chemical process equipment Suppliers in GERMANY

PTR Drum Shredder is used in the size reduction of chemical base materials, salts, minerals, lumpy products at high throughput rates. The material is fed to the drum shredder from above via an inlet chute. A rotor, equipped with sturdy beaters, crushes the material on a counter comb. If a maximum particle size is required, the drum shredder is equipped with a screen grate underneath the rotor whose hole size determines the particle size. Material is discharged to below through the screen.

PX Universal Mill is excellent for pulverizing medium hard to soft materials such as Chemicals, Pharmaceutical products etc. Material is gravity fed into the center of a grinding chamber and size reduced by impact, which takes place between the interchangeable grinding elements of a rotor and a stator arrangement. Pulverized material is discharged vertical through the bottom outlet of the machine. The stationary grinding elements are mounted on a large door, which swings to the side for easy access to the interior of the machine for clean down purposes inspection or maintenance work. Wear parts can be exchanged very easily. The door is closed with a swing bolt. A safety door locking system is standard for maximum operator protection.

PBD Single Shaft Shredders typical applications include in the coarse size reduction of soft to medium hard, crystalline and brittle coarse materials as well as deagglomeration of lumped products. It is used in the chemical and pharmaceutical industry, in the food and feed stuff industry as well as in other industries, where agglomerated products need to be crushed in order to achieve free flowing products for conveying, metering, grinding and mixing and to speed up dissolving and reaction times. Other applications are the size reduction of gypsum, slag and other residues from combustion.

PSRH Horizontal Knife Mill is usually installed on the production floor or in a pit. Typical feeding method is by hand, with a belt conveyor, a forklift, a crane or other mechanical devices into the feed hopper. The feed material is automatically fed into the rotor by means of a hydraulic, intermittently moved live bottom. The material is size reduced between the rotor- and stator knives. A screen keeps the material in the grinding chamber until the desired final size is achieved. The finished product is discharged straight down and is transported further either pneumatically or mechanically, depending on the material condition or the downstream processing step. It is widely used in chemical and plastic industries.