valves Suppliers

Butterfly Valves can be used for special applications like isolation, throttling and control. The valves are suitable for fluids like air, water, toxic gases, vaccum, acid, chemicals, LPG, slurries & combination of gases and solid. It can be used for special applications like isolation, throttling and control. Its design standard is according to AWWA-C504 / BS-5155, the size range is from 50mm to 2000mm and its pressure class is 150.

125A Standard Sampling Valve is the standard DN50 sampling valve. It is used for sampling applications of powders, granules, pastes and liquids under process conditions in the pharmaceutical, chemical and food industries. Its nominal size is DN 50 (2’’), its Max Temperature is +180°C / +356°F, its Min Temperature is -20°C / -4°F, its design pressure is 10 bar / 145 psi, its body material is Stainless Steel 1.4435 (316L), Hastelloy, Titanium etc.

Cryogenic Valves are used in the transportation line of liquefied gas at very low temperature like liquefied natural gas, liquefied petroleum gas or liquid nitrogen from -200 °C to +65°C. All materials used are selected for their suitability to function at cryogenic temperatures. All valves are degreased for oxygen duty. It is available in both manual and actuated design.

Segmented Ball Valve have lesser weight, unobstructed flow and is an economical valve which can be successfully used in powder handling, slurry services and in abrasive services. It is a quarter turn ball valve having segment of ball in place of complete sphere ball.

Gate Valves are suitable for high temperature service. The features are it has low fugitive emission, it has spindles of high quality stainless steel, ground and polished for a very smooth finish for extended gland life, it has wide range of body-bonnet gasket options like Graphite, Spiral wound SS with Graphite, PTFE and other fillers. The valves are provided with flanged ends, screwed ends and socket weld ends. Stainless Steel Gate Valves are provided for process lines and special purposes and further carbon steel Gate Valves are provided for steam / thermic fluid and utility lines.

Lined Plug Valves features a thick, continuous PFA liner which is locked to the body by T-slots. The large sealing surfaces of this valve insure drop-tight shut-off. These valves are bidirectional and totally independent of line pressure. The primary seal to the atmosphere is between the plug and the seal band at the top of the liner. As a secondary seal, a dynamic self-adjusting , self-energized reverse-lip PFA diaphragm seal prevents stem leakage. Its application areas include Chemical Transfer, Acid Transfer, Chemical Processing etc.

Type 3241 Threaded Seat Globe Valve is designed for general service applications up to the limits of the ANSI 300 pressure class rating. These general service applications include process events such as erosion, abrasion, corrosion, cavitation, and flashing found in most process control industries.The Type 3241 has several standard options such as temperature extensions, metal bellows seals, heating jacket, high performance metal sealing trim, soft sealing trim, noise attenuation and cavitation prevention trim sets. In addition to these options the valves can be specialized to meet the exact process needs such as NACE version for sour gas service, cleaned for specific service (e.g. Oxygen, Chlorine, High Purity, etc.), or the pressure swing adsorption (PSA) design. Its size is 1/2" to 12" and the temperature range is -196 to 450 C.

3335 Lined Butterfly Control Valve is designed for general service applications up to the limits of the ANSI 300 pressure class rating. The lined seat ring of the 3335 is made of either EPDM or PTFE which is ideal for tight sealing applications with extremely corrosive media found in chemical processes. The Type 3335 design increases flow capacities but also reduces the pressure recovery factor making the design more susceptible to cavitation, flashing, and flow noise generation. The centric design and lined seat ring of this butterfly valve will increase breakaway torques required from the actuator. The size range is from 2" to 12" and the temperature range is -10 to 150 C.

1a PTFE-Lined Globe Control Valve is designed for general service applications up to the limits of the ANSI 150 pressure class rating. These general service applications focus on extremely corrosive media found in chemical processes. These control valves are designed according to the modular assembly principle, can be equipped with company's actuators and valve accessories such as positioners, limit switches, and solenoid valves. The size range is from 1" to 6" and the temperature range is from -10 to 200 C.

Type 3351 On/Off Globe Valve is used for tight closing applications for liquids, gases and vapors. The Type 3351 on/off control valve has standard options such as temperature extensions, and metal bellows seals. The Type 3351 on/off valve is assembled with a pneumatic actuator and an optional hand wheel can be added to the control valve construction. These control valves are designed according to the modular assembly principle, can be equipped with various accessories associated with on/off control such as limit switches and solenoid valves. The size is 1/2" to 4" and its temperature range is from -50 to 250 C.