lab analytical Suppliers in INDIA

Microprocessor K.F. Moisture Titrator Model 1760 is the finest volumetric titrator available. It uses the latest microcontroller technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. The system has user friendly prompts which guide you throughout the titration process. This titrator eliminates the use of conventional delicate and fragile glass burettes and plunger systems. It uses a highly sensitive motorized dispensing system for precise control of titrant volumes. This titrator analyses the moisture concentration of liquid samples, powder, fine particles and fiber samples that are soluble in alcohol or solvents. The moisture content is displayed in ppm, %age and mg H2O.The system has 24 soft touch membrane type keys for ease of operation. Complete numeric keypad is provided so as to feed the values of sample, density, titer factor, date, time etc. comfortable. The End Point indication is given by both visual LED and audible alarm. The titrator has the facility for automatically calculating the titer factor of the Karl Fischer reagent. It uses the repeated averaging method so as to give the most accurate titer value. It has the storage facility of date, time, batch no. and final results of 20 titrations using the FIFO method. The internal battery backup ;provision has been made to store the results and the other titration parameters for a minimum of 1 month even if the instrument is not switched ON.

Digital Flame Photometer is a simple & easy to operate instrument for determination of Sodium, Potassium, Calcium & Lithium. It is an ideal instrument for soil testing labs. Digital Clinical Flame Photometer Model - 391 is a dual channel flame photometer used for simultaneous observation of Sodium, Potassium in blood serum (plasma), Urine & other type of biological fluids. Digital Flame Photometer instruments are supplied in two units viz. Main Unit and Compressor Unit. The Main Unit comprises of digital displays, detector, filters and nebulizer. The compressor unit supplies the compressed air to the main unit. The suction produced by it, draws the sample solution into the nebulizer and is sprayed as fine mist into the flame. The light emitted by the element at the characteristic wavelength is isolated by the narrow band interference filters, which then falls on to the silicon photodiode. After signal conditioning of the photodiode output, it is sent to digital converter and the results are displayed directly in ppm/meq units. The narrow band interference filters are mounted on a rotating disc fitted within the Main Unit.

Microprocessor pH Meter Model 1015 is a solid state instrument designed to provide the precise pH and mV measurements. Microprocessor pH Meter instrument uses the latest Microprocessor technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. The system has user friendly prompts which guide you through out the measurement process. The system has 8 soft touch membrane type keys for ease of operation. Microprocessor pH Meter has facility for doing upto 5 point calibration. It has the storage facility for 999 samples, which are retained in the memory even when the system is switched OFF. Microprocessor pH Meter instrument is extremely useful for agriculture and soil analysis laboratories, swimming pools, water quality control in boiler feed water, water works department, fertilizer plants, petroleum refineries, breweries, water purification plants etc.

Digital Potentiometer Model-118 is a precision instrument for potentiometric measurements. Results are displayed in millivolts on a direct digital readout by 3½ digit LED display. Digital Potentiometer is supplied with a set of 4 electrodes viz. Reference, Platinum, Silver & Glass. It is extremely useful for potentionmetric, ORP and acid base titrations. Digital Potentiometer is useful instrument for Chemistry Labs, Pharmaceutical Industries, Colleges and University Labs etc. Digital Potentiometer is having resolution of 0.1 mV, accuracy ± 1 mV, ± 1 digit and its operating temperature is 10 °C - 45 °C.

Auto Melting Point Apparatus is specially designed to find the melting point temperature of crystalline sample held within capillary tubes. Instrument uses the latest microcontroller technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. Auto Melting Point Apparatus system is equipped with microcontroller based digital display for displaying accurate results and soft touch membrane type keys for ease of operation. The sample capillary to be analyzed is held in an heating block (i.e. aluminium block) inside the heating chamber. The block holding the sample capillary tube is heated and the temperature is displayed on the 4 digit seven segment red LED display. The plateau temperature and the heating ramp rates are fully programmable using 'Plateau'/ 'Ramp' keys along with the 'Up', 'Down' keys. The plateau temperature allows the user to set a temperature to few degrees below the expected melting point temperature. Auto melting point apparatus will then heat to the programmed plateau temperature very rapidly. User can store upto 100 results (i.e. melting point temperatures) using the 'Store / Recall' key which are retained in the instruments memory even when it is switched off.

Digital pH, Conductivity & Temperature Meter Model 181 is an elegant rugged and most economical instrument for fast and accurate pH, Conductivity and Temperature measurements in any laboratory. Temperature Meter instrument is useful for monitoring acidity & alkalinity, conductivity & temperature of natural water, sea water, drinking water, treated water, waste water, brine solution, soil and other chemical solutions. 3½ digit, seven segment bright red LED display & solid state IC circuitry makes it versatile and reliable. It operates on 230V AC, 50 HZ. These are extremely useful instruments for chemical laboratories, pollution and environmental testing, public health engineering, sugar cement, paper industries, pharmaceuticals & boiler water analysis, agriculture and soil labs, brewery and transport under takings, fertilizer plants and petroleum refineries etc.

Digital Conductivity Meter is reliable and accurate test instruments for measurement of Conductivity of aqueous solutions. They measure Conductivity and TDS in five ranges. The Resolution is 0.1µS/Cm and 0.1 ppm repetitively, in the lowest range. The cell constant is flashed on a digital display & can be adjusted from the front panel. Digital Conductivity Meter instruments have the “Check” facility to calibrate the instrument. Digital Conductivity Meter instruments are ideal for monitoring salt contents in water and soluble salts in soils. They are extremely useful instruments for agriculture and soil analysis labs, swimming pools, fertilizer plants, petroleum refineries, textile plants etc.

Microprocessor pH-EC-TDS Meter Meter model 1615 is a solid state instrument designed for precise pH, EC, TDS and Temperature measurements. The instrument uses the latest microprocessor technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. The system has user friendly prompts, which guide you throughout the measurement process. Microprocessor pH-EC-TDS Meter Meter instrument has 8 soft touch membrane type keys for ease of operation. It has the storage facility for 90 samples, which are retained in the memory even when the system is switched Off. Microprocessor pH-EC-TDS Meter Meter instrument is extremely useful for chemical & pharmaceutical industry, agriculture and soil laboratories, swimming pools, water quality control in boiler feed water, water works department, fertilizer plants, petroleum refineries, breweries, water purification plants etc.

Bulk Density Apparatus Model 951 is a specially designed to study the packing down of powder beds of different pharmaceutical and chemical powders, flakes, pellets, granules and other bulk substances. Bulk Density is an essential test required in the process of tablet, capsule filling and cosmetic manufacturing. The system is equipped with microcontroller based digital display for displaying accurate and exact stroke count and soft touch membrane type keys for ease of operation. The system has 'SET', 'UP' and 'DOWN' keys, for setting the total number of required strokes (Set Count) for the current measurement session. User can set to any number of required strokes within the range from 1 to 9999 counts. The system automatically stores the last 'Set Count' value which is retained in the memory even when the instrument is switched off. Each stroke count is displayed on the 4 digit seven segment bright red LED display on the front panel. A common lock cushioned holder for both the cylinders drops down smoothly from the height and holds the cylinders. In this instrument the Up / Down (i.e. Tapping) movement of the cylinders stops automatically, at the 'Set Count' value. An audible alarm sound indicates that the current measurement session is over. The instrument uses the latest microprocessor technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility.