New catalyst opens door CO2 capture in coal-to-liquid process

New catalyst opens door to CO2 capture in coal-to-liquid process

10:26 AM, 16th October 2018
Researchers Emiel Hensen and Wei Chen.
Researchers Emiel Hensen and Wei Chen.

EINDHOVEN, NETHERLANDS: Researchers from the National Institute of Clean-and-Low-Carbon Energy in Beijing and Eindhoven University of Technology have developed iron-based catalysts that substantially reduce operating costs and open the door to capturing the large amounts of CO2 that are generated by CTL. Their results are published in the journal Science Advances.

To understand the significance of this achievement, some knowledge of the CTL process is required. The first stage is the conversion of coal to syngas, a mixture of carbon monoxide (CO) and hydrogen (H2).

Using the so-called Fischer-Tropsch process, these components are converted to liquid fuels. But before that can be done, the composition of the syngas has to be changed to make sure the right products come out in the end - liquid fuels. So, some of the CO is taken out of the syngas (rejected) by converting it to CO2, in a process called ‘water-gas shift’.

In this chain the researchers tackled a key problem in the Fischer-Tropsch reactor. As in most chemical processing, catalysts are required to enable the reactions. CTL catalysts are mainly iron based. Unfortunately, they convert some 30 percent of the CO to unwanted CO2, a byproduct that in this stage is hard to capture and thereby often released in large volumes, consuming a lot of energy without benefit.

The Beijing and Eindhoven researchers discovered that the CO2 release is caused by the fact that the iron-based catalysts are not pure, but consist of several components. They were able to produce a pure form of a specific iron carbide, called epsilon iron carbide, that has a very low CO2 selectivity. In other words, it generates almost no CO2 at all. The existence was already known but until now it had not been stable enough for the harsh Fischer-Tropsch process. The Sino-Dutch research team has now shown that this instability is caused by impurities in the catalyst. The phase-pure epsilon iron carbide they developed is, by contrast, stable and remains functional, even under typical industrial processing conditions of 23 bar and 2500C.

The new catalyst eliminates nearly all CO2 generation in the Fischer-Tropsch reactor. This can reduce the energy needed and the operating costs by roughly 25 million euros per year for a typical CTL plant. The CO2 that was previously released in this stage can now be removed in the preceding water-gas shift stage. That is good news, because it is much easier to capture in this stage. The technology to make this happen is called CCUS (carbon capture, utilization and storage). It has been developed by other parties and is already being applied in several pilot plants.

The conversion of coal to liquid fuels is especially relevant in coal-rich countries that have to import oil for their supply of liquid fuels, such as China and the US. “We are aware that our new technology facilitates the use of coal-derived fossil fuels. However, it is very likely that coal-rich countries will keep on exploiting their coal reserves in the decades ahead. We want to help them do this in the most sustainable way,” says lead researcher professor Emiel Hensen of Eindhoven University of Technology.

The research results are likely to reduce the efforts to develop CTL catalysts based on cobalt. Cobalt based catalysts do not have the CO2 problem, but they are expensive and quickly becoming a scarce resource due to cobalt use in batteries, which account for half of the total cobalt consumption.

Hensen expects that the newly developed catalysts will also play an import role in the future energy and basic chemicals industry. The feedstock will not be coal or gas, but waste and biomass. Syngas will continue to be the central element, as it is also the intermediate product in the conversion of these new feedstocks.

© Eindhoven University of Technology

0 Comments

Login

Your Comments (Up to 2000 characters)
Please respect our community and the integrity of its participants. WOC reserves the right to moderate and approve your comment.

Related News


Daikin, Hitachi implements image analysis in chemical processes

TOKYO, JAPAN: Daikin Industries and Hitachi Ltd will start a joint demonstration to digitalize quality control know-how in reaction process of fluoroc ...

Read more
AkzoNobel launches Camouflage coil finishes in India

PUNE, INDIA: AkzoNobel has launched Camouflage finishes – a durable coil coating product named Flexikote SP600 in India. Flexikote is suitable f ...

Read more
ExxonMobil, BASF demonstrates new gas treating solvent

HOUSTON, US: ExxonMobil Catalysts and Licensing LLC and BASF Corporation are conducting a full-scale commercial demonstration of a new gas treating so ...

Read more
Jacobs bags contract for Sirius' materials handling facility

DALLAS, US: Jacobs Engineering Group Inc has been awarded an engineering, procurement and construction (EPC) contract from Sirius Minerals PLC for its ...

Read more
Clariant's Hans joins executive board; Britta to leave

MUTTENZ, SWITZERLAND: Clariant has appointed Hans Bohnen, currently head of global business services as the new member of executive committee. Bohnen ...

Read more
KBR wins FEED contract for BP's Tortue project

HOUSTON, US: KBR Inc’s UK subsidiary has been awarded a front-end engineering design (FEED) contract by BP Plc. The contract is for Phase 1 of t ...

Read more