Valves allows fluid conveyance, isolation, gas venting, recycling, cross tying

valves Suppliers in INDIA

Globle Valve

Globe Valves are linear motion valves with rounded bodies from which their name is derived. During the opening of the Globe Valve the fluid flows through the space between the Edge of the Disc & the seat. These kind of valves are generally used in industry as fully open or fully closed valve, but they may be used for throttling as long as fine adjustments are not required. Globe valve are ideal choice to control the gases such as steam. Being a linear operation, and requiring a low operating force to open, globe valves can be readily actuated for remote operation. It can be straight through, angle or oblique pattern. The oblique pattern increases the flow coefficient to reduce the pressure drop.

Flowjet Valves Pvt. Ltd.

Plot No. 519, Phase II, GIDC, Kathwada, Ahmedabad-382430. India, Ahmedabad, INDIA

INDIA INDIA

Globle Globle
Forged Steel Check Valve

Forged Steel Check Valve is able to handle a variety of applications and is priced affordably. It is designed to handle temperature fluctuations easily and has good dimensional stability. The specifications are it has size range from 15NB to 50NB, it has temperature range upto 400 degree C, its end connection is Screw End, Socket Weld & Flange End, and its application include in Air, Gas, Steam, Liquid, Chemical etc.

Harshad Engineering Works

S-121 to S-124, Vivekanand Industrial Estate, Nr. Rakhial Cross Road, Rakhial, Ahmedabad - 380023, Gujarat, India., Ahmedabad, INDIA

INDIA INDIA

Forged Forged
Gate Valve

Gate Valves are used where a minimum of pressure drop through. They are designed to permit either a straight, full & free flow of the fluid or no flow at all. The construction keeps stem threads outside the valve & is recommended where high temperature, corrosive, & solids in the line might damage stem threads inside the valve. When the hand wheel is turned, the stem rises as the yoke bushing engages the stem threads enable the easy lubrication. Care must be taken, however, to protect exposed stem threads from damages.

Shree Chamunda Valves Pvt. Ltd.

23/A, Gopal Estate, B/h. Harshad Chambers, Vallabhnagar, Odhav, Ahmedabad-382415, Ahmedabad, INDIA

INDIA INDIA

Gate Gate
PP Diaphragm Valve Flange End

PP Diaphragm Valve Flange End is provided with weir type design, soft seated, raising stem construction. The valves find applications in chemical industry, power plants, sugar industries, pharmaceutical plants, salt and soda ash plants, paper & pulp industries etc. Its connection end is flanged as per ANSI B 16.5 (150#) & BS 10 (Table D/E/F) & DIN STD. The material of construction available is PP (Polypropylene) and PVDF (Polyvinylidene Fluoride).

Parthiv Polymers

Plot No. B/60, Bileshwar Industrial Estate, Opp G.V.M.M. Nr. Sardar Patel Ring Road, Odhav, Ahmedabad-382415, Gujarat, India, Ahmedabad, INDIA

INDIA INDIA

PP PP
Needle Valve

Needle Valves are available in bar stock round & square body with Screwed (BSP/NPT), Socket Weld, Butt Weld & Flange End Connection. Needle valves are similar in design and operation to the globe valve. Instead of a disk, a needle valve has a long tapered point at the end of the valve stem. The long taper of the valve element permits a much smaller seating surface area than that of the globe valve; therefore, the needle valve is more suitable as a throttle valve. Normally the material of needle valve bodies and its various parts is SS 304, SS316, SS 304L or SS 316L, but depending on the application and the system requirements brass, monel, hastalloy can also be used. Needle valves are used to control flow into delicate gauges, which might be damaged by sudden surges of fluid under pressure. The size range is from 1/4" to 2" in round and square body construction and pressure rating up to 5000 psig.

Sealmech Valves

Opp. Laxmi Ice Factory, Near Shubh-Labh Estate, Tawadipura, Shahibaug, Ahmedabad - 380 004, Ahmedabad, INDIA

INDIA INDIA

Needle
Safety Valve

Safety Valves provide protection from over-pressure in steam, gas, air and liquid lines. The valve "lets off steam" when safe pressures are exceeded, then closed again when pressure drops to a preset level. Its size is from ½” to 4” (15 mm to 100 mm). Its set pressure is 150 psig (10 kg/cm²) and the safety valves confirm to API 256.

Darshan Valve & Controls

42, Shree ji Ind, Estate Raipur Mil Saraspur, Ahmedabad -380 001, Gujarat, (India), Ahmedabad, INDIA

INDIA INDIA

Safety Safety
PTFE Lined Sampling Valve

PTFE Lined Sampling Valves are widely used in chemical and processing industry. The products are manufactured in its well-equipped production unit by latest technology. The features are it has compact design, it has low maintenance, it is corrosion resistance and further has high material strength.

Hi-Tech Applicator

1102/B, Phase-III, GIDC, Vatva, Ahmedabad - 382445, Gujarat, India, Ahmedabad, INDIA

INDIA INDIA

PTFE PTFE
Knife Gate Valve

Knife Gate Valves are exclusively designed and manufactured as per MSS SP-81 to tackle the tough working conditions in pulp & paper, mining & steel, power and chemical industries. The valves are offered in an extensive range of material where as its knife edged plate is made of from stainless steel plates of different grades irrespective of the body material, hard faced plates to suit the application. During shutting operation of the knife gate valve the knife edged plate cuts off the solids and allows the plate to seal properly.

Ashwathi Controls Pvt. Ltd.

Plot No. 253, Road No.1, GIDC Industrial Estate, Kathwada, Ahmedabad - 382 430 INDIA, Ahmedabad, INDIA

INDIA INDIA

Knife Knife
PTFE Lined Flush Bottom Valves

PTFE Lined Flush Bottom Valves find application in various industries like pharmaceutical and chemical industry. Manufactured using top quality raw materials, these products are checked on various parameters. Owing to their high pressure bearable feature, these products are highly acclaimed by the patrons across the world. The features are it is easy to maintain, it has tough design, it has heat resistance and further it is corrosion resistant.

Hi-Tech Applicator

1102/B, Phase-III, GIDC, Vatva, Ahmedabad - 382445, Gujarat, India, Ahmedabad, INDIA

INDIA INDIA

PTFE PTFE
PTFE Lined Plug Valve

PTFE Lined Plug Valve due to its trouble free operation and robust construction are highly acclaimed by the patrons across the global market. Offered PFA Lined Plug Valve are manufactured in compliance with various international standards like ANSI, API, BS, DIN etc. Its application include in petrochemical industries & refineries, fossil & nuclear power plants, power generation plants etc.

Hi-Tech Applicator

1102/B, Phase-III, GIDC, Vatva, Ahmedabad - 382445, Gujarat, India, Ahmedabad, INDIA

INDIA INDIA

PTFE PTFE

www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X