valves Suppliers

Gate Valve confirm to API602 & ASME B16.34 are provided smooth machined full opening of the wedge estimation additional pressure drop across the valve. Its bolted bonnet is 800, its welded bonnet is 1500 & 2500, its size is 1/2'' to 2'' and further the pressure class is 800,1500,2500. Special material, customer specific design & internal parts provide as per requirement & on request.

PTFE Lined Diaphragm Valves are engineered to the top tough work environment of the chemical processing, pharmaceuticals, corrosive industries etc. It is provided with special design bonnet which separates working valve parts from abrasive fluid and gases so that the process media only come in contact with the body, lining and diaphragm. It is available from 25 mm x 250 mm.

PTFE Lined Butterfly Valve provides excellent chemical resistance through the use of flouropolymer line body and disc. Many features have been added to this as standard features to elevate butterfly valve of design, reliability & performance. Butterfly Valve is available in sizes ranging from 25 mm to 300 mm.

PTFE Lined Plug Valve is lined with non corrosive polymer and can resist any type of chemicals at various temperatures. It is available from 25 mm NB to 150 mm NB. Valves are virtually unaffected by changes in processing temperature or chemical concentration. In-fully-line valve, the fluorocarbon lining is locked into the valve body.

Solenoid Valves are used for controlling the flow of water, air, gases and other materials. Available in single action, double action, the valves are fabricated using quality tested raw materials like aluminum. The valve include 2/2 Way, 3/2 Way, 5/2 Way etc. The media in which it can operate include air, gases, liquid, vacuum, hazardous chemicals etc.

Butterfly Valves are widely used in chemical industries. These butterfly valves controls the flow of fluid flowing through a section of pipe. Available in various sizes, the company can provide made-to-order butterfly valve as per customers requirements. The size range is from 50mm to 1000mm. Its type is Center Disc, Ecentric Disc. Its operation is by Lever / Gear / Motor / Actuator.

Butterfly Valves are primarily used in industrial applications and the chemical industry, as well as the fields of water supply and water/waste water treatment. The concentric and single-eccentric designs are available as standard. However, the double-eccentric and triple-eccentric shut-off valves are also available for projects on request. The butterfly valve comprises a ring-shaped body in which a ring-shaped elastomer seat/liner is inserted. A washer guided through a shaft swings through a 90° rotary movement into the gasket. Depending on the version and nominal size, this enables operating pressures of up to 25 bar and temperatures up to 210 °C to be shut off. Most often, these valves are used for mechanically pure liquids, but can also be used in the right material combinations without posing any problems for slightly abrasive media or gases and vapours.

Single-Use Diaphragm Valves are primarily used in sterile applications in the pharmaceutical, food and biotechnology industries. The valves can also be used as control valves in sterile areas. Alongside 2/2-way valves, T bodies and angle bodies are also available. The features are it has max. operating pressure 4 bar, it has max. media temperature 40 °C and further has min. media temperature 5 °C.

567 BioStar Control Valve is used for controlling the inflow and outflow of bioreactors in the pharmaceutical industry. It is available in the nominal sizes DN 8 to DN 20. The body is manufactured, as standard, from block material with a grade of surface finish of Ra 0.4 µm. In addition to the PTFE diaphragm, another seal made from FKM is used. It is the new, safe solution for media controls from 0.08 to 4.1 m³/h. The valve is also optimally equipped when it comes to hygienic safety. It meets both the standards of the EHEDG cleaning test and the standards in accordance with the American 3A definition.

Trough Valve is made from Acetal and is resistant to a wide range of various chemicals. The features are it is suitable for full sun, UV stabilised, it has tough acetal body and piston, it has 15mm (1/2") and 20mm (3/4") with a long BSP parallel thread, it has long and short arm configurations for all applications and further its 13mm barbed spigot for easy attachment of silencing tube in header tanks.