These are widely used in chemical and pharmaceutical industries.