Buy plant utilities, boiler plants, chilling plants, chillers, furnaces, compressors, coolers, breathing apparatus
INDIA

































You Are In: Home / Equipment Categories / Plant Utilities

plant utilities Suppliers in INDIA

Muffle Furnace

Muffle Furnace is extensively used in laboratories and industries for conducting a variety of tests. The machine operates only in 230 volts A.C. and its temperature is controlled by digital temperature controller cum indicator. These are fabricated using best grade raw materials and acknowledged for the durability and user-friendly features. It is most useful for ashing, igniting and heat treating of small parts in chemical, industrial fields, colleges etc. The maximum temperatures are 1000 °C/1200 °C & working temperature is 930 °C/1130 °C.

Shanta Engineering

Pomal Industrial Area, Dhokali Kolshet Road Thane, Maharashtra, India., Thane, INDIA

INDIA INDIA

Muffle Muffle
NITROGEN GAS GENERATOR

Nitrogen Gas Generator Equipment is an inert gas atmosphere generator & incorporates two sets of columns filled with carbon molecular sieves. Under pressure these columns retain all active molecules compounds present in air like oxygen, carbon dioxide and water with the exception of the inert gases like nitrogen & argon. The nitrogen gas can be produced onsite for direct use or can be stored in nitrogen storage tanks bottles or cylinders for intermittent use. It is widely used in chemical industries for applications such as reservoir blanketing,solvent blanketing, fuel storage, polymer production and solvent paint production.

Mellcon Engineers Pvt. Ltd.

B-297, Okhla Industrial Area, Phase-1, New Delhi., New Delhi, INDIA

INDIA INDIA

NITROGEN NITROGEN
Water Tube Steam Boiler (NON-IBR)

Three-pass oil/gas/coal fired water Tube Steam Boiler (Non-IBR). » Range 100 to 600 KG/HR. » Water tube construction. » Thermal Efficiency 86 ± 2% on NCV. » Coil from Seamless ASTMA 106 GR-B Pipes. » Instant steam generation. » Easy & Economical Operation.

Aero Therm Systems Pvt. Ltd.

Plot No 1517, Phase III, GIDC, Vatwa, Ahmedabad - 382 445, INDIA., , INDIA

INDIA INDIA

Water
Industrial Thermo Compressor

Industrial Thermo Compressor is appreciated for its 15%-20% of steam consumption. Available with a wide assembly of motive gases and pressures, these products are known for rendering an unusual degree of flexibility. Its important features are it is resistant to fire, it is rust proof, it has high strength and it is cost effective in nature. It is widely applied in industries such as Chemical, Petrochemical, Pharmaceutical, Paper etc. Its material of construction involves Titanium, Teflon Lined, Impervious Graphite and various other exotic materials according to different industrial applications.

Shail Vac Engineers

No. 1-6, Royal Industrial Estate, P. O. Delad, G. I.D.C, Sayan,Surat, Gujarat,India, Surat, INDIA

INDIA INDIA

Industrial Industrial
High Performance Thermo Compressor

High Performance Thermo Compressor are used in wide range of processes to save energy. They compress low pressure steam to usable pressure levels and thereby reclaim the heat energy in the low pressure steam, which otherwise would have been wasted. The important advantages are it has no moving parts, it can be installed in any position, it is possible to mix dissimilar gases and it has low initial cost and maintenance. Its application area includes industries such as Chemical, Paper, Petrochemical, Pharmaceutical etc.

Shail Vac Engineers

No. 1-6, Royal Industrial Estate, P. O. Delad, G. I.D.C, Sayan,Surat, Gujarat,India, Surat, INDIA

INDIA INDIA

High High
Oil/Gas Fired Thermic Fluid Heaters

Oil/Gas Fired Thermic Fluid Heaters are designed for maximum efficiency, using a variety of liquid and gaseous fuels. It is designed with fuel flexibility in mind and can fire a wide range of heavy oils, light oils and gases. It allows high process temperatures at low operating pressures. Its capacities range from 0.2 million kcal/hr to 2.5 million kcal/hr and its temperature is up to 350ºC. The special features are it has high capacity heating system, over-bed & under-bed fuel firing systems can be incorporated and further it has large in-bed and convective heat transfer area.

Rakhoh Enterprises Pvt. Ltd.

S-11, T Block, M.I.D.C.,Bhosari, PUNE - 411 026. Maharashtra, India, Pune, INDIA

INDIA INDIA

Oil/Gas
Thermic Fluid Heater

Thermic Fluid Heaters are a substituent against steam or electricity for the processing of heating applications. Herein, pressurized hot water or steam is used instead of electricity. Moreover, the temperatures up to 300C can be obtained with an accuracy of +-1%. These are applicable in following industries such as chemicals, textile, food industry, metal finishing etc.

Watline Systems Pvt. Ltd.

139, Ashoka Enclave, Part-III, Sector-35 Faridabad, Haryana - 121 003, India, Faridabad, INDIA

INDIA INDIA

Thermic
Soft Capsule Encapsulation Machine

Soft Capsule Encapsulation Machine's baskets semi-drying systems are being used in line with soft gelatin Capsules Encapsulation Machines to maintain the proper shape of capsules after encapsulation that avoid the joint formations of capsules, color migration and de-shape etc.

ABS Pharma Equipments

Gali No. 23B, Star Industrial Estate, Naikpada, Waliv, Vasai East,Thane-401208 Maharashtra, India., Thane, INDIA

INDIA INDIA

Soft Soft
Two Stage Medium Pressure Compressor

Two Stage Medium Pressure Compressor consists 2 or 3 cylinders. First stage consists of single stage cylinder called low pressure cylinder is always larger in diameter than the second stage or two stage high pressure cylinder. The atmospheric air sucks into LP Cylinders through inlet filter & valves and passes to HP cylinder through inter cooler systems and HP inlet valves. The air is for higher pressure by HP cylinder and then delivered it to final destination. The highly efficient inter cooler systems provide maximum heat dissipation between stages, resulting in more air per horsepower and less trouble from carbonization. These compressors are suitable for applications where air pressure is required up to 17.5 kg/cm2g (250 psig). It is widely used in Chemical plants,Pharmaceuticals etc.

NBE Motors Pvt. Ltd.

Shed No. 1 To 7, Tirupati Estate, Opposite Bombay Housing, Milan Road, Saraspur, Ahmedabad, Gujarat., Ahmedabad, INDIA

INDIA INDIA

Two Two
BTI-1400BTI Tube Furnace

BTI-1400BTI Tube Furnace is a precision bench-top furnace using quality ceramic SiC rod as heating elements. It is widely used for materials or chemical lab to sinter all types of new materials samples under vacuum or other gases condition. It is controlled by high precision SCR ( Silicon Controlled Rectifier) digital controller with accuracy +/-1.C and 30 segments programmable up to 1400 C.

Biotechnologies Inc.

202, A. B. C. Complex, 20 Veer Savarkar Block, Madhuban Chowk, Vikas Marg, New Delhi - 110 092, Delhi, New Delhi, INDIA

INDIA INDIA

BTI-1400BTI BTI-1400BTI
12345...9

www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X