chemical process equipment Suppliers in INDIA

Distillation Column are tall metallic cylinder internally fitted with trays and baffle plates to attain the process of distillation more efficiently. It is used widely for the process of purification and separation in a mixture of liquids by application and removal of heat in all process industries like Chemical Process, Petroleum, Paints & Coatings, Pharmaceuticals, Bio-tech etc. The important features are it can be provided with distillation column and continuous distillation column and further the materials of construction is SS304, SS304L, SS316, SS316L, Carbon Steel etc.

Cantilever Shaft Pump finds its application wherever high reliability, low maintenance are demanded. Cantilever Shaft Pump differs substantially from the regular Sump Pump.A Cantilever Shaft Pump has bearings to support, and an overhung shaft that extends to the sump or tank. These bearings are mounted outside the liquid level so that they are never expressed to the pumping fluid.As there are no submerged bearings, the pump can handle slurries, clear liquids and high temperature liquids without any need for flushing or sealing.The pump can run dry without any bad effects or damage.The Vertical Cantilever Shaft Pump requires no seals or packing when used in the open sump.When used in the closed tank with hazardous liquids packing is used to prevent the fumes coming out.The Vertical Cantilever Shaft Pump is designed to operate much below the critical speed as the sump depth increases the shaft diameter also increases.Cantilever Shaft Pump can be used for Highly corrosive chemicals,Handling hazardous fluids and slurries,Molten salts,High temperature liquids and Molten metals.

Horizontal Hydrodynamic Seal Pump is very similar to conventional Horizontal BPO pumps in construction, except that it has with a uniquely designed expeller provided in the rear of the impeller.This expeller acts as a hydrodynamic seal which is effective when the pump is in operation.This design ensures no leakage in the entire range of operation.This pump can handle clear liquid as well as slurries and is ideally suited for any inorganic corrosive fluids where mechanical seal poses an operational challenge for maintenance engineers.The maintenance cost and down time is very low compared to the pump with a mechanical seal with a high reliability.Its capacity is up to 450 m3/hr,head range up to 60m,it is offered in 1440 & 2900 RPM, and in a wide range of metallic materials with include various grades of Stainless Steel as per ASTM, Hastelloy C&B, R-55, Inconel , Monel.

Evaporators are used for concentrating various kinds of Liquid Food, Organic / Inorganic Solutions, Industrial effluents and other liquid products using Thermal Energy. Evaporators can be of Single Effect or Multi Effect for additional components for heating and cooling. Evaporators are used in industries like Chemical Process, Pharmaceuticals, Bio-tech, Herbal Extraction Plant etc. It is provided with Vessel, Tube Bundle, required Nozzles, Manholes and instrumentation etc. The material of construction is SS304, SS316 or Carbon Steel.

Chemical Reactors are widely used for chemical process like Polymerization, Esterification, Hydrolysis, Hydrogenation and Reduction and cater to industries like Resin manufacturing, Chemical Process Plant, Paints & Coating, Pharmaceuticals, Biotech Industries, Food and Oil industries etc. The important features are its normal capacity ranges from 5 Litres-50 KL, its pressure is up to 120 kg / cm² and temperature -22° to 250°C.

Heat Exchangers are used for change of status of materials, such as liquid to gas and gas to liquid. They are used in majority of Process Industries including Chemical, Pharmaceuticals, Paint & Coatings, Resin Plants, Biotech industries, Power Plant, Petroleum Industries etc. The important features are its heat transfer is from 1m² - 60 m² or as per clients requirement, its material of construction is SS304, SS304L, SS316, SS316L, Duplex Steel or Carbon Steel and further its pressure- full vacuum is up to 10 Kg/cm².

Vertical Sump Pumps are used in applications where the liquid to be pumped cannot be primed or a conventional priming arrangement is not fail-proof. The extended shaft in these pumps drives the impeller, the liquid is pumped out through the delivery pipe.The pumps are manufactured in materials like Cast Steel, SS-316, Alloy-20 and its combinations and upto a maximum depth of immersion of 3.5 meters.These pumps are used in applications like effluent pumping, transfer of Sulfuric acid etc.These pumps are supplied with closed or semi-open impeller,depending on the application.Vertical Sump Pumps tech specifications include capacity up to 300 m3 hr,head range up to 45m,better operational comfort at 1440 RPM,flange to different standards to suit customer requirements.

Stainless Steel Agitator is known for its High efficiency, Optimal performance, Sturdy construction features.

Centrifugal Blowers are made in size 10 to 160 with air handling capacities of 300 m3/hr to 2,00,000 m3/hr against system resistance up to 1000mm w.G.. These Centrifugal Blowers are widely used in the Chemical Plants.

Screw Feeder is a gravimetric feeder operated by a closed loop control system which enables feeding at a controlled rate and exercises precise control over rate of flow. The system is capable of accepting external signals from other controllers or from the process computer, depending on the extent of plant instrumentation. These gravimetric feeders are in operation in cement, fertilizers and chemical industries. Each system consists of control panel, local panel, loadcell to measure the instantaneous load, tacho to sense the speed of the screw which is mounted inside closed trough. The screw shaft is driven by a constant speed AC motor coupled through a gear box.