Researchers develop new method producing some metals

Researchers develop new method for producing some metals

11:08 AM, 26th August 2016
Researchers develop new method for producing some metals
A chart shows electrolysis of a molten semiconductor.

MASSACHUSETTS, US: The Massachusetts Institute of Technology (MIT) researchers were trying to develop a new battery, but it didn’t work out that way. Instead, thanks to an unexpected finding in their lab tests, what they discovered was a whole new way of producing the metal antimony — and potentially a new way of smelting other metals, as well.

The discovery could lead to metal-production systems that are much less expensive and that virtually eliminate the greenhouse gas emissions associated with most traditional metal smelting. Although antimony itself is not a widely used metal, the same principles may also be applied to producing much more abundant and economically important metals such as copper and nickel, the researchers said.

The surprising finding is reported in the journal Nature Communications, by Donald Sadoway, professor of materials chemistry; postdoc Huayi Yin and visiting scholar Brice Chung.

“We were trying to develop a different electrochemistry for a battery,” Sadoway explained, as an extension of the variety of chemical formulations for the all-liquid, high-temperature storage batteries that his lab has been developing for several years.

The different parts of these batteries are composed of molten metals or salts that have different densities and thus inherently form separate layers, much as oil floats on top of water.”

“We wanted to investigate the utility of putting a second electrolyte between the positive and negative electrodes” of the liquid battery, Sadoway said.

Unexpected results

But the experiment didn’t go quite as planned. “We found that when we went to charge this putative battery, we were in fact producing liquid antimony instead of charging the battery,” Sadoway said.

Then, the quest was on to figure out what had just happened.

The material they were using, antimony sulphide, is a molten semiconductor, which normally would not allow for the kind of electrolytic process that is used to produce aluminium and some other metals through the application of an electric current.

“Antimony sulphide is a very good conductor of electrons,” Sadoway said. “But if you want to do electrolysis, you only want an ionic conductor” — that is, a material that is good at conducting molecules that have a net electric charge. But by adding another layer on top of the molten semiconductor, one that is a very good ionic conductor, it turned out the electrolysis process worked very well in this “battery,” separating the metal out of the sulfide compound to form a pool of 99.9 percent pure antimony at the bottom of their cell, while pure sulphur gas accumulated at the top, where it could be collected for use as a chemical feedstock.

In typical smelting processes, the sulphur would immediately bond with oxygen in the air to form sulphur dioxide, a significant air pollutant and the major cause of acid rain. But instead, this contained process provides highly purified metal without the need to worry about scrubbing out the polluting gas.

Simple, efficient process

Electrolysis is much more efficient than traditional heat-based smelting methods because it is a single-step continuous process, Sadoway explained. The discovery of that process is what transformed aluminium, more than a century ago, from a precious metal more valuable than silver into a widely used inexpensive commodity. If the process could be applied to other common industrial metals such as copper, it would have the potential to significantly lower prices as well as reduce the air pollution and greenhouse gas emissions associated with traditional production.

“Antimony was a good test vehicle for the idea, but we could imagine doing something similar for much more common metals,” Sadoway said. And while this demonstration used an ore that is a sulphide (metal combined with sulphur), “we see no reason why this approach couldn’t be generalised to oxide feedstocks,” which represent the other major category of metal ores. Such a process would produce pure oxygen as the secondary product, instead of sulphur.

Ultimately, if steel could be produced by such a process, it could have a major impact, because “steel-making is the number one industrial source of anthropogenic carbon dioxide,” the main greenhouse gas, Sadoway said. But that will be a more difficult process to develop because of iron’s high melting point of about 1,540 C.

“This paper demonstrates a novel approach to produce transition metals by direct electrolysis of their sulphides,” said John Hryn, an institute senior fellow at Northwestern University and a senior advisor at Argonne National Laboratory, who was not involved in this work. He praised the MIT team’s use of a second electrolyte in the cell to counter the effects of electron conduction, “which has previously stymied efficient high-volume production of transition metals by electrolysis. This seminal paper should usher in a new environmentally sound methodology for extraction of metals from sulphide ores.”

Hryn added that although this demonstration used one specific metal, “The primary value of using antimony is that it can be a demonstration metal for other transition-metal recovery by electrolysis.” In addition, he said, “The potential goes beyond the production of transition metals by electrolysis. The value is the approach used to control electronic conduction in an electrolytic cell, which has value beyond metal production.”

The research was funded by the US Department of Energy, Advanced Research Projects-Energy (ARPA-E), and French energy company Total SA through the MIT Energy Initiative.

© MIT News



Your Comments (Up to 2000 characters)
Please respect our community and the integrity of its participants. WOC reserves the right to moderate and approve your comment.

Related News

Syngenta receives registration for new fungicide Elatus in France

BASEL, SWITZERLAND: Syngenta AG has received registration in France, for Elatus Plus, a fungicide based on the novel carboxamide fungicide Solatenol. ...

Read more
Yara to acquire Adubos Sudoeste’s fertilisers blending unit in Brazil

OSLO, NORWAY: Yara International ASA has signed an agreement to acquire the fertilisers blending unit of Adubos Sudoeste in Catalao (Goias State, Braz ...

Read more
Biochemists find new way to convert CO2 into fuel

LOGAN, US: By way of a light-driven bacterium, Utah State University (USU) biochemists are a step closer to cleanly converting harmful carbon dioxide ...

Read more
Keystone Aniline acquires Colour Synthesis Solutions in UK

CHICAGO, US: Keystone Aniline Corporation, a leader in the global industrial colourant marketplace has acquired Colour Synthesis Solutions Limited (CS ...

Read more
Siluria appoints Criterion Catalysts’ president as its new CEO

SAN FRANCISCO, US: Siluria Technologies Inc has appointed Robert Trout as the company's new chief executive officer (CEO). Trout will also join Siluri ...

Read more
Technip, BTG Bioliquids to build biomass-to-oil plants in Netherlands

PARIS, FRANCE: Technip SA has signed an exclusive cooperation agreement with BTG BioLiquids BV (BTL) to provide engineering, procurement and construct ...

Read more uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X