chemical process equipment Suppliers in INDIA

Pressure Plunger Pumps use a cylindrical mechanism to create a reciprocating motion along an axis, which then builds pressure in a cylinder to force fluid through the pump. The pressure in the chamber actuates the valves at both the suction and discharge points. These pumps are used in applications that could range from 70 to 600 bars. Pressure Plunger Pumps capacity ranges from 500 to 30000 LPH and pressure 30 to 600 Kg/cm2. This product used for chemical injection, boiler feed, hydro testing, reverse osmosis.

High Pressure Valve Homogeniser machine which comprises of positive displacement pump and has its own significance.The displacement pumps in the homogeniser forces the product under high pressure through a small adjustable gap between the valve and the valve seat, causing turbulence and intense mixing.

Laboratory Pulverizer is a disc type grinder designed for grinding virtually any material to produce a fine mesh sample in one operation. The pulverizer is adopted for use in assay offices, metallurgical, aggregate, quarry, chemical and industrial laboratories. It is a self contained grinder furnished with rotating disc having a planetary movement in vertical plane. The pulverizer will reduce a 1 pound sample of quartz type material to 100 mesh or above in 1 minute.

Industrial Chillers are built in closed stainless steel tanks. The rigid steel frame construction has a power coating finish and hence is weather resistant. It is designed to maximise exchanger efficiency. The heat exchanger is of coaxial type and uses copper tubes in a coiled tube in tube arrangement. This arrangement maximises heat transfer rate with minimum pressure drop. To further increase heat transfer efficiency, a counter flow pattern is used that achieves maximum temperature difference. The temperature range is from -5 degree to +30 degree and the capacity is from 0.75 to 100 TR.

Heat Exchanger is primarily used for effective transference of heat from one medium to another.The media may be separated by a solid wall to prevent mixing or they may be in direct contact.

Cross Flow Cooling Towers design incorporates a FRP distribution basin with number of flower type target nozzles in it and is located at the tower top. The water, by gravity, is dispersed over the fill media uniformly and water is allowed to pass vertically down along the honey comb fills. The fan coupled directly to the motor is placed horizontally to draw air across the fill media. A small portion of water is evaporated which removes the heat from the remaining water. In warm moist air is drawn to the horizontally placed fan / motor and is discharged through the fan deck, to the atmosphere. The resultant cold water is collected at the cooling tower collection sump from where it is re-circulated to the application. Its application includes in chemical industries, distilleries and breweries plants, industries heat process etc.

RCC Cooling Tower are mostly used by the industries such as engineering industries, huge industry plants, power plants, chemical processing industries etc. The specifications are its capacity is 200 CuM/hr. to 3500 CuM/hr. per cell, its range is from 5TR to 500TR, it has high effectiveness mechanicals such as gear boxes, axial flow fans and drive shafts and further it is provided with spiral bevel type gear.

Pressure Vessels are designed to hold the liquids and gases at different pressures. Fabricated as per the drawings and specifications, the process vessel is also used for separating various materials on the basis of the magnetic properties. It is a vessel in which the pressure is obtained from an indirect source or by the application of heat from an indirect source or a direct source. Having high tensile strength, these can withstand maximum stress and can also be custom designed as specified by client.

Timber Cooling Tower is designed for the highest efficiency at the lowest operating cost. Fans gear boxes, fill and drift eliminators are optimized to deliver maximum cooling with minimum applied horsepower for lower operating cost. The system are providing more wetted surface area for uniform water distribution and higher heat transfer rate. It is widely used in air conditioning industries, chemical industries, diesel generating industries, chilling plants etc.

Shell and Tube Heat Exchanger is a device manufactured for efficient heat transfer from one medium to another. The media may be separated by a solid wall, so that they never mix, or they may be in direct contact. They are widely used in Refrigeration, Air Conditioning, Food Processing, Textile Industry, Chemical Plants, Petrochemical Plants, Steel Plants, Petroleum Refineries, Power Plants and Natural Gas Processing.