scrubbers Suppliers

Packed Bed Scrubber is a wet type scrubber that removes soluble chemicals, fumes, and odors. Contaminated gas flows through a specially designed packing media that is wetted with re-circulated liquid. The liquid solvent absorbs the gas pollutant by physical or chemical means. A blowdown from the tank with makeup water addition removes contaminant products before they precipitate. Contaminants removed are H2S, HCl, HCN, NH3, SOx - SO2, SO3, SO4, Cl2, F2, Formaldehyde and many other. Its capacities ranges from 10 to 75,000 CFM with a single unit with efficiencies up to 99.99%.

Stainless Steel Spray Tower are very effective for large volume of flue gas with low concentration of pollutant. They are low-pressure scrubber with low power consumption compare to other types of scrubber. The spraying system can be designed in single or multistage to increase the efficiency. They can be manufactured in mild steel, FRP coated and stainless steel as per application and requirement. They have been used effectively to remove large particles and highly soluble gases. The pressure drops across the towers are very low - usually less than 2.5 cm (1.0 in) of water, thus, the scrubber operating costs are low.

Venturi Scrubbers are high performance system which can reduce the contamination level of flue gas up to 99%. They can remove both particulate matter and gaseous pollutant. The flue gas is scrubbed at high speed and pressure at the Venturi and gas velocity is dropped at the Separator. The separator can be converted to spray tower in case the concentration of pollutant is very high. The material of construction of Ventruri is depended on the composition and temperature of the flue gases entering the system. When the flue gases are rich in SOx and NOx then the scrubbing process generates acid and consequently high-grade stainless steel such as SS-316 has to be used. They can be used for any industry where the concentration of particulate matter or gaseous pollutant is high.

Scrubber Venturi Type is specially designed to control pollution. In a Wet Scrubber, the pollutants are brought into contact with the cleaning liquid by spraying the liquid, or by other methods so as to remove the pollutants. It is widely accepted by the clients for its flawless quality. This can be many type depending up on application and requirement. Its applications include in Power Plants, Chemical, Pharmaceutical, Foundries, Cement Engineering etc. The features are it is long lasting, it has great strength, it is very durable, it is easy to install and further it has low maintenance.

Jet Venturi Fume Scrubber System is a device specially designed to scrub huge volumes of gases with the help of "Vena Contracta". There is sudden expansion and contraction near the venture throat where the velocity of the gas is very high and separation takes place which is known as Vena Contracta. The Motive fluid, generally water leaves nozzle in a hollow cone spray, creating a draft which draws the gases and vapors in to the moving stream where it is continuously scrubbed. Jet Venturi scrubber is highly efficient for the fume/ gas scrubbing. Its application include in Ammonia, Sulfur Dioxide, Nitric Acid, Hydrogen Sulphide, Chlorine gas scrubbing. These scrubbers, by their nature, are better able to cope with the high temperatures, heavy contaminant loads, and corrosive conditions often encountered.

Packed Tower Gas Scrubber is used for gas absorption, cooling, and recovery. Because of their high scrubbing efficiency and low power consumption, they are used in many industries for a broad range of applications. Scrubbers of this type perform best when gases to be handled are free of particles, since these tend to clog the packing. They are available in standard sizes, but can also be specially designed or modified to fit unusual service conditions. Its applications include in Chlorine, HCL, Ammonia, SO2, H2S removal.

Packaged Scrubber System is a completely "packaged", movable gas scrubber separator system that is especially designed for use in pilot plants, laboratories, or temporary locations in full size processing plants. Packaged Scrubber System uses water or other liquid to clean large quantities of objectionable gases that are inherent in most laboratories or processing applications. It can achieve contaminant removal efficiencies as high as 99.99% in many applications. Optional accessories may include a heat exchanger, a level gauge or alarm or an additional liquid storage tank. Its application include in treatment of laboratory off-gases, scrubbing of metal treating emissions, acid gas scrubbing etc.

Chemical Scrubber.

Scrubbers.

Activated Carbon Scrubber's paint booth blower exhaust will be connected to the activated carbon scrubber in which required area of activated carbon will be provided. The exhaust from the scrubber will be taken out through the ducts. This Activated carbon Dry scrubber system will contain the volatile organic compound (VOC) level in the paint booth.